Searched for:
(1 - 20 of 207)

Pages

document
Sun, J. (author), Blom, H.A.P. (author), Ellerbroek, J. (author), Hoekstra, J.M. (author)
This article investigates the estimation of aircraft mass and thrust settings of departing aircraft using a recursive Bayesian method called particle filtering. The method is based on a nonlinear state-space system derived from aircraft point-mass performance models. Using only aircraft surveillance data, flight states such as position,...
journal article 2019
document
Sun, J. (author)
A large number of stakeholders exist in the modern air traffic management ecosystem. Air transportation studies benefit from collaboration and the sharing of knowledge and findings between these different players. However, not all parties have equal access to information. Due to the lack of open-source tools and models, it is not always possible...
doctoral thesis 2019
document
Sun, Chuan (author)
The design of polar expedition cruise ship is not a trivial task to the naval architect due to the complex nature of the ship itself. Concept exploration are hereby required to improve the understanding of the design problem and identify its challenge as well as possible solutions. However, it is always difficult to generate the technically...
master thesis 2019
document
Zhang, H. (author), Liu, Y. (author), Wang, Lingen (author), Sun, Fenglian (author), Fan, Xuejun (author), Zhang, G.Q. (author)
The nanoindentation test was conducted in this paper to investigate the indentation hardness, plasticity and initial creep properties of pressure sintered nanosilver joint at various test temperatures. The effects of strain rate on the indentation hardness were first investigated. Then yield stress of nanosilver sintered joint was studied in...
journal article 2019
document
Wang, X. (author), Sun, S. (author), van Kampen, E. (author), Chu, Q. P. (author)
This paper proposes an Incremental Sliding Mode Control driven by Sliding Mode Disturbance Observers (INDI-SMC/SMDO), with application to a quadrotor fault tolerant control problem. By designing the SMC/SMDO based on the control structure of the sensor-based Incremental Nonlinear Dynamic Inversion (INDI), instead of the model-based Nonlinear...
journal article 2019
document
Gao, Weilun (author), Shao, Dongdong (author), Wang, Zhengbing (author), Nardin, William (author), Rajput, Prateek (author), Yang, W. (author), Sun, Tao (author), Cui, Baoshan (author)
Rivers, regardless of their scales and geographic locations, are characterized with natural and human-induced variability in their discharges. While previous studies have established the effects of both interannual and intra-annual variabilities of unsteady river discharge on delta morphological evolution, the long-term cumulative effects of...
journal article 2019
document
Sun, J. (author), Ellerbroek, J. (author), Hoekstra, J.M. (author)
Open access to flight data from Automatic Dependent Surveillance-Broadcast (ADS-B) has provided researchers with more insights for air traffic management than aircraft tracking alone. With large quantities of trajectory data collected from a wide range of different aircraft types, it is possible to extract accurate aircraft performance...
journal article 2019
document
Konstantelos, Ioannis (author), Sun, Mingyang (author), Tindemans, S.H. (author), Issad, Samir (author), Panciatici, Patrick (author), Strbac, Goran (author)
The increasing uncertainty that surrounds electricity system operation renders security assessment a highly challenging task; the range of possible operating states expands, rendering traditional approaches based on heuristic practices and ad hoc analysis obsolete. In turn, machine learning can be used to construct surrogate models...
journal article 2019
document
Yu, C. (author), Hageman, J.G. (author), Ganapathy, S. (author), van Eijck, L. (author), Zhang, Long (author), Adair, Keegan R. (author), Sun, Xueliang (author), Wagemaker, M. (author)
at room temperature, makes it an attractive candidate electrolyte for the all-solid-state Li-S battery. A simple synthesis route with an easy scale up process is critical for practical applications. In this work, the highest room...
journal article 2019
document
Sun, Y. (author), Riva, R.E.M. (author), Ditmar, P.G. (author), Rietbroek, Roelof (author)
We present a new approach to estimate time variations in J2. Those variations are represented as the sum of contributions from individual sources. This approach uses solely Gravity Recovery And Climate Experiment (GRACE) data and the geoid fingerprints of mass redistributions that take place both at the surface and in the interior of the solid...
journal article 2019
document
Zhang, H. (author), Liu, Y. (author), Wang, Lingen (author), Sun, Fenglian (author), Fan, Jiajie (author), Placette, Mark D. (author), Fan, Xuejun (author), Zhang, G.Q. (author)
Modern power electronics has the increased demands in current density and high-temperature reliability. However, these performance factors are limited due to the die attach materials used to affix power dies microchips to electric circuitry. Although several die attach materials and methods exist, nanosilver sintering technology has received...
journal article 2019
document
Sun, B. (author), Fan, J. (author), Fan, Xuejun (author), Zhang, G.Q. (author), Zhang, Guohao (author)
In this paper, a physics of failure-based prediction method is combined with statistical models to consider the impact of current crowding and current droop effects on the reliability of LED arrays. Electronic-thermal models of LEDs are utilized to obtain the operation conditions under the influences of current crowding and current droop. A...
journal article 2019
document
Zhang, Youyou (author), Mosallam, Ayman (author), Liu, Yuqing (author), Sun, Yun (author), Xin, H. (author), He, Jun (author)
In this study, flexural behaviors of the pultruded composite laminate were evaluated through experiments and theoretical analysis. Three-point flexural tests were performed for pultruded specimens. The typical failure mode for the longitudinal flexural specimens was local crush on the top surface accompanied with local cracks on the bottom...
journal article 2019
document
Liu, Y. (author), Zhang, H. (author), Wang, Lingen (author), Fan, Xuejun (author), Zhang, G.Q. (author), Sun, Fenglian (author)
Purpose: Crack and stress distribution on dies are key issues for the pressure-assisted sintering bonding of power modules. The purpose of this research is to build a relationship among stress distributions, sintering sequences and sintering pressures during the sintering processes. Design/methodology/approach: Three sintering sequences, S(a)...
journal article 2019
document
Yao, Liaojun (author), Cui, Hao (author), Sun, Yi (author), Guo, Licheng (author), Chen, Xiangming (author), Zhao, Meiying (author), Alderliesten, R.C. (author)
The influence of fibre bridging on delamination failure in multidirectional composite laminates with different thickness scales is characterized, and the dependence of fibre bridging significance on laminate thickness as well as loading regime is investigated in this paper. Both quasi-static and fatigue resistance curves (R-curve) are...
journal article 2018
document
Sun, Yubo (author)
It has been reported that due to the rapid urbanization and economic growth the municipal solid waste (MSW) would double in volume from 1.3 billion tons per year (in 2012) annually by the end of 2025, challenging environmental and public health management worldwide. Given that, most of the MSW incineration (MSWI) bottom ash (BA) are disposed in...
master thesis 2018
document
Sun, J. (author), Veefkind, j. Pepijn (author), Van Velthoven, Peter (author), Levelt, Pieternel Felicitas (author)
The absorbing aerosol index (AAI) is a qualitative parameter directly calculated from satellite-measured reflectance. Its sensitivity to absorbing aerosols in combination with a long-term data record since 1978 makes it an important parameter for climate research. In this study, we attempt to quantify aerosol absorption by retrieving the...
journal article 2018
document
Sun, Z. (author), Yi, Junyan (author), Feng, Decheng (author), Kasbergen, C. (author), Scarpas, Athanasios (author), Zhu, Yiming (author)
Bio-oil produced during the production of biodiesel is a burden to the environment. Recycling and utilization of bio-oil as a substitute for pavement bitumen can help to build an environmentally-friendly and clean infrastructure. In this study, the bio-bitumen was prepared by bio-oil based on free radical polymerization. Different kinds of...
journal article 2018
document
Yao, L. (author), Cui, Hao (author), Alderliesten, R.C. (author), Sun, Yi (author), Guo, Licheng (author)
This paper provides an investigation on thickness effects on fibre-bridged fatigue delamination growth (FDG) in composite laminates. A modified Paris relation was employed to interpret experimental fatigue data. The results clearly demonstrated that both thickness and fibre bridging had negligible effects on FDG behaviors. Both energy...
journal article 2018
document
Sun, Yimin (author), Verschuur, D.J. (author)
In this paper, we propose a novel three-dimensional receiver deghosting algorithm that is capable of deghosting both horizontal and slanted streamer data in a theoretically consistent manner. Our algorithm honours wave propagation phenomena in a true three-dimensional sense and frames the three-dimensional receiver deghosting problem as a Lasso...
journal article 2018
Searched for:
(1 - 20 of 207)

Pages