- document
-
't Hart, W.G.J. (author), Schra, L. (author)An experimental investigation.was performed on 80 mm thick plate material of 7OIO-T7651 and 7OIO-T73651 developed by Alcan Industries Ltd in U.K. The testing programme involved: tensile tests, fracture toughness, stress corrosion and fatigue tests. For comparison a similar investigation vas carried out on 7075-T7351 Alcoa plate material.report 1979
- document
-
't Hart, W.G.J. (author), Schra, L. (author)The Al-Zn-Mg-Cu alloy 7050 produced by Alcoa is a typical plate and forging alloy because of its low quench sensitivity. In order to compare this alloy with the earlier tested plate alloy 7010 an experimental programme was performed involving tensile, fracture toughness, and fatigue testing. In addition stress corrosion crack initiation and...report 1980
- document
-
't Hart, W.G.J. (author), Schra, L. (author)The engineering properties of PM alloy X7091-T7E69 forgings were compared with those of forgings of the IM alloys 7075-T73, 7175-T736, 7050-T736 and 7010-T736. The properties considered were: strength, fracture toughness, fatigue crack propagation under constant amplitude and flight simulation loading, stress corrosion crack initiation and...report 1982
- document
-
't Hart, W.G.J. (author), Schra, L. (author)A comparative experimental investigation was done on the advanced plate alloys 7010-T651 from ALCAN and 7150-T6E189 from ALCOA. The mechanical properties, fracture toughness and corrosion properties were determined. The most notable finding was the excellent fracture toughness of alloy 7150-T6E189 combined with a high tensile strength. The...report 1982
- document
-
Oldersma, A. (author)Composite materials with more than one type of fiber in one matrix are known as hybrid composites. In this work the fatigue behaviour of composite materials is discussed and the behaviour of hybrid composites is related to simple (single-fiber) composites. The properties and the behaviour of hybrid composites can mostly be explained...report 1991
- document
-
Wanhill, R.J.H. (author), Schra, L. (author), 't Hart, W.G.J. (author)This report compares the mechanical properties, fracture toughness and fatigue crack growth properties of the damage tolerant/medium strength aluminium plate alloys 2024-T351, 2324-T39, 8090-T651 and 8090-T8171. The main objective, in view of previous work, was to determine whether damage tolerant 8090-T8171 plate can advantageously replace the...report 1995
- document
-
Neelakantan, S. (author)Titanium alloys possess good corrosion properties, high temperature stability and high strength-to-weight ratio. However, they fall short in providing the optimum strength-ductility relation in the most demanding structural applications, including the aerospace sector. Inspired by the possibility of enhancing the strength-ductility relation in...doctoral thesis 2010
- document
-
Zhao, T. (author), Palardy, G. (author), Villegas, I.F. (author), Rans, C.D. (author), Martinez, M.J. (author), Benedictus, R. (author)The in-plane and out-of-plane mechanical behaviour of both ultrasonically spot-welded and mechanically fastened joints was investigated by double-lap shear and pull-through tests, respectively. Spot-welded specimens showed comparable onset failure load and significantly higher joint stiffness compared to mechanical fasteners when carrying shear...journal article 2016
- document
-
Esposito, R. (author), Anac, C. (author), Hendriks, M.A.N. (author), Copuroglu, Oguzhan (author)The alkali-silica reaction (ASR) is an important problem that has yet to be completely understood. Owing to the complexity of this<br/>phenomenon, a number of studies have been conducted to characterize its kinetics, its impact on the material, and its structural consequences.<br/>This paper focuses on the deteriorating impact of ASR on concrete...journal article 2016
- document
-
Esposito, R. (author)The assessment of concrete structures affected by alkali-silica reaction (ASR) is a complex problem due to the multiscale nature of this long-term phenomenon. The reaction starts within the concrete constituents with the formation of an expansive alkali-silica gel at reaction products level. Being the expansive gel confined within the concrete...doctoral thesis 2016
- document
-
Esposito, R. (author), Hendriks, M.A.N. (author)The alkali-silica reaction (ASR) in concrete is one of the most harmful deterioration processes, which leads to expansion and cracking of the material. To understand the evolution of ASR in concrete and its deteriorating impact on the material, a multiscale material model, from aggregate to concrete level, is proposed. The concrete, which at...journal article 2016
- document
-
Wang, H. (author), Yang, Jun (author), Liao, Hui (author), Chen, Xianhua (author)Electrically conductive asphalt concrete has the potential to satisfy multifunctional applications. Designing such asphalt concrete needs to balance the electrical and mechanical performance of asphalt concrete. The objective of this study is to design electrically conductive asphalt concrete without compromising on the mechanical properties...journal article 2016
- document
-
Jafari, S. (author), Esposito, R. (author), Rots, J.G. (author)Starting point in this research is to find a quick and non-destructive method to characterize the mechanical properties of existing masonry. Tests on cylindrical cores have been recently introduced as a novel in-situ testing method to identify the properties of existing clay brick masonry. Currently, some researchers reported promising results,...conference paper 2017
- document
-
Naddaf Dezfuli, S. (author), Huan, Z. (author), Mol, J.M.C. (author), Leeflang, M.A. (author), Chang, Jiang (author), Zhou, J. (author)The present research was aimed at developing magnesium-matrix composites that could allow effective control over their physiochemical and mechanical responses when in contact with physiological solutions. A biodegradable, bioactive ceramic - bredigite was chosen as the reinforcing phase in the composites, based on the hypothesis that the...journal article 2017
- document
-
Eftekharimilani, P. (author), van der Aa, EM (author), Hermans, M.J.M. (author), Richardson, I.M. (author)This paper presents the effects of double pulse resistance spot welding (RSW) on the microstructural evolution, elemental distribution and mechanical properties of a 3rd generation 1 GPa advanced high strength steel (AHSS). In order to investigate the effect of double pulsing, the steel was exposed to single and various double pulse RSW...journal article 2017
- document
-
Hedayati, R. (author), Ahmadi, S.M. (author), Lietaert, K. (author), Tümer, N. (author), Li, Y (author), Amin Yavari, S. (author), Zadpoor, A.A. (author)Magnesium and its alloys have the intrinsic capability of degrading over time in vivo without leaving toxic degradation products. They are therefore suitable for use as biodegradable scaffolds that are replaced by the regenerated tissues. One of the main concerns for such applications, particularly in load-bearing areas, is the sufficient...journal article 2018
- document
-
Kulczyk-Malecka, Justyna (author), Zhang, Xun (author), Carr, James (author), Nozahic, Franck (author), Estournès, Claude (author), Monceau, Daniel (author), Carabat, A.L. (author), Sloof, W.G. (author), van der Zwaag, S. (author), Withers, Philip J. (author), Xiao, Ping (author)Yttria – partially stabilised zirconia (YPSZ) MoSi<sub>2</sub> composites have been designed to prolong the lifetime of the matrix by self – healing cracks during thermal cycling. The healing reaction at high temperatures is based on the decomposition of MoSi<sub>2</sub>, leading to a volumetrically expanding reaction product, which seals the...journal article 2018
- document
-
Zhang, Xiang Yu (author), Fang, Gang (author), Xing, Lei Lei (author), Liu, Wei (author), Zhou, J. (author)Functionally graded scaffold (FGS) is designed to mimic the morphology, mechanical and biological properties of natural bone closely. Porosity variation strategy between different regions in FGS plays a crucial role in influencing its mechanical and biological performance. A combination of modeling tool and scripting language can effectively...journal article 2018
- document
-
Najafi, S. (author), Eivani, A. R. (author), Samaee, M. (author), Jafarian, H. R. (author), Zhou, J. (author)The effect of equal channel angular pressing (ECAP) on the microstructure and mechanical properties of AA6063 aluminum alloy was investigated. For this purpose, samples of AA6063 aluminum alloy were deformed up to 10 passes using ECAP and the evolution of microstructure, texture and dislocation density was investigated. It was found that the...journal article 2018
- document
-
Fu, W. (author), van Paassen, M.M. (author), Mulder, Max (author)Wave-variable transformation is a means to maintain stability of haptic teleoperation in the presence of communication time delays. Its drawback is that it affects haptic perception of remote properties and thereby degrades transparency. This paper studies the effect of wave-variable transformation on human haptic perception. Based on a...conference paper 2018