Searched for:
(1 - 20 of 242)

Pages

document
Zhao, Yuan (author), Alderliesten, R.C. (author), Wu, Zengwen (author), Zhou, Zhengong (author), Fang, Guodong (author), Zhang, Jiazhen (author), Benedictus, R. (author)
Finite-width-correction factors (FWCF) are required for GLARE to accurately predict fatigue crack growth using linear elastic fracture mechanics. As demonstrated in earlier work, these factors effectively correct for the change in specimen compliance, which in GLARE relates to intact fibre layers and the formation of delaminations between...
journal article 2019
document
Zhou, Wenjun (author)
The aim of this project was to build a pleasant customer experience of personalizing, virtual fitting and ordering made-to-measure knitwear, so as to improve their satisfaction on fit as well as reduce waste in the fashion industry.
The project started with a deep dive into the design context. Relevant knowledge from academic and industry...
master thesis 2019
document
Zhou, YiLong (author)
Carrier selective passivating contact (CSC) is considered to be a promising direction for surface passivation research because it performs passivation for both non-contacted and contacted areas. Conventional heavy doping CSCs are subject to a few drawbacks such as significant Auger recombination, parasitic absorption, complicated processing and...
master thesis 2019
document
Eivani, A. R. (author), Vafaeenezhad, H. (author), Nikan, O. (author), Zhou, J. (author)
and a...
journal article 2019
document
Zhou, F. (author), Hu, Xiangyun (author), Giannakis, Iraklis (author), Giannopoulos, Antonios (author), Holliger, Klaus (author), Slob, E.C. (author)
poster 2019
document
Zhou, Y. (author), Daamen, W. (author), Vellinga, T. (author), Hoogendoorn, S.P. (author)
The importance of maritime transport keeps increasing with the trade globalization. With the growing demand for waterborne transport, vessel traffic flows are also expected to increase. This paper reviews maritime traffic models from the vessel behavior modeling perspective. The maritime traffic models include the models for vessel traffic both...
review 2019
document
Zhou, K. (author), Lindenbergh, R.C. (author), Gorte, Ben (author)
Up-to-date 3D city models are needed for many applications. Very-high-resolution (VHR) images with rich geometric and spectral information and a high update rate are increasingly applied for the purpose of updating 3D models. Shadow detection is the primary step for image interpretation, as shadow causes radiometric distortions. In addition,...
journal article 2019
document
Zhou, Y. (author), Daamen, W. (author), Vellinga, T. (author), Hoogendoorn, S.P. (author)
Since the introduction of the Automatic Identification System (AIS), AIS data has proven to be a valuable source of ship behavior analysis using data mining. It records ship position, speed and other behavior attributes at specific time intervals in all voyages at sea and in ports. However, the current studies in ship behavior analyze the...
journal article 2019
document
Bai, Sheng Wen (author), Fang, Gang (author), Zhou, J. (author)
The present study was aimed at determining the extrudability of a newly developed Mg-Al-Zn-RE magnesium alloy with large amounts of alloying elements. The experimental and numerical investigation clearly showed that the extrudate temperature was a crucial factor in deciding if a critical temperature between 754 K and 768 K (481 °C and 495 °C)...
journal article 2019
document
Tao, Jianfeng (author), Wang, Zhengbing (author), Zhou, Zeng (author), Xu, Fan (author), Zhang, Changkuan (author), Stive, M.J.F. (author)
The radial sand ridges (denoted as “RSRs” hereafter) in the Southern Yellow Sea, China, are morphologically striking because of the remarkable size and radial planar orientation, standing out as a unique coastal geomorphology among the worldwide sand ridge systems. The formation of this giant fan‐shaped geomorphic feature requires delicate...
journal article 2019
document
Ozgun, H. (author), Ersahin, M.E. (author), Zhou, Z. (author), Tao, Y. (author), Spanjers, H. (author), van Lier, J.B. (author)
This study provides a comparison of the sludge characteristics along the height of an upflow anaerobic sludge blanket (UASB) reactor in terms of sludge morphology, activity and stability. The main aim of this study was to identify the best location (i.e. where sludge is of lowest stability and/or highest concentration) in the sludge bed for...
journal article 2019
document
Ou, Yiyi (author), Zhou, Weijie (author), Hou, Dejian (author), Brik, Mikhail G. (author), Dorenbos, P. (author), Huang, Yan (author), Liang, Hongbin (author)
phosphors were investigated in detail. The Rietveld refinement and DFT calculation reveal the...
journal article 2019
document
Qu, Bingyan (author), Zhou, Rulong (author), Wang, L. (author), Dorenbos, P. (author)
level locations of the TM...
journal article 2019
document
Zhou, K. (author), Chen, Y. (author), Smal, I.V. (author), Lindenbergh, R.C. (author)
Up-to-date 3D building models are important for many applications. Airborne very high resolution (VHR) images often acquired annually give an opportunity to create an up-to-date 3D model. Building segmentation is often the first and utmost step. Convolutional neural networks (CNNs) draw lots of attention in interpreting VHR images as they can...
journal article 2019
document
Ao, Y. (author), Wang, J. (author), Zhou, M. (author), Lindenbergh, R.C. (author), Yang, M. Y. (author)
Panoramic images are widely used in many scenes, especially in virtual reality and street view capture. However, they are new for street furniture identification which is usually based on mobile laser scanning point cloud data or conventional 2D images. This study proposes to perform semantic segmentation on panoramic images and transformed...
journal article 2019
document
Bai, Sheng Wen (author), Fang, Gang (author), Zhou, J. (author)
Solid-state bonding takes place during the extrusion process to produce a hollow metal profile through a porthole die, known as extrusion welding. Defective weld seams degrade extruded products in mechanical properties. The present research was aimed to determine the effect of extrusion condition on the longitudinal weld seam quality of a...
journal article 2019
document
Li, Y. (author), Lietaert, Karel (author), Li, W. (author), Zhang, X.Y. (author), Leeflang, M.A. (author), Zhou, J. (author), Zadpoor, A.A. (author)
The corrosion fatigue behavior of additively manufactured topologically ordered porous iron based on diamond unit cells was studied for the first time to understand its response to cyclic loading in a simulated physiological environment. The material exhibited high fatigue resistance with fatigue strengths being 70% and 65% of yield stress in...
journal article 2019
document
Zhou, Jianchao (author), Laumann, S.J. (author), Heimovaara, T.J. (author)
Using naturally occurring processes to modify the engineering properties of the subsurface has received increasing attention from industry and research communities as they aid in the development of cost-effective, robust and sustainable engineering technologies. In line with this trend, we propose to use precipitates of aluminum (Al) and organic...
journal article 2019
document
Zhao, Y. (author), Alderliesten, R.C. (author), Zhou, Zhengong (author), Fang, Guodong (author), Zhang, Jiazhen (author), Benedictus, R. (author)
In general, a finite width correction to stress intensity factor (SIF) is required in the fatigue crack growth. The finite width correction factor can be explained physically from the energy point of view. It is assumed that the finite width correction factor primarily constitutes an energy correction factor, i.e. it corrects the applied load...
journal article 2018
document
Zhou, Yanxin (author)
Finite element analysis is becoming a popular tool for engineers recently. Nonlinear finite element analysis is more advanced due to that it can deal with the nonlinearity of structures, which leads to more accurate approximation of structural behaviour. In Model Code 2010, nonlinear finite element analysis, which belongs to the higher level of...
master thesis 2018
Searched for:
(1 - 20 of 242)

Pages