Searched for: +
(1 - 20 of 20)
document
Gao, Ziyao (author), Zhao, C. (author), Zhou, Kai (author), Wu, Junru (author), Tian, Yao (author), Deng, Xianming (author), Zhang, Lihan (author), Lin, Kui (author), Wagemaker, M. (author)
Nickel-rich layered oxide cathodes promise ultrahigh energy density but is plagued by the mechanical failure of the secondary particle upon (de)lithiation. Existing approaches for alleviating the structural degradation could retard pulverization, yet fail to tune the stress distribution and root out the formation of cracks. Herein, we report...
journal article 2024
document
Wu, B. (author), Lewis, R.W. (author), Li, G. (author), Gao, Yifan (author), Fan, B. (author), Klemm, B. (author), Huang, J. (author), Wang, Junyou (author), Cohen Stuart, Martien A. (author), Eelkema, R. (author)
In the quest for stimuli-responsive materials with specific, controllable functions, coacervate hydrogels have become a promising candidate, featuring sensitive responsiveness to environmental signals enabling control over sol-gel transitions. However, conventional coacervation-based materials are regulated by relatively non-specific signals,...
journal article 2023
document
Liu, Huanhuan (author), Wang, R. (author), Gao, Haiyan (author), Chen, Lijuan (author), Li, Xiaochen (author), Yu, Xuan (author), Wu, Yaping (author), Bai, Yan (author), Wei, W. (author), Wang, Meiyun (author)
The development of clinical imaging techniques significantly improves diagnostic accuracy and provides guidance for personalized treatment of individuals. However, every single imaging modality has its distinct drawbacks that cannot fully fulfil the diagnosis requirement. Thus, rational combination of different imaging modalities can achieve...
review 2023
document
Shi, Baocun (author), Liu, Quan (author), Gao, Y. (author), Wu, Jiantao (author), Chen, Jingya (author)
The occurrence of cohesive/adhesive hybrid failure at the bitumen-aggregate interface is widely acknowledged, however, the quantitative evaluation of the cohesion/adhesion proportion is relatively weak. This study explored cohesive/adhesive hybrid failure and provided a quantitative analysis of the proportion between cohesion and adhesion....
journal article 2023
document
Zou, Yingxue (author), Xu, Haiqin (author), Xu, S. (author), Chen, Anqi (author), Wu, Shaopeng (author), Amirkhanian, Serji (author), Wan, Pei (author), Gao, Xiang (author)
Moisture erosion is one of the key factors leading to asphalt pavement damage, and the erosion depth indicates the moisture damage level but it is usually neglected. In order to study the moisture erosion and the erosion depth, this study characterized the chemical structure, rheological property and adhesion property of asphalt at different...
journal article 2023
document
Wu, Jiantao (author), Wang, Haoan (author), Liu, Quan (author), Gao, Y. (author), Liu, Shengjie (author)
Owing to the continuous increase of traffic loads, bitumen modification has been manifested as an efficient methodology to enhance asphaltic pavement performance. Currently, the modification index, defined as the ratio of mechanical properties (e.g., complex modulus) before and after bitumen modification, is extensively adopted to evaluate the...
journal article 2022
document
Wang, Junpeng (author), Neuhauser, Christoph (author), Wu, J. (author), Gao, Xifeng (author), Westermann, RĂ¼diger (author)
In this paper, we present novel algorithms for visualizing the three mutually orthogonal principal stress directions in 3D solids under load and we discuss the efficient integration of these algorithms into the 3D Trajectory-based Stress Visualizer (3D-TSV), a visual analysis tool for the exploration of the principal stress directions of 3D...
journal article 2022
document
Xu, J. (author), Soeiro, Thiago B. (author), Wu, Y. (author), Gao, Fei (author), Wang, Y. (author), Tang, Houjun (author), Bauer, P. (author)
A three-phase buck-type rectifier features a step-down ac-dc conversion function, which is considered as a prominent solution for electric vehicle chargers and telecommunication systems integrated to the grid above 380 V line to line. However, traditional solutions for those applications employ cascaded architectures with an ac-dc boost-type...
journal article 2022
document
Zou, Yingxue (author), Pang, Ling (author), Xu, S. (author), Wu, Shaopeng (author), Yuan, Miao (author), Amirkhanian, Serji (author), Xu, Haiqin (author), Lv, Yang (author), Gao, Xiang (author)
During the service period, asphalt materials are affected by various natural factors, including heat, ultraviolet light, oxygen and moisture, etc., resulting in the reduction of pavement performance, the increase of pavement distress and shortening of service life. This study aims to investigate the aging performance of asphalt under multiple...
journal article 2022
document
Yi, Jinming (author), Feng, Jianlin (author), Li, Yuanyuan (author), Bai, Tao (author), Chen, Anqi (author), Gao, Y. (author), Wu, Fan (author), Wu, Shaopeng (author), Liu, Quantao (author), Li, Chuangmin (author)
To meet the needs of the road industry for maintenance operations, a new cement emulsified bitumen mixture (CEBM) with early-strength, self-compacting, and room-temperature construction characteristics was designed. The strength formation mechanism of CEBM was revealed with a scanning electron microscope (SEM) and the surface free energy (SFE...
journal article 2022
document
Wang, Fu (author), Zhu, Hongbin (author), Shu, Benan (author), Li, Yuanyuan (author), Gu, Dengjun (author), Gao, Y. (author), Chen, Anqi (author), Feng, Jianlin (author), Wu, Shaopeng (author)
Traditional asphalt mixtures can't absorb microwave energy efficiently, which limits the development of microwave heating technology in the field of road maintenance. Based on the microwave heating characteristics of basalt aggregates, the overall microwave self-healing rate of the asphalt mixture can be enhanced. The basalt was tested by XRF,...
journal article 2022
document
Ge, Wei (author), Jiao, Yutie (author), Wu, Meimei (author), Li, Zongkun (author), Wang, Te (author), Li, Wei (author), Zhang, Yadong (author), Gao, Weixing (author), van Gelder, P.H.A.J.M. (author)
Dam breaches often have catastrophic consequences in downstream areas. Hydrodynamic factors and the evacuation potential of the population at risk (PAR) have significant impacts on the loss of life (LOL) caused by dam breaches. However, the existing comprehensive evaluation models have not conducted in-depth research on the evacuation...
journal article 2022
document
Wang, Fu (author), Zhu, Hongbin (author), Li, Yuanyuan (author), Gu, Dengjun (author), Gao, Y. (author), Feng, Jianlin (author), Shu, Benan (author), Li, Chao (author), Wu, Shaopeng (author)
Conventional asphalt mixture has poor microwave absorbing performance and microwave heating efficiency. Based on the characteristics of dielectric loss of scrap tire pyrolysis carbon black (PCB), it is proposed to improve the microwave absorbing performance and self-healing rate of bitumen. The phase composition and electromagnetic parameters...
journal article 2022
document
Li, Yuanyuan (author), Li, Jun (author), Li, Chao (author), Chen, Anqi (author), Bai, Tao (author), Tang, Shimin (author), Wu, Shaopeng (author), Gao, Y. (author), Zhu, Hongbin (author), Feng, Jianlin (author)
A self-compacting steel slag epoxy resin concrete (SERC) was designed with steel slag as aggregate and epoxy resin as binder for rapid repair of road expansion joints and pavement. At the same time, a group of self-compacting basalt epoxy resin concrete (BERC) with basalt as coarse aggregate and limestone as fine aggregate was set up as the...
journal article 2022
document
Wu, J. (author), Wang, W. (author), Gao, Xifeng (author)
Inspired by natural cellular materials such as trabecular bone, lattice structures have been developed as a new type of lightweight material. In this paper we present a novel method to design lattice structures that conform with both the principal stress directions and the boundary of the optimized shape. Our method consists of two major...
journal article 2021
document
Gao, Yisong (author), Wu, Lifang (author), Yan, Dong Ming (author), Nan, L. (author)
In 3D printing, it is critical to use as few as possible supporting materials for efficiency and material saving. Multiple model decomposition methods and multi-DOF (degrees of freedom) 3D printers have been developed to address this issue. However, most systems utilize model decomposition and multi-DOF independently. Only a few existing...
journal article 2019
document
Xie, Dongfeng (author), Pan, Cunhong (author), Wu, Xiuguang (author), Gao, Shu (author), Wang, Zhengbing (author)
We investigate the morphological responses of the Hangzhou Bay, China, located immediately south of the Changjiang Estuary, to the drastic reduction of the sediment load from the Changjiang River and the large-scale coastal embankment schemes over past decades. The spatial patterns of deposition and erosion, sediment volume changes, and the...
journal article 2017
document
Xie, DF (author), Pan, CH (author), Wu, Xiuguang (author), Gao, S (author), Wang, Zhengbing (author)
The research objective is to investigate the variations of sediment transport in outer Changjiang Estuary and adjacent Hangzhou Bay, induced by the decline of Changjiang River sediment discharge and massive land reclamation in the last three decades. A synchronous hydrographic survey was conducted along two transects (at the bay-mouth and outer...
journal article 2017
document
Xie, Dongfeng (author), Gao, Shu (author), Wang, Zhengbing (author), Pan, Cunhong (author), Wu, Xiuguang (author), Wang, Qiushun (author)
We investigate the evolution of a large-scale sand body, a unique type of sandbars in a convergent estuary. Specifically, we analyze and simulate the sand deposition system (defined as an inside bar) in the Qiantang Estuary (QE) in China. The deposit is 130 km long and up to 10 m thick, and is characterized by a dextral morphology in the lower...
journal article 2017
document
Liu, Yang (author), Wu, Yuanhao (author), Bian, Dong (author), Gao, Shuang (author), Leeflang, M.A. (author), Guo, Hui (author), Zheng, Yufeng (author), Zhou, J. (author)
Novel Mg-(3.5, 6.5wt%)Li-(0.5, 2, 4wt%)Zn ternary alloys were developed as new kinds of biodegradable metallic materials with potential for stent application. Their mechanical properties, degradation behavior, cytocompatibility and hemocompatibility were studied. These potential biomaterials showed higher ultimate tensile strength than...
journal article 2017
Searched for: +
(1 - 20 of 20)