Optical Simulation-Aided Design and Engineering of Monolithic Perovskite/Silicon Tandem Solar Cells

Monolithic perovskite/c-Si tandem solar cells have attracted enormous research attention and have achieved efficiencies above 30%. This work describes the development of monolithic tandem solar cells based on silicon heterojunction (SHJ) bottom- and perovskite top-cells and highlights light management techniques assisted by optical simulation...

Slow Shallow Energy States as the Origin of Hysteresis in Perovskite Solar Cells

Organic-inorganic metal halide perovskites have attracted a considerable interest in the photovoltaic scientific community demonstrating a rapid and unprecedented increase in conversion efficiency in the last decade. Besides the stunning progress in performance, the understanding of the physical mechanisms and limitations that govern perovskite...

Towards bifacial silicon heterojunction solar cells with reduced TCO use

Reducing indium consumption, which is related to the transparent conductive oxide (TCO) use, is a key challenge for scaling up silicon heterojunction (SHJ) solar cell technology to terawatt level. In this work, we developed bifacial SHJ solar cells with reduced TCO thickness. We present three types of In₂O₃-based TCOs,...

Achieving 23.83% conversion efficiency in silicon heterojunction solar cell with ultra-thin MoO_x hole collector layer via tailoring (i)a-Si:H/MoO_x interface

Thin films of transition metal oxides such as molybdenum oxide (MoO_x) are attractive for application in silicon heterojunction solar cells for their potential to yield large short-circuit current density. However, full control of electrical properties of thin MoO_x layers must be mastered to obtain an efficient hole...

Room-temperature sputtered tungsten-doped indium oxide for improved current in silicon heterojunction solar cells

The window layers limit the performance of silicon heterojunction (SHJ) solar cells with front and back contacts. Here, we optimized tungsten-doped indium oxide (IWO) film deposited by radio frequency magnetron sputtering at room temperature. The opto-electrical properties of the IWO were manipulated when deposited on top of thin-film silicon...

Colored optic filters on c-Si IBC solar cells for building integrated photovoltaic applications

Building Integrated Photovoltaic systems can produce a significant portion of the energy demand of urban areas. Despite their potential, they remain a niche technology that architects and project engineers still find esthetically limited. The dark blue or black color of standard photovoltaic panels is considered inappropriate for restoration...

Optimization of Three-Terminal Perovskite/Silicon Tandem Solar Cells

We use simulations to optimize perovskite/silicon tandem solar cells in a novel three-terminal configuration, with one terminal at the front and two at the rear. We consider configurations in which the top cell has either the inverted or the same polarity as the bottom cell. Our goal is to minimize the optical losses, to compare the...

Material properties of LPCVD processed n-type polysilicon passivating contacts and its application in PERPoly industrial bifacial solar cells

We present a detailed material study of n⁺-type polysilicon (polySi) and its application as a carrier selective rear contact in a bifacial n-type solar cell comprising fire-through screen-printed metallization and 6" Cz wafers. The cells were manufactured with low-cost industrial process steps yielding V_ocs from 676 to...

Plasmonic nanoparticle films for solar cell applications fabricated by size-selective aerosol deposition

A soft deposition method for incorporating surface plasmon resonant metal nanoparticles within photovoltaic devices was studied. This self-assembly method provides excellent control over both nanoparticle size and surface coverage. Films of spherical Ag nanoparticles with diameter of ?100 nm were fabricated by depositing size-selected aerosols...

Improved light trapping in microcrystalline silicon solar cells by plasmonic back reflector with broad angular scattering and low parasitic absorption

We show experimentally that the photocurrent of thin-film hydrogenated microcrystalline silicon (?c-Si:H) solar cells can be enhanced by 4.5?mA/cm2 with a plasmonic back reflector (BR). The light trapping performance is improved using plasmonic BR with broader angular scattering and lower parasitic absorption loss through tuning the size of...

The role of oxide interlayers in back reflector configurations for amorphous silicon solar cells

Thin oxide interlayers are commonly added to the back reflector of thin-film silicon solar cells to increase their current. To gain more insight in the enhancement mechanism, we tested different back reflector designs consisting of aluminium-doped zinc oxide (ZnO:Al) and/or hydrogenated silicon oxide (SiOx:H) interlayers with different metals ...

Advanced Light Management Approaches for Thin-Film Silicon Solar Cells

Light management is important for improving the performance of thin-film solar cells. Advanced concepts of efficient light scattering and trapping inside the cell structures need to be investigated. An important tool for design and optimisation of the concepts present optical modelling and simulation. In the article a model of light scattering...