Searched for:
(1 - 20 of 62)

Pages

document
Wu, Yue (author), Liu, Xiuming (author), Li, Q. (author), Chen, Boxuan (author), Luo, Peng (author), Pronk, Arno (author), Mergny, Elke (author)
By using inflatable moulds and then spraying cellulose-water mixture, one ice dome and two ice towers were built in Harbin in December 2016. During the whole process, form-finding of the inflatable moulds as well as the construction of these ice composite shell structures are very important for the final results.
The mould for the ice dome...
conference paper 2017
document
Shuang, Weifang (author), Zhang, S. (author), Wu, Xue (author), van Kampen, E. (author), Chu, Q. (author)

conference paper 2017
document
Wu, H. (author), Qian, Queena (author), Visscher, H.J. (author), Straub, A. (author)
Sustainable development has been the focus of all major industries in the world, especially in the construction industry. As one of the sustainable construction modes, housing industrialization (HI) is now absorbing a growing number of attentions that lead the industry to go green. However, the implementation of HI in China is far from...
conference paper 2017
document
Wörhoff, Kerstin (author), Prak, Albert (author), postma, F (author), Leinse, A (author), Wu, K. (author), Peters, T.J. (author), Tichem, M. (author), Amaning-Appiah, B. (author), Renukappa, V. (author), Vollrath, G. (author), Balcells-Ventura, J. (author), Uhlig, P. (author), Seyfried, M. (author), Rose, D. (author), Santos, Raquel (author), Leijtens, XJM (author), Flintham, B. (author), Wale, M. (author), Robbins, D. (author)
Fully automated, high precision, cost-effective assembly technology for photonic packages remains one of the main challenges in photonic component manufacturing. Next to the cost aspect the most demanding assembly task for multiport photonic integrated circuits (PICs) is the high-precision (±0.1 μm) alignment and fixing required for optical I...
conference paper 2016
document
Wu, K. (author), Peters, T.J. (author), Tichem, M. (author), Postma, Ferry (author), Prak, Albert (author), Wörhoff, Kerstin (author), Leinse, Arne (author)
. The actuators are for use in a novel alignment concept for multi-port photonic integrated circuits (PICs), in which the fine alignment is taken care of by positioning of suspended...
conference paper 2016
document
Kontakis, A. (author), Wu, S. (author), Verschuur, D.J. (author)
The applicability of a deblending method is directly related to acquisition parameters, such as source and detector locations. We formulate focal deblending in two alternative ways. In the first case, the double focal transform is used, which relies on a well-sampled source and detector dimension. In the second case, the single-sided focal...
conference paper 2016
document
Li, Q. (author), Borgart, A. (author), Wu, Y (author)
conference paper 2016
document
Ching, J. (author), Wu, S.-H (author), Phoon, K.-K. (author)
Due to limited information in site investigation, it is not possible to obtain the actual values for the mean, standard deviation, and scale of fluctuation of a soil property of interest. The deviation between the estimated values and actual values is called the statistical uncertainty. There are two schools of thoughts on how to model the...
conference paper 2015
document
Wu, W. (author)
Most of the research findings in evaluating slope stability using limit analysis are chart-based. No such stability chart is available to cover a wide range of material strength, slope geometries and external disturbance. Practitioners find it difficult to use the charts for a specific slope project. Compared with a large number of existing...
conference paper 2015
document
Naeimi, M. (author), Li, Z. (author), Dollevoet, R.P.B.J. (author), Wu, J. (author), Petrov, R.H. (author), Sietsma, J. (author)
The coupled mechanical–thermal behaviour of wheel and rail materials under rolling contact is studied to determine the temperature rise due to the frictional heat. The wheel–rail frictional rolling contact problem is solved using the three–dimensional finite element (FE) method. The FE model considers the wheel tread–rail top contact with...
conference paper 2015
document
It is well known that fully developed turbulent free shear layers exhibit a high degree of order, characterized by large-scale coherent structures, i.e. spanwise vortex rollers. Extensive experimental investigations show that such organised motions bear remarkable resemblance to inviscid instability waves, and their main characteristics,...
conference paper 2015
document
Li, Q. (author), Wu, Yue (author), Borgart, A. (author)
Hanging models play an important role in shaping a structure since a very early age, and were favored by A. Gaudi, H. Isler, F. Otto and other architects or engineers. Nowadays, with the development of numerical analysis theory and computer technique, it is more accurate and convenient to simulate these physical models via numerical means. Based...
conference paper 2015
document
Li, Q. (author), Borgart, A. (author), Wu, Yue (author)
Discrete networks is a kind of form-active structural system which actively change its shape under varying load conditions. And for this kind of structural system, form-finding is the initial and essential part in their design process. Before the computer age, people complete the form-finding process using physical models, while with the...
conference paper 2015
document
Naeimi, M. (author), Li, Z. (author), Petrov, R.H. (author), Dollevoet, R.P.B.J. (author), Sietsma, J. (author), Wu, J. (author)
The substantial similarity of fatigue mechanism in a new test rig for rolling contact fatigue (RCF) has been investigated. A new reduced-scale test rig is designed to perform controlled RCF tests in wheel-rail materials. The fatigue mechanism of the rig is evaluated in this study using a combined finite element-fatigue prediction approach. The...
conference paper 2014
document
Wu, L. (author), Tiso, P. (author)
Model order reduction techniques are widely applied in the floating frame of reference. The use of linear vibration modes, however, is not applicable when the elastic deformations become finite. In this paper, the non-linear elastic formulation, where the higher-order terms will be included in the strain energy expression to consider the bending...
conference paper 2014
document
Zhang, Y. (author), Wu, B. (author), Zhou, J. (author), Ye, G. (author), Shui, Z. (author)
Concrete containing supplementary cementitious materials (SCMs) has different durability properties from that containing pure Portland cement. The durability of concrete is always associated with the properties of microstructure, especially pore structure. Pressurization–Depressurization Cycling Mercury Intrusion Porosimetry (PDC-MIP) was...
conference paper 2014
document
Wu, P. (author), Voskuijl, M. (author), Van Tooren, M.J.L. (author)
A novel take-off and landing system using ground based power is proposed in the EUFP7 project GABRIEL. The proposed system has the potential benefit to reduce aircraft weight, emissions and noise. A preliminary investigation of the feasibility of the structural design of the connection mechanism between aircraft and ground system has been...
conference paper 2014
document
Prajer, M. (author), Wu, X. (author), Garcia Espallargas, S.J. (author), Van der Zwaag, S. (author)
Polymers reinforced with high performance fibres are successfully replacing metal alloys in lightweight aircraft structures. A critical factor in structural design is the resistance of a structure to progressive damage which develops during its service time. The brittle nature of matrix cracking is the main source of composite failure initiating...
conference paper 2013
document
Prajer, M. (author), Wu, X. (author), Garcia Espallargas, S.J. (author), Van der Zwaag, S. (author)
Polymers reinforced with high performance fibres are successfully replacing metal alloys in lightweight aircraft structures. A critical factor in structural design is the resistance of a structure to progressive damage which develops during its service time. The brittle nature of matrix cracking is the main source of composite failure initiating...
conference paper 2013
document
Zhu, G. (author), Zhou, Y. (author), Wu, Z. (author), Tang, J. (author), Dong, B. (author), Han, N. (author), Xing, F. (author)
The microcapsules of epoxy E-51 resin encapsulated by cured itself were prepared by interfacial curing reaction, in which ethylenediamine (EDA) was employed as curing agent and sulfonated copolymer of styrene and maleic anhydride (SMA) as emulsifying agent. It’s found the morphology of microcapsules strongly depend on reaction time and EDA...
conference paper 2013
Searched for:
(1 - 20 of 62)

Pages