Searched for:
(1 - 20 of 193)

Pages

document
Luijmes, Marijn (author)
The Plofbos has a strong character that is defined by the presence of a young forest that springs from the remains of a decomposing military structure. This new growth is dynamic. It continuously changes the light, smells, sight-lines and experiences throughout the seasons. Together with the diversity of open and enclosed spaces and the sense of...
master thesis 2019
document
Bouwman, Sanne (author)
This thesis report represents the result of a graduation project for the master programme Strategic Product Design at the Delft University of Technology carried out in collaboration with KLM Royal Dutch Airlines. This project aims to find out how to create the desired experience for KLM passengers during undesired disruptions. This problem has...
master thesis 2019
document
van Houten, Irene (author)
Museums are often believed to be aimed at adults, yet museums specifically aimed at children are becoming more common, and most museums attempt to cater not only to adults, but to their younger visitors as well. Museum Prinsenhof Delft is one such museum. This report presents the process of creating a new experience aimed at families, who come...
master thesis 2019
document
Meijer, Marloes (author)
This project has explored how design can be of added value in early phases of innovation in the context of the startup studio We Are Builders. Insights were gathered from multiple sources to analyse the project scope and explore opportunities. The goal of this graduation assignment is to create a method to execute ideation that We Are Builders...
master thesis 2019
document
van Bekkum, Marijn (author)
In this report you will read about the design of the Codex Bonaire, an engine room experience design of the Bonaire. The Bonaire is a steam powered sailing ship being renovated in Den Helder to be a museum. This project is focused on creating an experience in the engine room that visualises the engine room without building it physically. The...
master thesis 2019
document
Conversano, Irene (author)
One in four people in the world will be affected by mental or neurological disorders at some point in their lives (WHO, 2001). Around 450 million people currently suffer from such conditions, placing mental disorders among the leading causes of ill- health and disability worldwide, in particular in low-income countries, where many barriers to...
master thesis 2019
document
Vu Kim, Monika (author)
Increasingly companies are facing tough challenges due to fast paced technological developments, shortening product life cycles and new forms of business models. Therefore innovating is crucial for companies to stay competitive and enter new markets. Large corporations have difficulty in breaking silos and developing breakthrough innovations due...
master thesis 2019
document
Bluemink, Bella (author)
In the Netherlands there is a current tendency of areas with extreme growth as well as areas with extreme shrinkage. Because of the increasing population in cities like The Hague, social problems intensify. Among these problems is the issue of social-spatial inequality. This occurs when the distribution of life chances is dependent on the place...
master thesis 2019
document
Vossen, T.E. (author), Tigelaar, E. H. (author), Henze-Rietveld, I. (author), de Vries, M.J. (author), van Driel, J.A.S. (author)
Technological design is a core activity in Science, Technology, Engineering and Mathematics (STEM) education. During the design process, students often employ research activities to enhance the quality of their design decisions and to rise above a mere trial-and-error approach to designing. There are many functions of research within the...
journal article 2019
document
Langelaar, M. (author)
Purpose: The purpose of this paper is to communicate a method to perform simultaneous topology optimization of component and support structures considering typical metal additive manufacturing (AM) restrictions and post-print machining requirements. Design/methodology/approach: An integrated topology optimization is proposed using two density...
journal article 2019
document
Vossen, T.E. (author), Henze-Rietveld, I. (author), de Vries, M.J. (author), van Driel, J.A.S. (author)
Research and design activities are becoming more important in Science, Technology, Engineering and Mathematics (STEM) and D&T (design and technology) education. Research and design are often taught separately from each other, while in professional STEM practices, many projects are neither ‘research only’ or ‘design only’—they are both. In...
journal article 2019
document
Vijfvinkel, Michaël (author)
This thesis describes the design process of a service/tool for the management and prevention of periprosthetic joint infection (PJI) cases. PJI is a complication that follows total joint replacement and is devastating for the patient. It causes physical and mental strain and the patient's health never returns to close to what it was prior to the...
master thesis 2018
document
Sanders, Timo (author)
This thesis studies the radiation dose deposited on a 6U CubeSat in interplanetary orbit. The European Space Agency’s radiation data tool SPENVIS has been used to determine the proton flux in interplanetary space during a solar particle event which occurs only once every one hundred years. SPENVIS has further been applied to obtain a dose depth...
master thesis 2018
document
Fakhredin, F. (author)
The topic of this thesis is design for recycling (DfR) of electronic products. More than ever before, electronic products are intruding into our everyday life, both in the household and in industry, resulting in increasing numbers of electronic products ending up in waste streams (also known as electronic waste, or e-waste). Electronic products...
doctoral thesis 2018
document
Kamp, Anne (author)
This series – “Speaking – is part of a graduation project for a double degree in Architecture and Science Communication at the Delft University of Technology. The overall aim of this project was to design a form language that can be used in complex problem-solving processes in the field of science communication. The graduation project consists...
master thesis 2018
document
Schetselaar, Sergej (author)
In the past 40 years, an incomprehensible 8,3 billion metric tons of plastic has been produced and is primarily being discarded and incinerated, instead of being recycled. Only 10 per cent of this total amount has been recycled to date, therefore it was decided to focus on recycling of plastic waste to reduce plastic pollution which negatively...
master thesis 2018
document
Sendrowicz, Alexander (author)
During endonasal pituitary surgery - an approach of skull base surgery - long slender instruments are inserted through the nose of the patient, in order to remove a pituitary lesion. One of the instruments which is repeatedly used is the surgical punch, which is able to remove pieces of bone in order to create access to the lesion. The drawback...
master thesis 2018
document
de Jager, Maarten (author)
Vanderlande Industries makes sorting machines for the parcel industry. One of these sorting machines is a sliding shoe sorter; the posisorter. Which ensures a positive, form closed, sorting action. Right now, the posisorter can handle 24.000 parcels per hour and is with that the market leader in high capacity sorting machines.

However,...
master thesis 2018
document
van Oorschot, R. (author)
This thesis takes the perspective that ‘a design approach’ might help to better understand and educate the business proposition development in new high-tech ventures. This has been observed at the faculty of Industrial Design Engineering at the Delft University of Technology, where design students (without an entrepreneurial education) start...
doctoral thesis 2018
document
Murillo Iraola, Ainhoa (author)
The purpose of this thesis project is to design a new concept of sprinting prosthesis to enhance the acceleration phase performance of bilateral transtibial amputees (BTAs) competing in sprinting races. Amputee sprinters are hampered in the acceleration phase of a sprint race by the compliance of their prostheses. Increased contact times, and...
master thesis 2018
Searched for:
(1 - 20 of 193)

Pages