On the influence of the adhesive and the adherend ductility on mode I fracture characterization of thick adhesively-bonded joints

On the influence of the adhesive and the adherend ductility on mode I fracture characterization of thick adhesively-bonded joints

Saleh, M. (TU Delft Structural Integrity & Composites; Technology Innovation Institute)
Budzik, Michal K. (Aarhus University)
Saeedifar, M. (TU Delft Structural Integrity & Composites)
Zarouchas, D. (TU Delft Structural Integrity & Composites)
Teixeira De Freitas, S. (TU Delft Structural Integrity & Composites)

2022

Thicker bondlines along with manufacturing-tolerant and fracture-resistant adhesives are trends visible across different industries, especially maritime. In this work, two contrasting adhesives: an elastic-brittle epoxy-based, and a nonlinear-ductile methyl methacrylate (MMA) are characterized and compared via tensile, compact tension (CT) and double cantilever beam (DCB) testing, for steel-to-steel adherends. Significant differences are captured between the two bonding materials in terms of the energy required for crack growth: in the MMA “ductile” adhesive is ∼4 and 10 times more than for the epoxy “relatively brittle” adhesive for CT and DCB testing, respectively. While epoxy bondlines fail due to a symmetric in-plane crack, the MMA bondlines experience multiple cracking originating from high deformations and Poisson's effects. Moreover, in the case of MMA adhesive, the DCB testing led to plastic deformation of steel adherends. The existing evaluation protocols are adopted for data reduction and the effect of plastic dissipation is theoretically addressed. Despite adherend plasticity, it is concluded that the crack growth is driven by the elastic energy release, and thus, after small correction taking into account initial adherend plasticity, the existing simple models can still be used. This study highlights the potential use of ductile adhesive instead of the commonly used brittle ones to significantly improve the adhesively bonded joints in maritime applications in which thick bondlines, manufacturing-tolerant and fracture-resistance characteristics are required.

Adhesive testing
Fracture testing
Methyl methacrylate (MMA)
Plastic deformation
Thick bondlines

http://resolver.tudelft.nl/uuid:73f44376-2913-439e-89e9-f29cc3d5ff76

https://doi.org/10.1016/j.ijadhadh.2022.103123

0143-7496

International Journal of Adhesion and Adhesives, 115

Institutional Repository

journal article

© 2022 M. Saleh, Michal K. Budzik, M. Saeedifar, D. Zarouchas, S. Teixeira De Freitas