- document
-
Ye, Shaoxiong (author), Feng, Pan (author), Liu, Yao (author), Liu, Jiaping (author)The nanoscale dissolution flux of tricalcium aluminate (C3A) in flowing water is characterized in situ by Digital Holographic Microscopy (DHM). The pure dissolution of C3A in flowing water with a flow rate of 34 ml·min-1 before the precipitation of hydrated phases only lasted about one quarter of a second, and the pure dissolution rate mostly...conference paper 2021
- document
-
Chen, J. (author), Liu, Xian (author), Ye, G. (author)Microcracks play vital roles in the prediction of the service life of concrete structure. Because microcracks in concrete structure are the preferential ingression channels for aggressive ions, e.g., chloride, sulphate, etc. However, microcracks have potentials to self-heal autogenously due to the continuous hydration of unhydrated cement,...conference paper 2016
- document
- Aldin, Zainab (author), Nedeljković, Marija (author), Lukovic, M. (author), Liu, Jiahua (author), Blom, Kees (author), Ye, G. (author) conference paper 2017
- document
-
Liu, Hao (author), Ye, Hanting (author), Yang, J. (author), Wang, Q. (author)Motivated by the trend of realizing full screens on devices such as smartphones, in this work we propose through-screen sensing with visible light for the application of fingertip air-writing. The system can recognize handwritten digits with under-screen photodiodes as the receiver. The key idea is to recognize the weak light reflected by the...conference paper 2021
- document
-
Hong, H. (author), Ye, Li (author), Li, Ke (author), Sarro, Pasqualina M (author), Zhang, Kouchi (author), Liu, Zewen (author)In this paper, we report a modified three step anisotropic wet etching (TSWE) method to fabricate solid-state silicon nanoslits. The slit-opening process is performed by <111> crystal plane etching. The etching rate of the <111> crystal plane is reasonably slow as it is only 1/45 of the <100> etching rate, thus allowing and...conference paper 2021
- document
-
Tan, C. (author), Wang, S. (author), Liu, X. (author), Jiang, Jing (author), Zhang, Kouchi (author), Ye, H. (author)On the basis of the development and application requirements of flexible DC transmission techniques, a 1 kA/10 kV half-bridge IGBT press-pack module is studied. The module is composed of three subunits in series, and each subunit consists of IGBT chips in parallel. In order to solve the problem of chips failure caused by non-uniform rigid...conference paper 2022
- document
-
Li, Shizhen (author), Liu, X. (author), Jiang, Jing (author), Tan, C. (author), Gao, Chenshan (author), Liu, Yang (author), Ye, H. (author), Zhang, Kouchi (author)Cu-Ag core-shell (CS) nanoparticle (NP) is considered as a cost-effective alternative material to nano silver sintering material in die attachment application. To further reduce the cost, the thickness of the Ag shell can be adjusted. Whereas the shell thickness will also affect the thermal stability of the Cu-Ag CSNPs. In this study, molecular...conference paper 2022
- document
-
Liu, Ke (author), Yuan, Wucheng (author), Wang, S. (author), Tan, C. (author), Ye, H. (author)In this paper, a novel bubble-shift super junction (SJ) MOSFET structure is proposed, and its main static electrical parameters and reverse recovery characteristics are simulated by TCAD software tool. By designing the P-pillar ion implantation windows with a certain offset, the bubble-shift SJ-MOSFET contains a curved pillar region in the upper...conference paper 2022
- document
-
Yuan, Wucheng (author), Liu, Ke (author), Wang, S. (author), Tan, C. (author), Ye, H. (author)The limitation of Silicon based power MOSFET was broken by the super-junction (SJ) structure, which can provide lower specific on-resistance and higher breakdown voltage compared with the conventional power MOSFET structure. Multi-epitaxial and multi-ion-implant technology, as a mature manufacturing process of the SJ structure, has been widely...conference paper 2022
- document
-
Li, Shizhen (author), Liu, X. (author), Fan, Jiajie (author), Tan, C. (author), Wang, S. (author), Xie, Bin (author), Ye, H. (author)The wide-bandgap semiconductors represented by GaN have a broad application prospect because of their high service temperature and high switch frequency. Quad-Flat-No-Lead (QFN) Package is currently one of the mainstream packaging methods due to its low cost and high efficiency. However, the low reliability of QFN used in GaN devices is still...conference paper 2022
- document
-
Liu, Dong (author), Hasanov, Urfan (author), Ye, Changqing (author), Gou, Xiaofan (author), Wang, X. (author)Compared with partially superconducting generators, fully superconducting generators (F-SCGs) can further increase the torque density in large direct-drive wind turbine applications. Design trends of F-SCGs intend to increase the electrical loading by applying superconducting wires and boost the current density in the armature winding to meet...conference paper 2020
- document
- Ye, G. (author), Liu, X. (author), Poppe, A.M. (author), De Schutter, G. (author), Van Breugel, K. (author) journal article 2007
- document
-
Tan, C. (author), Zhou, Quan (author), Liu, X. (author), Zhang, Kouchi (author), Ye, H. (author), Wu, Qibao (author)Combining the first principles calculations and the non-equilibrium Green’s function formalisms, we decipher the structural, electronic, and transport properties of boron phosphide (BP) with hydrogenation. Hydrogenated BP monolayer is an indirect semiconductor with a wide-bandgap of 3.76 eV that is favorable in power devices. We find that the...journal article 2022
- document
-
Short-circuit characteristics of superconducting permanent magnet generators for 10 MW wind turbinesLiu, Dong (author), Song, Xiaowei (author), Wang, X. (author), Elhindi, Mohamed (author), Hasanov, Urfan (author), Gou, Xiaofan (author), Ye, Changqing (author)Superconducting permanent magnet generators (SCPMGs) are a potential candidate for 10 MW direct-drive wind turbine applications. This paper presents two 10 MW SCPMG designs using MgB&lt;sub&gt;2&lt;/sub&gt; cables for the armature winding and investigates the short-circuit characteristics of the designed SCPMGs. The first part...journal article 2021
- document
-
Jiang, Jing (author), Wang, S. (author), Liu, X. (author), Liu, Jianhui (author), Li, Jun (author), Zhou, Dexiang (author), Zhang, Kouchi (author), Ye, H. (author), Tan, C. (author)High electric-field stress is an effective solution to the recovery of irradiated devices. In this paper, the dependence of the recovery level on the magnitude of gate voltage and duration is investigated. Compared with the scheme of high gate-bias voltage with a short stress time, the transfer characteristics are significantly recovered by...journal article 2022
- document
-
Liu, X. (author), Li, Shizhen (author), Tan, C. (author), Gao, Chenshan (author), Liu, Yang (author), Ye, H. (author), Zhang, Kouchi (author)Nano copper sintering technology has great potential to be widely applied in the wide-bandgap semiconductor packaging. In order to investigate the coalescence kinetics of copper nano particles for this application, a molecular dynamic (MD) simulation was carried out at low temperature on a special model containing two substrate and multiple...journal article 2022
- document
-
Li, Shizhen (author), Liu, Yang (author), Ye, H. (author), Liu, X. (author), Sun, Fenglian (author), Fan, Xuejun (author), Zhang, Kouchi (author)This paper studied the behaviors of sintering between Ag nanoparticle (NP) and nanoflake (NF) in the same size by molecular dynamics simulation. Before the sintering simulation, the melting simulation of NF was carried out to calculate the melting points of NFs and investigate the thermostability of NF. The Lindemann index and potential...journal article 2022
- document
-
Chen, Jing (author), Liu, X. (author), Zeng, Xiao Liang (author), Ye, Huai Yu (author), Zhang, Kouchi (author)Hexagonal boron nitride (BN) is often used as filler to improve the thermal conductivity of polymer matrix due to its high thermal conductivity. However, previously reported BN-based composites always have a high in-plane thermal conductivity, which is not beneficial for vertical heat dissipation. In addition, high BN content results in the...journal article 2022
- document
-
Li, Z. (author), Liang, X. (author), Liu, C. (author), Liang, M. (author), van Breugel, K. (author), Ye, G. (author)This study investigates the deformation of free and stress of restrained alkali-activated slag concrete (AASC), respectively, under semi-adiabatic condition. The concrete shows first thermal expansion, which is compensated soon by autogenous shrinkage. The subsequent cooling down of the concrete aggravates shrinkage and development of tensile...journal article 2022
- document
-
Tan, C. (author), Wang, S. (author), Yang, Huiru (author), Huang, Qianming (author), Li, Shizhen (author), Liu, X. (author), Ye, H. (author), Zhang, Kouchi (author)Short-wave ultraviolet (also called UVC) irradiation is a well-adopted method of viral inactivation due to its ability to damage genetic material. A fundamental problem with the UVC inactivation method is that its mechanism of action on viruses is still unknown at the molecular level. To address this problem, herein we investigate the...journal article 2023