Structural monitoring of a church influenced by mining settlements using spaceborne remote sensing

Structural monitoring of a church influenced by mining settlements using spaceborne remote sensing

Brouwers, Raymond (TU Delft Civil Engineering & Geosciences)

Giardina, Giorgia (mentor)
Hendriks, M.A.N. (graduation committee)
Malinowska, D.U. (graduation committee)
Milillo, Pietro (graduation committee)
Mehrotra, A.A. (graduation committee)

Delft University of Technology

Geoscience and Remote Sensing

2022-04-25

Structural health monitoring of buildings is useful for a few reasons. It provides information on the usage and cause of damage to a building. This can result in targeted maintenance or allow for potential improvements.

Traditionally, a building can be monitored by installing sensors during construction or maintenance work. These can be strain gauges, inertial measurement units or surveying equipment. However, not all buildings have such sensors installed due to lack of space or the cost of the equipment. To overcome this, a spaceborne technique shows potential, namely multi-temporal interferometric synthetic aperture radar (MT-InSAR). This technique has already been applied to monitor damage to sections of buildings or large structures, for instance facades or deformations of bridges. In the context of entire buildings, the result of an MT-InSAR analysis has not yet been paired with a computational model. This is mainly due to the relatively small scale of a building and low spatial density of the displacement data.

This thesis integrates remote sensing data, acquiring displacements due to mining, with a computational structural finite element model of a church structure. The displacements have been interpolated using MT-InSAR data, which contains projections of nonlinear displacements in vertical and West-East directions. The interpolation has been performed using two techniques. The first is Ordinary Kriging, which is used to obtain a general insight into the deformations and the shape of the deformed region near the church. The second uses the least squares method to fit polynomial shape functions. The resulting displacements of the least squares analysis have been integrated into a nonlinear structural finite element model. The structural model consists of a soil-structure interaction model and nonlinear material properties, and is used to assess crack propagation.

Integrating remote sensing with computational modelling, shows potential in providing a monitoring technique for buildings. The interpolation method can be used to obtain displacements at a building, even when the spatial density of the InSAR analysis is limited. The main limitation is the information on the horizontal displacements obtained by the InSAR technique, where the displacement along the North-South is unknown. Furthermore, the structure and integration can then be performed using a finite element model, which can follow crack propagation and account for soil-structure interaction.

MT-InSAR
finite element modeling
mining deformations
church structure

http://resolver.tudelft.nl/uuid:ccba7c98-282f-45c8-8914-5b8bccb71f03

2024-04-25

Student theses

master thesis

© 2022 Raymond Brouwers