Searched for: +
(1 - 20 of 42)

Pages

document
Liu, Y. (author), Weerts, A.H. (author), Clark, M. (author), Hendricks Franssen, H.J. (author), Kumar, S. (author), Moradkhani, H. (author), Seo, D.J. (author), Schwanenberg, D. (author), Smith, P. (author), Van Dijk, A.I.J.M. (author), Van Velzen, N. (author), He, M. (author), Lee, H. (author), Noh, S.J. (author), Rakovec, O. (author), Restrepo, P. (author)
Data assimilation (DA) holds considerable potential for improving hydrologic predictions as demonstrated in numerous research studies. However, advances in hydrologic DA research have not been adequately or timely implemented in operational forecast systems to improve the skill of forecasts for better informed real-world decision making. This is...
journal article 2012
document
Yin, L.J. (author), Ji, Wei Wei (author), Liu, Shi Yu (author), He, Wei Dong (author), Zhao, Lin (author), Xu, Xin (author), Fabre, A. (author), Dierre, B.F.P.R. (author), Lee, Ming Hsien (author), van Ommen, J.R. (author), Hintzen, H.T.J.M. (author)
Synthesizing pure phase Ba<sub>3</sub>Si<sub>6</sub>O<sub>9</sub>N<sub>4</sub> by the conventional solid-state reaction method is challenging because of easily formed secondary phase Ba<sub>3</sub>Si<sub>6</sub>O<sub>12</sub>N<sub>2</sub> showing similar crystal structure. In this work, an alternative low temperature synthesis method is...
journal article 2016
document
van Oostrum, Matthijs (author), Liu, Jiayao (author), Li, Yishiqin (author), Hoek, Ruben (author), Yang, Yidong (author), He, Zhujun (author), Buysschaert, Axel (author), Xiao, Yazhi (author), Peng, Jiping (author), van Eijk, Saskia (author), Yang, Qiao (author)
This publication is in response to the call of 2017 Bi-City Biennale of Urbanism\Architecture (Shenzhen) (UABB) “Cities, Grow in Difference”, from the perspective of urbanism: the synthesis of factors that collectively determine the spatial use of the city. <br/>This atlas is based on master graduation theses of Delft University of Technology ...
book 2017
document
Qian, Kun (author), Tang, Linkai (author), Wagemaker, M. (author), He, Yan Bing (author), Liu, Dongqing (author), Li, Hai (author), Shi, Ruiying (author), Li, Baohua (author), Kang, Feiyu (author)
Through a facile sodium sulfide (Na<sub>2</sub>S)-assisted hydrothermal treatment, clean and nondefective surfaces are constructed on micrometer-sized Li<sub>4</sub>Ti<sub>5</sub>O<sub>12</sub> particles. The remarkable improvement of surface quality shows a higher first cycle Coulombic efficiency (≈95%), a significantly enhanced cycling...
journal article 2017
document
He, L. (author), de Weerdt, M.M. (author), Yorke-Smith, N. (author), Liu, Xiaolu (author), Chen, Yingwu (author)
Agile Earth observation satellite (AEOS) scheduling is complex, due to long visible time windows and time-dependent transitions between observations. We introduce a generic approach suited for scheduling problems characterised by time-dependency and/or sequence-dependency. Our approach is a novel hybridization of adaptive large neighbourhood...
conference paper 2018
document
Yi, Ran (author), Wu, Chenming (author), Liu, Yong-Jin (author), He, Ying (author), Wang, C.C. (author)
This paper presents a 3-D printing system that uses a low-cost off-the-shelf consumer projector to fabricate large models. Compared with traditional digital light processing (DLP) 3-D printers using a single vertical carriage, the platform of our DLP 3-D printer using delta mechanism can also move horizontally in the plane. We show that this...
journal article 2018
document
Zhou, C. (author), Liu, X. (author), Apostolidis, P. (author), Scarpas, Athanasios (author), He, Liang (author)
Low temperature asphalt (LTA) technologies, such as warm-mixed asphalt mixes, are utilized in the paving industry to lower energy demands and greenhouse gas emissions during asphalt mixing and pavement construction. However, the asphalt mixes developed that incorporate LTA additives are more sensitive than hot-mixed asphalts to temperature...
journal article 2018
document
He, D. (author), Pang, Y. (author), Lodewijks, G. (author), Liu, X. (author)
Belt conveyors play an important role in the dry bulk material handling process. Speed control is a promising method of reducing the power consumption of belt conveyors. However, inappropriate transient operations might cause risks like material spillage away from the belt conveyor. The unexpected risks limit the applicability of speed...
journal article 2018
document
Wang, Sihao (author), He, Jun (author), Liu, Yuqing (author), Li, Chuanxi (author), Xin, H. (author)
Composite girder with corrugated steel web is one of the promising concrete-steel hybrid structures with superior properties and cost effectiveness widely applied in highway and railway bridges. The connection between concrete slabs and corrugated steel web is an important part of such composite structure. In order to improve pouring quality...
journal article 2018
document
Xin, H. (author), Mosallam, Ayman (author), Liu, Yuqing (author), Veljkovic, M. (author), He, Jun (author)
In this paper, analytical and numerical homogenization methods are proposed to effectively simulate the macroscopic characteristics of a pultruded composite lamina. A continuum damage model was implemented via user material subroutine to model fiber failure, while the Mohr-Coulomb plastic criterion is employed to model matrix damage. In order...
journal article 2019
document
Zhang, Youyou (author), Mosallam, Ayman (author), Liu, Yuqing (author), Sun, Yun (author), Xin, H. (author), He, Jun (author)
In this study, flexural behaviors of the pultruded composite laminate were evaluated through experiments and theoretical analysis. Three-point flexural tests were performed for pultruded specimens. The typical failure mode for the longitudinal flexural specimens was local crush on the top surface accompanied with local cracks on the bottom...
journal article 2019
document
Li, Mengxia (author), Mou, Junmin (author), Liu, Rongfang (author), Chen, P. (author), Dong, Zhuojian (author), He, Yixiong (author)
Following the growth in global trade activities, vessel traffic has increased dramatically in some busy waterways and ports. However, such increments have made it more complex to manage the regional vessel traffic, which can increase the risk of an accident in the area. To model and analyze the relationship between vessel traffic and maritime...
journal article 2019
document
Zhang, Youyou (author), Liu, Yuqing (author), Xin, H. (author), He, Jun (author)
Steel-concrete composite high bridge pier has been applied increasingly in China and around the world. Most applied steel type in the composite piers are H-shaped steel and steel pipe, while seldom research or practice is associated with angle steel. This paper conducted parametric study on the composite column with equal-leg angle steel and...
journal article 2019
document
Cheng, Zhu (author), Liu, M. (author), Ganapathy, S. (author), Li, Z. (author), Zhang, Xiaoyu (author), He, Ping (author), Zhou, Haoshen (author), Wagemaker, M. (author), Li, Chau (author)
The influence of space-charge layers on the ionic charge transport over cathode-solid electrolyte interfaces in all-solid-state batteries remains unclear because of the difficulty to unravel it from other contributions to the ion transport over the interfaces. Here, we reveal the effect of the space-charge layers by systematically tuning the...
journal article 2020
document
Xin, H. (author), Mosallam, Ayman (author), Correia, José A.F.O. (author), Liu, Yuqing (author), He, Jun (author), Sun, Yun (author)
Design optimization of fiber-reinforced polymeric (FRP) composite products is essential to facilitate their applications in engineering structures. For bridge structures, the main design optimization goals are the reduction of FRP material consumption and the structure weight, which aim to reduce the initial construction cost and achieve a...
journal article 2020
document
Liu, Zhihui (author), Wang, Li (author), Kong, Fanlei (author), Huang, Xia (author), Tang, Zhi (author), He, Shi (author), Vink, P. (author)
BACKGROUND: Many occupations require workers to stand for prolonged periods, which can cause discomfort, pain and even injures. Some supermarkets in life provide a foot pad for checkout staff to let them stand on it at work, thereby reducing standing fatigue caused by standing for a long time. The inclined platform is the same as the foot pad...
journal article 2021
document
He, Songbo (author), Zuur, Kenny (author), Santosa, Dian Sukmayanda (author), Heeres, Andre (author), Liu, C. (author), Pidko, E.A. (author), Heeres, Hero Jan (author)
The catalytic conversion of pure glycerol to bio-aromatics (bio-BTX) over an un-modified H-ZSM-5 (SiO<sub>2</sub>/Al<sub>2</sub>O<sub>3</sub> molar ratio of 23) via an ex-situ catalytic pyrolysis approach in a continuous tandem-micro reactor at a scale of 1 g glycerol h<sup>−1</sup> was investigated. A BTX peak carbon yield of 28.1 ± 0.2 %...
journal article 2021
document
He, Yingdong (author), Zhou, Yuekuan (author), Wang, Zhe (author), Liu, Jia (author), Liu, Zhengxuan (author), Zhang, Guoqiang (author)
Hydrogen-based (H<sub>2</sub>-based) interactive energy networks for buildings and transportations provide novel solutions for carbon-neutrality transition, regional energy flexibility and independence on fossil fuel consumption, where vehicle fuel cells are key components for H<sub>2</sub>-electricity conversion and clean power supply....
journal article 2021
document
He, Songbo (author), Goldhoorn, Hero Reinder (author), Tegudeer, Zhuorigebatu (author), Chandel, Anshu (author), Heeres, Andre (author), Liu, C. (author), Pidko, E.A. (author), Heeres, Hero Jan (author)
The use of H-ZSM-5 with various binders (Al<sub>2</sub>O<sub>3</sub>, SiO<sub>2</sub>, and kaolinite, 10 wt% on catalyst formulation) for the catalytic conversion of glycerol to bio-based aromatics (GTA) was investigated in a continuous bench-scale unit at a pyrolysis temperature of 450 °C, catalytic upgrading temperature of 500 °C, WHSV of...
journal article 2021
document
Sun, Xiaoliang (author), Zhou, Guanggang (author), Liu, Z. (author), Zhu, Jianwei (author), Guo, Fengzhi (author), Chen, Junqing (author), He, Wenhao (author), Wang, Ning (author), Zhao, Ge (author), Lu, Guiwu (author)
The controllability of mining is a key factor affecting the commercial application of methane hydrates, and the addition of chemical additives can significantly accelerate the mining process. However, the effect of additive concentration on hydrate decomposition is not yet well understood. In this study, we systematically investigate the...
journal article 2021
Searched for: +
(1 - 20 of 42)

Pages