Searched for: author%3A%22Hendriks%252C%255C+M.A.N.%22
(1 - 20 of 88)

Pages

document
Zhang, F. (author), Yang, Y. (author), Hendriks, M.A.N. (author)
To assess the structural capacity of reinforced concrete structures, identifying the internal cracks is important. Acoustic emission (AE) is promising to estimate the location of internal cracks. However, the localization is influenced by many factors like arrival time picking error, presence of crack, etc., resulting in localization error. The...
journal article 2023
document
Cheng, H. (author), Weemstra, C. (author), Hendriks, M.A.N. (author), Yang, Y. (author)
Coda wave interferometry (CWI) holds promise as a technique for concrete stress monitoring. This is because the coda, which consists of multiply scattered arrivals, is the result of propagation through the medium over large distances. As such, it is sensitive to both minute structural changes and small velocity changes in that medium....
journal article 2023
document
Bresser, D. (author), Rots, J.G. (author), Hendriks, M.A.N. (author), Pari, M. (author)
Sequentially Linear Analysis (SLA), an event-by-event solution strategy in which a sequence of scaled linear analyses with decreasing secant stiffness is performed, representing local damage increments; is a robust alternative to nonlinear finite element analysis of quasi-brittle structures. Since it is based on a fixed smeared crack...
journal article 2023
document
Maus, Sönke (author), Bahafid, Sara (author), Hendriks, M.A.N. (author), Jacobsen, Stefan (author), Geiker, Mette Rica (author)
Frost salt scaling of concrete is related to cyclic freezing and melting of a few millimeter thick deicer solution on the surface of the concrete. It is almost absent when pure water is freezing and reaches a maximum at a so-called pessimum concentration that for NaCl is around 3%. Different mechanisms have been suggested to explain this...
journal article 2023
document
Pressmair, Nadine (author), Xia, Yi (author), Wu, Hongfei (author), Langelaar, Matthijs (author), Hendriks, M.A.N. (author), Majdouba, Ahmad (author), Mogra, Mihir (author), Grisaro, Hezi (author), Amir, Oded (author), Kromoser, Benjamin (author)
Concrete, as the most widely used construction material, is associated with a high environmental impact. Within the present study, structural optimization is the method of choice to counter this issue. The entire process, from optimization, to design, experiments and numerical simulation is outlined. Embedded in the framework of a design...
journal article 2023
document
Zhang, F. (author), Yang, Y. (author), Hendriks, M.A.N. (author)
Monitoring or identifying structural cracks is crucial for assessing the health of existing concrete structures. Key information about structural cracking encompasses the location of the crack and its kinematics, which include movements perpendicular and parallel to the crack face. Acoustic emission (AE) is a sensitive technique for detecting...
journal article 2023
document
Van Steen, C. (author), Van Beirendonck, T. (author), Vrijdaghs, R. (author), Hendriks, M.A.N. (author), Verstrynge, E. (author)
Bond deterioration is one of the major consequences of reinforcement corrosion in reinforced concrete (RC) structures. In this paper, a two-phased numerical modelling approach is presented that aims to determine the constitutive behaviour (bond–slip) at the reinforcement-concrete interface at a certain corrosion level. The novelty of the...
journal article 2023
document
Xu, Jie (author), Hendriks, M.A.N. (author), Rots, J.G. (author), Tsouvalas, A. (author)
Due to the accompanying severe consequences of explosions, the blast puts a great threat to public security. Nonlinear finite element analysis is a possible method for civil engineers to check the integrity of the structures under blast loading without underestimating the limit of the structures. However, different choices of element types...
conference paper 2023
document
Ibrahim, M.S. (author), Poliotti, M. (author), Yang, Y. (author), Hendriks, M.A.N. (author)
Typically precast girders are designed and utilized as simple supported members. Alternatively, the precast girders can be made continuous at the intermediate support using cast-in-place concrete topping. Once the girders are made continuous, time-dependent restraint moments will occur. The magnitude of the restraint moment is mainly affected by...
conference paper 2023
document
Saidmurodov, Saidkomil S. (author), Jacobsen, Stefan (author), Hendriks, M.A.N. (author), Shamsutdinova, Guzel (author)
The process of ice melting during abrasive interactions with concrete is essential in a variety of contact phenomena. In this paper, we refer to abrasive tests for different samples of concrete with roughness in the range of 9–35 μm. The experimental conditions were: 1 MPa ice pressure, ambient temperature −10 °C, average sliding velocity 0–0.16...
journal article 2022
document
Ibrahim, M.S. (author), Yang, Y. (author), Roosen, M.A. (author), Hendriks, M.A.N. (author)
There are a large number of precast girder bridges in the Netherlands that are made continuous utilizing cast in situ layers and cross beams. When controlled by the Eurocode minimum shear reinforcement requirement, the majority of these bridges that were constructed before the 1970s have insufficient amount of transverse reinforcement, which...
conference paper 2022
document
Lu, J. (author), Yang, Y. (author), Hendriks, M.A.N. (author)
For reinforced concrete members without shear reinforcement, the shear failure is characterized by the formation of a critical flexural shear crack. Recently experimental observations making use of Digital Image Correlation (DIC) by many researchers suggested the significance of geometric characteristics and kinematic conditions of critical...
conference paper 2022
document
Lantsoght, E.O.L. (author), Yang, Y. (author), Hendriks, M.A.N. (author)
Om de vele bestaande betonnen bruggen – die de komende tijd het einde van hun beoogde levensduur bereiken – te beoordelen, is het belangrijk een aanpak met verschillende niveaus van beoordelen te gebruiken. Waar een handberekening niet volstaat, kunnen geavanceerde modellen, meetgegevens, belastingproeven, monitoren, inzichten van...
journal article 2022
document
de Putter, Arjen (author), Hendriks, M.A.N. (author), Rots, J.G. (author), Yang, Y. (author), Engen, Morten (author), van den Bos, Ab A. (author)
Nineteen 2D nonlinear finite element analysis (NLFEA) solution strategies were benchmarked against a wide variety of 101 experiments on reinforced concrete beams failing in bending, flexural shear, or shear compression. The relatively high number of solution strategies was motivated by the conviction that choices for the constitutive models,...
journal article 2022
document
Zhang, F. (author), Yang, Y. (author), Fennis, Sonja A.A.M. (author), Hendriks, M.A.N. (author)
Acoustic emission (AE) signal parameters can be used to classify the source type in concrete structures. However, signal parameters are influenced by the wave propagation from the source to the receiver, leading to wrong source classification results, especially for monitoring large concrete structures. This paper experimentally evaluates the...
journal article 2022
document
Aydin, B.B. (author), Binici, Baris (author), Hendriks, M.A.N. (author), Tuncay, Kagan (author)
Significant infill wall damage in reinforced concrete frame buildings was observed in the past earthquakes. A vast number of numerical approaches have been proposed to estimate the non-linear behavior of infilled frames at different scales. Mesoscale lattice models were successfully used in the past to simulate the behavior of reinforced...
journal article 2022
document
Zhang, F. (author), Yang, Y. (author), Naaktgeboren, N.M. (author), Hendriks, M.A.N. (author)
This paper proposes a new damage identification method, namely, the probability density field of acoustic emission (AE) events. This new method provides a different perspective to deal with the uncertainties in the source localization process. We treat the source location as a random variable, and estimate its probability density field based...
journal article 2022
document
Kongshaug, Simen Sørgaard (author), Hendriks, M.A.N. (author), Kanstad, Terje (author), Markeset, Gro (author)
Alkali–silica reaction (ASR) in concrete causes expansion and degradation of the material, which might give adverse structural consequences. From the structural engineer point view, the greatest concern is if ASR leads to loss of structural integrity. Two natural questions arise when assessing existing concrete structures affected by ASR: (1)...
journal article 2022
document
Bahafid, Sara (author), Hendriks, M.A.N. (author), Jacobsen, Stefan (author), Geiker, Mette (author)
We simulate the glue-spall stress due to mechanical interactions between a frozen saline solution (brine-ice composite) and a non-air entrained concrete surface including the impact of the micro-structure of the frozen solution. The presence of brine channels at the ice/concrete interface was found to be a prerequisite to induce stress during...
journal article 2022
document
Xia, Yi (author), Langelaar, Matthijs (author), Hendriks, M.A.N. (author)
Strut-and-Tie modelling (STM) has been widely applied to design D-regions of reinforced concrete structures. For economic and environmental reasons there is a need for optimized Strut-and-Tie models. How to optimize Strut-and-Tie models considering multiple load combinations has not been investigated extensively in the literature. In order to...
journal article 2022
Searched for: author%3A%22Hendriks%252C%255C+M.A.N.%22
(1 - 20 of 88)

Pages