3D building change detection between current vhr images and past LiDAR data

3D building change detection between current vhr images and past LiDAR data

Zhou, K. (TU Delft Optical and Laser Remote Sensing)
Gorte, B. (University of New South Wales)
Lindenbergh, R.C. (TU Delft Optical and Laser Remote Sensing)
Widyaningrum, E. (TU Delft Optical and Laser Remote Sensing)

2018-05-30

Change detection is an essential step to locate the area where an old model should be updated. With high density and accuracy, LiDAR data is often used to create a 3D city model. However, updating LiDAR data at state or nation level often takes years. Very high resolution (VHR) images with high updating rate is therefore an option for change detection. This paper provides a novel and efficient approach to derive pixel-based building change detection between past LiDAR and new VHR images. The proposed approach aims notably at reducing false alarms of changes near edges. For this purpose, LiDAR data is used to supervise the process of finding stereo pairs and derive the changes directly. This paper proposes to derive three possible heights (so three DSMs) by exploiting planar segments from LiDAR data. Near edges, the up to three possible heights are transformed into discrete disparities. A optimal disparity is selected from a reasonable and computational efficient range centered on them. If the optimal disparity is selected, but still the stereo pair found is wrong, a change has been found. A Markov random field (MRF) with built-in edge awareness from images is designed to find optimal disparity. By segmenting the pixels into plane and edge segments, the global optimization problem is split into many local ones which makes the optimization very efficient. Using an optimization and a consecutive occlusion consistency check, the changes are derived from stereo pairs having high color difference. The algorithm is tested to find changes in an urban areas in the city of Amersfoort, the Netherlands. The two different test cases show that the algorithm is indeed efficient. The optimized disparity images have sharp edges along those of images and false alarms of changes near or on edges and occlusions are largely reduced.

Change detection
Disparity
DSM quality
LiDAR data
MRF
Optimization
VHR images

http://resolver.tudelft.nl/uuid:296bedba-deb3-4109-a9ef-0e8de8b86a21

https://doi.org/10.5194/isprs-archives-XLII-2-1229-2018

1682-1750

International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, 42 (2), 1229-1235

ISPRS TC II Mid-term Symposium, 2018-06-04 → 2018-06-07, Riva del Garda, Italy

Institutional Repository

journal article

© 2018 K. Zhou, B. Gorte, R.C. Lindenbergh, E. Widyaningrum