Print Email Facebook Twitter Design of a large inflatable kiteplane Title Design of a large inflatable kiteplane Author Breukels, J. Ockels, W.J. Faculty Aerospace Engineering Department Aerospace Design, Integration and Operations Date 2007-01-01 Abstract This paper presents the various structural considerations in designing a large inflatable kiteplane. Material issues are addressed and a departure from conventional inflatable kites is suggested by using a single material instead of a structural foil and an internal gas barrier. Furthermore, rigging the kite using bridle lines is given attention. It is shown that the required internal pressure for a beam to keep it stiff is greatly influenced by the location of the bridle line. An optimum placement of the bridle line is found through analysis of the bending behavior of the beam in combination with a stress-based wrinkling criterion. To reference this document use: http://resolver.tudelft.nl/uuid:5a24676e-ef16-43c6-b8cf-a72bba08d269 Publisher American Institute of Aeronautics and Astronautics Source 48th AIAA Structures, Structural Dynamics and Materials Conference, Waikiki, Hawaii, USA, 2007 Part of collection Institutional Repository Document type journal article Rights (c) 2007 Breukels, J. ; Ockels, J.W. ; American Institute of Aeronautics and Astronautics Files PDF AIAApaper69914Breukels1.pdf 678.24 KB Close viewer /islandora/object/uuid:5a24676e-ef16-43c6-b8cf-a72bba08d269/datastream/OBJ/view