Searched for:
(1 - 20 of 592)

Pages

document
Liu, Faqi (author), Yang, Hua (author), Yan, R. (author), Wang, Wei (author)
The behaviour of square steel tube confined reinforced concrete columns after fire exposure was studied experimentally and numerically in this paper. Eighteen stub columns were first heated following the ISO 834 standard fire including both heating and cooling phases, and were subsequently loaded to failure after cooling to ambient temperature....
journal article 2019
document
Apostolidis, P. (author), Liu, X. (author), Erkens, Sandra (author), Scarpas, Athanasios (author)
In epoxy-bitumen systems, temperature contributes to the development of physiochemical and mechanical characteristics during curing (chemical hardening) and at the long-term service (oxidative aging) of pavement structures. Hardening (i.e., chemical or oxidative controlled) is a complex phenomenon in epoxy-modified binders and the in-depth...
journal article 2019
document
Liu, Yun (author)
Nowadays, fears over rising sea levels due to global warming have prompted many countries with lands below sea level to find solutions to ensure the safety of nation and citizen. Furthermore, the development and utilization of marine resources have always been a topic of interest. Due to these necessities, the concept of flexible floating...
master thesis 2019
document
Zhang, H. (author), Liu, Y. (author), Wang, Lingen (author), Sun, Fenglian (author), Fan, Xuejun (author), Zhang, G.Q. (author)
The nanoindentation test was conducted in this paper to investigate the indentation hardness, plasticity and initial creep properties of pressure sintered nanosilver joint at various test temperatures. The effects of strain rate on the indentation hardness were first investigated. Then yield stress of nanosilver sintered joint was studied in...
journal article 2019
document
Liu, P. (author)
Solid State Lighting (SSL) develops towards small size, high lumen output, high working temperature, and multi-functional applications. These trends are more desirable in miniaturized LED applications such as retrofit G4 LED devices. Retrofit G4 LEDs were chosen in this work as a technical carrier due to the miniaturized size challenge and high...
doctoral thesis 2019
document
Liu, Zheheng (author)
In this thesis, we investigate a sparse basis for ultrasound images, so that we can use sparse regularization in imaging. Actually, there are few previous researches explicitly demonstrating that medical ultrasound images can be sparsified for some dictionary. We consider various orthogonal transforms such as wavelet transforms, cosine...
master thesis 2019
document
Liu, Mengyao (author), Lin, Jintai (author), Folkert Boersma, K. (author), Pinardi, Gaia (author), Wang, Yang (author), Chimot, J.J. (author), Wagner, Thomas (author), Xie, Pinhua (author), Eskes, Henk (author), More Authors (author)
pollution and impact evaluation. For regions with high aerosol loadings, the retrieval accuracy is greatly affected by whether aerosol optical effects are treated implicitly (as additional effective clouds)...
journal article 2019
document
Zhang, Zhixia (author), Zhang, Long (author), Yan, Xinlin (author), Wang, Hongqiang (author), Liu, Yanyan (author), Yu, C. (author), Cao, Xiaoting (author), van Eijck, L. (author), Wen, Bin (author)
Br as solid electrolyte synthesized by a facile solid-state sintering. Different from other O-incorporated sulfides,...
journal article 2019
document
Li, S. (author), Liu, J. (author), Negenborn, R.R. (author)
Over the past two decades, a number of methods have been proposed for solving maritime collision avoidance problems. Most of these works take a single ship's perspective and focus on one-to-one or one-to-many situations. To more complicated many-to-many situations, less attention has been paid. To deal with the many-to-many collision...
journal article 2019
document
Shan, M. (author), Liu, X. (author), Wang, X. (author), Liu, Z. (author), Ganapathy, S. (author), Gascon Sabate, J. (author), Kapteijn, F. (author)
capture. Polybenzimidazole (PBI) is one of the leading membrane materials for this separation. In this study, we present superior novel supported PBI (poly(p-phenylene benzobisimidazole), PBDI)...
journal article 2019
document
Liu, Y. (author), Zhang, H. (author), Wang, Lingen (author), Fan, Xuejun (author), Zhang, G.Q. (author), Sun, Fenglian (author)
Purpose: Crack and stress distribution on dies are key issues for the pressure-assisted sintering bonding of power modules. The purpose of this research is to build a relationship among stress distributions, sintering sequences and sintering pressures during the sintering processes. Design/methodology/approach: Three sintering sequences, S(a)...
journal article 2019
document
Zhang, Youyou (author), Mosallam, Ayman (author), Liu, Yuqing (author), Sun, Yun (author), Xin, H. (author), He, Jun (author)
In this study, flexural behaviors of the pultruded composite laminate were evaluated through experiments and theoretical analysis. Three-point flexural tests were performed for pultruded specimens. The typical failure mode for the longitudinal flexural specimens was local crush on the top surface accompanied with local cracks on the bottom...
journal article 2019
document
Liu, Q. (author), Zhao, M. (author), Mytnyk, S. (author), Klemm, B. (author), Zhang, K. (author), Wang, Y. (author), Yan, Dadong (author), Mendes, E. (author), van Esch, J.H. (author)
Hydrogel microparticles are important in materials engineering, but their applications remain limited owing to the difficulties associated with their manipulation. Herein, we report the self-orientation of crescent-shaped hydrogel microparticles and elucidate its mechanism. Additionally, the microparticles were used, for the first time, as...
journal article 2019
document
Zegard, A. (author), Smal, L. (author), Naus, R. (author), Apostolidis, P. (author), Liu, X. (author), van de Ven, Martin (author), Erkens, Sandra (author), Scarpas, Athanasios (author)
The addition of epoxy modifier in bitumen is a relatively new modification technology (1-4) and the most critical epoxy polymerization-induced changes of the epoxy-bituminous materials are not fully understood. Different phenomena take place when epoxy modifiers are incorporated into bitumen and they are dependent on the material hardening...
conference paper 2019
document
Apostolidis, P. (author), Liu, X. (author), Daniel, Gerald C. (author), Erkens, Sandra (author), Scarpas, Athanasios (author)
The utilisation of synthetic fibres has been reported in the past showing enhancement of fatigue and thermal cracking resistance in asphaltic materials. However, the limited evidences about the benefits of these fibres in asphaltic materials at low material scales have been noticed. Also, the exact reinforcing mechanism of binding system in the...
journal article 2019
document
Apostolidis, P. (author), Daniel, Gerald C. (author), Liu, X. (author), Erkens, Sandra (author), Scarpas, Athanasios (author)
The utilization of synthetic fibers has been reported in the past (1-8) showing enhancement of fatigue and thermal cracking resistance in asphaltic materials. However, the limited evidences about the benefits of these fibres in asphaltic materials at low material scales have been noticed. Also, the exact reinforcing mechanism of binding system...
conference paper 2019
document
Apostolidis, P. (author), Liu, X. (author), Zhang, M (author), van de Ven, Martin (author), Erkens, Sandra (author), Scarpas, Athanasios (author)
The addition of epoxy modifier in bitumen is a relatively new modification technology (1-4) and the most critical epoxy polymerization-induced changes of the epoxy-bituminous materials are not fully understood. Different phenomena take place when epoxy modifiers are incorporated into bitumen and they are dependent on the material hardening...
conference paper 2019
document
Chen, Y. (author), Liu, Yao-Hong (author), Zong, Z. (author), Dijkhuis, Johan (author), Dolmans, Guido (author), Staszewski, R.B. (author), Babaie, M. (author)
In this paper, we propose a method to suppress supply pushing of an LC oscillator such that it may directly operate from a switched-mode dc-dc converter generating fairly large ripples. A ripple replication block (RRB) generates an amplified ripple replica at the gate terminal of the tail current source to stabilize the oscillator's tail...
journal article 2019
document
Jiang, Honglan (author), Liu, Leibo (author), Jonker, P.P. (author), Elliott, Duncan G. (author), Lombardi, Fabrizio (author), Han, Jie (author)
In this paper, a fixed-point finite impulse response adaptive filter is proposed using approximate distributed arithmetic (DA) circuits. In this design, the radix-8 Booth algorithm is used to reduce the number of partial products in the DA architecture, although no multiplication is explicitly performed. In addition, the partial products are...
journal article 2019
document
Liu, K. (author), Ma, M. (author), Wu, Longfei (author), Valenti, M. (author), Cardenas-Morcoso, Drialys (author), Hofmann, Jan P. (author), Bisquert, Juan (author), Gimenez, Sixto (author), Smith, W.A. (author)
was investigated. The uniform planar morphology served as a platform to evaluate the electronic effect isolated from morphological effects while minimizing...
journal article 2019
Searched for:
(1 - 20 of 592)

Pages