Title
Consistency of Mechanical Properties of 3D Printed Strain Hardening Cementitious Composites Within One Printing System
Author
Nefs, Karsten (Eindhoven University of Technology)
van Overmeir, A.L. (TU Delft Materials and Environment)
Salet, Theo A.M. (Eindhoven University of Technology)
Suiker, A. S.J. (Eindhoven University of Technology)
Šavija, B. (TU Delft Materials and Environment) 
Schlangen, E. (TU Delft Materials and Environment)
Bos, Freek (Eindhoven University of Technology)
Contributor
Buswell, Richard (editor)
Blanco, Ana (editor)
Cavalaro, Sergio (editor)
Kinnell, Peter (editor)
Date
2022
Abstract
Previous research has shown that the material properties of a three-dimensional printed strain hardening cementitious composite (3DP-SHCC) can significantly vary, depending on the printing system with which it is produced. However, limited research has been performed on the reproducibility of hardened mechanical properties under identical printing conditions. In this study, the consistency of hardened properties, including compressive strength, flexural strength and deflection, and tensile strength and strain, was tested from materials printed during three separate but identical printing sessions. The research shows that with 3DP-SHCC, significant variations in mechanical properties between printing sessions can be expected.
Subject
3DCP
Printing control
SHCC
Variation
To reference this document use:
http://resolver.tudelft.nl/uuid:0e49131b-bd62-4b45-87dd-9107423b5ea2
DOI
https://doi.org/10.1007/978-3-031-06116-5_22
Publisher
Springer
Embargo date
2022-12-25
ISBN
978-3-031-06115-8
Source
Third RILEM International Conference on Concrete and Digital Fabrication: Digital Concrete 2022, 37
Event
3rd RILEM International Conference on Digital Fabrication with Concrete, 2022-06-27 → 2022-06-29, Loughborough University, Loughborough, United Kingdom
Series
RILEM Bookseries, 2211-0844, 37
Bibliographical note
Green Open Access added to TU Delft Institutional Repository ‘You share, we take care!’ – Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.
Part of collection
Institutional Repository
Document type
book chapter
Rights
© 2022 Karsten Nefs, A.L. van Overmeir, Theo A.M. Salet, A. S.J. Suiker, B. Šavija, E. Schlangen, Freek Bos