Design of a Direct Numerical Simulation of Flow and Heat Transfer in a T-junction

Design of a Direct Numerical Simulation of Flow and Heat Transfer in a T-junction

Ajay Kumar, Aniketh (TU Delft Aerospace Engineering)

Mathur, Akshat (mentor)
Gerritsma, M.I. (mentor)
van Zuijlen, A.H. (graduation committee)
Bombelli, A. (graduation committee)

Delft University of Technology

Delft University of Technology

Aerospace Engineering

2021-11-30

Several investigations have been undertaken to study the velocity and temperature fields associated with the thermal mixing of fluids, and resulting thermal striping in a T-junction. The T-junction thermal mixing and fatigue phenomenon is a major area of study for the purposes of safety, maintenance and operational life in the nuclear industry, in which fluid mixing occurs in cooling circuits for the nuclear reactor. The existing body of work on T-junctions mainly comprises of experimental references performed at high values of Reynolds numbers. However, these available experimental databases are not
sufficient to describe the involved physics in adequate detail, and, due to experimental limitations, accurate data on velocity and temperature fluctuations in regions close to the wall are not accessible. Computational Fluid Dynamics (CFD) can play an important role in predicting such complex flow features. However, predicting complex thermal fatigue phenomena is a challenge for the available momentum and heat flux turbulence models, which also require extensive validation.
It was realised that a comprehensive Direct Numerical Simulation (DNS) of a T-junction was required as a benchmark for validation purposes, but also to better understand the underlying physical phenomena of thermal mixing in the fluid and thermal fatigue in the solid walls. The aim of the thesis is to thus design such a reference DNS experiment of a thermal fatigue scenario calibrated using Reynolds-Averaged Navier-Stokes (RANS) simulations. The feasibility of scaling down the Reynolds number from experimental cases to a computationally-feasible range is investigated. The junction corner shape is also modified to a slightly rounded corner, ensuring that the underlying fundamental physical phenomena of turbulence and thermal mixing flow features were preserved. The pipe lengths of the model were calibrated to ensure there would be no interference of the upstream developing region on the thermal mixing at the junction, and the outlet boundary conditions. A sample proof-of-concept under-resolved DNS (UDNS) case, with high- and low-Prandtl number passive temperature scalars, with iso-temperature, iso-flux and mixed (Robin) wall boundary conditions, is simulated and presented. This proof-of-concept simulation contributes to the finalization of the fully-resolved DNS in computational grid size selection, transient characteristics, computational costs, and additionally, the implementation of the Robin boundary condition in the fully-resolved DNS.

T-junction
Thermal mixing
DNS
RANS

http://resolver.tudelft.nl/uuid:0dfccce3-7fea-478c-9895-8a6011ecd145

2023-11-30

Student theses

master thesis

© 2021 Aniketh Ajay Kumar