Searched for:
(1 - 20 of 57)

Pages

document
Alderliesten, M. (author), Brakel, M.P. (author), Groot, S.R. (author), Immerzeel, F.J.C. (author), Verboon, T. (author)
Dit rapport beschrijft een onderzoek naar het monitoren van bandenconditie. Dit wordt gedaan door het meten van tenminste de grootheden bandendruk en bandentemperatuur. Daarnaast is kennis over de resterende levensduur van de band gewenst. Hiervoor is de rubberdikte als maatstaf genomen. De rubberdikte vormt de basis van een model dat op basis...
bachelor thesis 2009
document
Alderliesten, David (author), Tilro, Jesse (author), Doolaard, Floris (author), Warnars, Niels (author)
The following report outlines the research, development, and delivery phases of the BEPSys 2.0 application. The application aims to provide central project registration and management for courses at the TU Delft. The request for the development stemmed from Otto Visser, who was the acting coordinator for the Computer Science Final Project Course...
bachelor thesis 2017
document
Alderliesten, R.C. (author)
This book provides an introduction to the discipline of aerospace structures and materials. It is the first book to date that includes all relevant aspects of this discipline within a single monologue. These aspects range from materials, manufacturing and processing techniques, to structures, design principles and structural performance,...
book 2018
document
Yao, L. (author), Alderliesten, R.C. (author), Benedictus, R. (author)
This paper provides a study on mode I fatigue delamination growth in composite laminates using energy principles. Experimental data has been obtained from fatigue tests conducted on Double Cantilever Beam (DCB) specimens at various stress ratios. A concept of fatigue fracture toughness is proposed to interpret the stress ratio effect in crack...
conference paper 2015
document
Mahdavi Shahri, M. (author), Schut, H. (author), Van der Zwaag, S. (author), Alderliesten, R. (author)
Abstract only.
conference paper 2013
document
Amaral, L. (author), Yao, L. (author), Alderliesten, R.C. (author), Benedictus, R. (author)
This work proposes to treat quasi-static mode I delamination growth of CFRP as a low-cycle fatigue process. To this end, mode I quasi-static and fatigue delamination tests were performed. An average physical Strain Energy Release Rate (SERR), derived from an energy balance, is used to characterize the energy released in crack extension. The...
conference paper 2015
document
Ruiz-Ripoll, M.L. (author), Schut, H. (author), Van Dijk, N.H. (author), Alderliesten, R.C. (author), Van der Zwaag, S. (author), Benedictus, R. (author)
We have investigated the evolution of damage during fatigue loading in Al–Cu 2024-T3 alloys using the positron annihilation Doppler Broadening (DB) technique. This technique enables us to monitor in a non destructive way, at the atomic and vacancy level, the formation of deformation defects and their interaction with solute atoms at selected...
conference paper 2011
document
Ruiz-Ripoll, M.L. (author), Schut, H. (author), Benedictus, R. (author), Van der Zwaag, S. (author), Alderliesten, R.C. (author)
conference paper 2011
document
Alderliesten, R.C. (author)
This paper discusses similitude parameters for predicting fatigue damage growth, and demonstrates that proper principles exploiting the strain energy release could have improved our knowledge on fatigue damage growth. The paper demonstrates how the original Stress Intensity Factor concept introduced by Irwin has been introduced inconsistently...
conference paper 2015
document
Pascoe, J.A. (author), Alderliesten, R.C. (author), Benedictus, R. (author)
Measurement of the energy dissipation during fatigue crack growth is used as a technique to gain more insight into the physics of the crack growth process. It is shown that the amount of energy dissipation required per unit of crack growth is determined by Gmax, whereas the total amount of energy available for crack growth in a single cycle is...
conference paper 2016
document
Virgolin, M. (author), Alderliesten, Tanja (author), Bel, Arjan (author), Witteveen, C. (author), Bosman, P.A.N. (author)
The recently introduced Gene-pool Optimal Mixing Evolutionary Algorithm for Genetic Programming (GP-GOMEA) has been shown to find much smaller solutions of equally high quality compared to other state-of-the-art GP approaches. This is an interesting aspect as small solutions better enable human interpretation. In this paper, an adaptation of...
conference paper 2018
document
Alderliesten, J.W.D. (author), Valečkaitė, K. (author), Ziliotto Salamon, N. (author), Balint, J.T. (author), Bidarra, Rafael (author)
Commuters who travel by train often feel annoyed due to misunderstanding the causes of delays in train traffic. They oftentimes are unaware of the necessity of performing maintenance to stations, tracks, and trains. MainTrain is a serious game developed to teach commuters about rail-maintenance while simulating the difficulty of keeping...
conference paper 2019
document
Alderliesten, M. (author)
Mean particle diameters are important for the science of particulate systems. This thesis deals with a definition system for these mean diameters, called Moment-Ratio (M-R) definition system, and provides a general statistical and physical basis. Also, the current DIN/ISO definition system is discussed. Many types of mean diameters defined...
doctoral thesis 2008
document
Alderliesten, R.C. (author)
Fibre Metal Laminate Glare consists of thin aluminium layers bonded together with pre-impregnated glass fibre layers and shows an excellent fatigue crack growth behaviour compared to monolithic aluminium. The fibres are insensitive to the occurring fatigue loads and remain intact while the fatigue cracks occur in the aluminium layers. As a...
doctoral thesis 2005
document
Quan, H. (author), Alderliesten, R.C. (author), Benedictus, R. (author)
Plastic energy dissipation is inevitable during fatigue crack growth. There have been previous attempts reported in literature to correlate the plastic dissipated energy (dW/dN) to fatigue crack growth rate (da/dN). However, at a given dW/dN, the da/dN changes with the ratio of minimum and maximum loads, known as the stress ratio. This paper...
journal article 2018
document
Yao, L. (author), Sun, Y. (author), Zhao, M (author), Alderliesten, R.C. (author), Benedictus, R. (author)
This paper aims to investigate stress ratio effect on fibre bridging significance in mode I fatigue delamination growth of composite materials. Fatigue resistance curves (R-curves) of different stress ratios are determined and compared with the quasi-static R-curve. The fatigue R-curve of a high stress ratio is similar to the quasi-static...
journal article 2017
document
Pascoe, J.A. (author), Alderliesten, R.C. (author), Benedictus, R. (author)
The concept of relating fatigue disbond growth to the strain energy release rate (SERR) is critically examined. It is highlighted that the common practise of using only the maximum SERR or only the SERR range is insufficient to correctly characterize a load cycle. As crack growth requires energy, it is argued that growth should be related to the...
journal article 2014
document
Sadighi, M. (author), Pärnänen, T. (author), Alderliesten, R.C. (author), Sayeaftabi, M. (author), Benedictus, R. (author)
The impact response of fiber metal laminates (FMLs), has been investigated with experiments and numerical simulations, which is reported in this article. Low-velocity impacts were carried out to study the effects of metal type and thickness within FMLs. Glare5-3/2 laminates with two aluminum layer thicknesses and a similar FML containing...
journal article 2012
document
Gransden, D.I. (author), Alderliesten, R.C. (author)
Part of the work of AircraftFire, a project investigating the effects of fire and crash on aircraft survivability, is presented. This work compares the effect of changing the material model from metallic to composite on the impact damage and floor acceleration characteristics. First, the metallic two- and six-frame sections of an A320 are...
journal article 2017
document
Alderliesten, R.C. (author)
This paper proposes a straightforward methodology to generate fatigue delamination curves without the influence of fibre bridging using test data obtained on unidirectional double cantilever beam specimens with fibre bridging.
journal article 2018
Searched for:
(1 - 20 of 57)

Pages