Searched for: +
(1 - 20 of 312)

Pages

document
Bos, Daan (author)
Substance use disorders, particularly alcohol use disorder (AUD), are a major global health challenge, significantly impacting morbidity and mortality rates. In the Netherlands, around 20% of the population is affected by excessive alcohol consumption, with a notable treatment gap and disproportionate effects on the elderly. Despite increased...
master thesis 2023
document
Bos, Doortje (author), van den Broek, Maartje (author), De Geus, Lara (author), Wielders, Suus (author)
The water and sanitation sector faces well-documented issues that are challenging to address, leading to the establishment of the Platform of Vocational Excellence (PoVE) Water. This platform brings together five regional Centers of Vocational Excellence (CoVE) Water in Europe and South Africa to ensure high-quality skills and competencies in...
student report 2023
document
Bos, Susanne (author)
The project's purpose was to investigate the development of a medical sharps waste device appropriate for use and manufacture in Nepal. Medical sharps waste management in Nepal is still somewhat dangerous, despite the physical and environmental dangers.<br/><br/>After considering several design directions, it was determined to create a mechanism...
master thesis 2023
document
Bos, Kirsten (author)
Unequal deformation of the soil can cause deformation or damage to buildings, like tilted facades or cracks in walls. This research investigates how deformation of a building can be analyzed using Light Detection And Ranging (LiDAR) data. Cyclomedia captures LiDAR data yearly in the Netherlands making it possible to analyze either one or...
master thesis 2023
document
Bos, Thomas (author)
This thesis serves as an attempt to establish the initial empirical linkage between environmental, social and governance (ESG) factors and startup valuation by venture capitalists. While substantial academic work has addressed the ESG topic and how firms’ ESG characteristics impact their financial performance and valuations, relatively little...
master thesis 2023
document
Keşkekler, A. (author), Bos, V. (author), Aragon, A.M. (author), Steeneken, P.G. (author), Alijani, F. (author)
Mechanical nonlinearities dominate the motion of nanoresonators already at relatively small oscillation amplitudes. Although single and coupled two-degree-of-freedom models have been used to account for experimentally observed nonlinear effects, it is shown that these models quickly deviate from experimental findings when multiple modes...
journal article 2023
document
Venkatraghavan, Vikram (author), Voort, Sebastian R.van der (author), Bos, Daniel (author), Smits, M. (author), Barkhof, Frederik (author), Niessen, W.J. (author), Klein, Stefan (author), Bron, Esther E. (author)
Computer-aided methods have shown added value for diagnosing and predicting brain disorders and can thus support decision making in clinical care and treatment planning. This chapter will provide insight into the type of methods, their working, their input data –such as cognitive tests, imaging, and genetic data– and the types of output they...
book chapter 2023
document
Oikonomidis, Silvestros (author), Ramdin, M. (author), Moultos, O. (author), Bos, Albert (author), Vlugt, T.J.H. (author), Rahbari, A. (author)
Due to the intermittency of renewable energy sources, alkaline water electrolyzers are typically operated at partial load compared to the nominal design value. It is well-known that gas crossover is dominant at low current densities leading to higher anodic hydrogen content and higher cathodic oxygen content in the separator tanks. High...
journal article 2023
document
Cahalane, R.M.E. (author), Akyildiz, A.C. (author), Kavousi, Maryam (author), Vernooij, Meike W. (author), Ikram, M. Kamran (author), Gijsen, F.J.H. (author), Bos, Daniel (author)
Background The purpose of this study was to validate a technique for measuring mean calcium density and to determine associations of cardiovascular risk factors with carotid calcium density. Methods and Results We performed a cross-sectional study in a random sample of 100 stroke-free participants from the population-based Rotterdam Study....
journal article 2023
document
Liang, X. (author), Bos, Cornelis (author), Hermans, M.J.M. (author), Richardson, I.M. (author)
A cellular automata (CA) model has been developed for solidification simulation considering the kinetic undercooling at the interface. The state-of-the-art model incorporates a decentered growth algorithm to suppress the grid anisotropy and a generalized height function method to calculate the curvature accurately. To develop a CA model which...
journal article 2023
document
Garcia Chao, P. (author), Eipe, Jonathan J. (author), Krugla, M. (author), Bos, Cornelis (author), Sietsma, J. (author), Kranendonk, Winfried (author), Offerman, S.E. (author)
In the present study, the nucleation of static recrystallization (SRX) in austenite after hot deformation is experimentally analyzed using a Ni-30 pct Fe model alloy. In agreement with the predictions by current models, nucleation rate exhibits a strong peak, early during SRX. Whereas such an early peak is explained by current models by the...
journal article 2023
document
van Dokkum, J.S. (author), Bos, Cornelis (author), Offerman, S.E. (author), Sietsma, J. (author)
Modelling dislocation glide over the initial part of a stress–strain curve of metals received little attention up to now. However, dislocation glide is essential to ones understanding of the fundamental relationship between inelastic deformation and the evolution of the dislocation network structure. Therefore, we present a model of...
journal article 2023
document
Tyuryukanov, I. (author), Bos, Jorrit A. (author), Meijden, Mart A.M.M.van der (author), Terzija, Vladimir (author), Popov, M. (author)
With the growing number of severe system disturbances and blackouts around the world, controlled system separation is becoming an increasingly important system integrity protection scheme (SIPS) to save the electric power system from a complete or partial disintegration. A successful controlled splitting approach should at least tackle the...
journal article 2023
document
Kavun, Vitalii (author), Uslamin, E. (author), van der Linden, B. (author), Canossa, Stefano (author), Goryachev, A. (author), Bos, Emma E. (author), Garcia Santaclara, J. (author), Smolentsev, Grigory (author), Repo, Eveliina (author), van der Veen, M.A. (author)
Titanium-based metal-organic framework, NH2-MIL-125(Ti), has been widely investigated for photocatalytic applications but has low activity in the hydrogen evolution reaction (HER). In this work, we show a one-step low-cost postmodification of NH2-MIL-125(Ti) via impregnation of Co(NO3)2. The resulting Co@NH2-MIL-125(Ti) with embedded single...
journal article 2023
document
Tziotziou, Aikaterini (author), Hartman, Eline (author), Korteland, Suze Anne (author), van der Lugt, Aad (author), van der Steen, A.F.W. (author), Daemen, Joost (author), Bos, Daniel (author), Wentzel, Jolanda (author), Akyildiz, A.C. (author)
Background and aims: Atherosclerotic plaque onset and progression are known to be affected by local biomechanical factors. While the role of wall shear stress (WSS) has been studied, the impact of another biomechanical factor, namely mechanical wall stress (MWS), remains poorly understood. In this study, we investigated the association of MWS...
journal article 2023
document
van Overmeir, A.L. (author), Šavija, B. (author), Bos, Freek P. (author), Schlangen, E. (author)
Several studies have shown the potential of strain-hardening cementitious composites (SHCC) as a self-reinforcing printable mortar. However, papers published on the development of three-dimensional printable SHCC (3DP-SHCC) often report a discrepancy between the mechanical properties of the cast and printed specimens. This paper evaluates the...
journal article 2023
document
van Overmeir, A.L. (author), Šavija, B. (author), Bos, F. P. (author), Schlangen, E. (author)
With the introduction of 3D concrete printing, research started on how to include reinforcement in 3D printed structures. Initial studies on the implementation of strain hardening cementitious composites (SHCC) as self-reinforcing printable mortars have shown promising results. The development of this new type of SHCC comes with additional...
journal article 2023
document
Slooter, R.J. (author), Sluiter, M.H.F. (author), Kranendonk, W. G.T. (author), Bos, C. (author)
In this study possible routes from dissolved M and C atoms to a M-C (M = Ti, Nb) cluster are studied. Using atomistic modelling to perform relaxation simulations and molecular dynamics (MD) simulations for the Fe-M-C ternary system, the formation of clusters is studied for M. Additionally the stability of M-C clusters is assessed. The...
journal article 2023
document
Bos, Joris (author)
Electroactive polymers (EAPs) are smart materials that have electromechanical and mechanoelectrical transduction properties. They are flexible, lightweight, easy to shape and cheap to produce. These properties allow EAPs to be used as actuators or sensors in applications such as soft robotics, metamaterial structures, or other future...
master thesis 2022
document
Bos, R.W. (author)
The energy transition requires the maritime industry to shift to a different fuel. A long term solution is liquefied hydrogen, but there are many challenges to get there. On the short term liquefied natural gas (LNG) might be the most feasible option, because its use relies mostly on existing technologies. It is however not straightforward to...
doctoral thesis 2022
Searched for: +
(1 - 20 of 312)

Pages