Searched for:
(1 - 20 of 113,127)

Pages

document
Ritsma, Folkert (author)
Performance of set based fault detection is highly dependent on the complexity of the set bounding methods used to bound the healthy residual set. Existing methods achieve robust performance with complex set bounding that narrowly define healthy system behavior, yet at the cost of higher computation times. In this thesis a major improvement is...
master thesis 2019
document
Zhao, Dong (author), Lenz, Thomas (author), Gelinck, Gerwin H. (author), Groen, W.A. (author), Damjanovic, Dragan (author), de Leeuw, D.M. (author), Katsouras, Ilias (author)
Depolarization in ferroelectric materials has been studied since the 1970s, albeit quasi-statically. The dynamics are described by the empirical Merz law, which gives the polarization switching time as a function of electric field, normalized to the so-called activation field. The Merz law has been used for decades; its origin as domain-wall...
journal article 2019
document
Zuiderwijk-van Eijk, AMG (author), Spiers, Helen (author)
Open data sharing and re-use is currently more common in some academic disciplines than others. Although each discipline has unique challenges and characteristics which can influence data sharing and re-use behavior, it may be possible to gain transferable insight from disciplines where these practices are more common. Several studies of the...
journal article 2019
document
Bechtle, Philip (author), Schelbergen, M. (author), Schmehl, R. (author), Zillmann, Udo (author), Watson, S.J. (author)
We compare the available wind resources for conventional wind turbines and for airborne wind energy systems. Accessing higher altitudes and continuously adjusting the harvesting operation to the wind resource substantially increases the potential energy yield. The study is based on the ERA5 reanalysis data which covers a period of 7 years...
journal article 2019
document
Viegas Ochôa De Carvalho, Pedro (author), Fernandez Villegas, I. (author), Groves, R.M. (author), Benedictus, R. (author)
This article presents research about the propagation of ultrasonic guided waves in ultrasonically welded thermoplastic composite joints. The goal of the study was to understand the effect of weld manufacturing defects on guided wave transmission across the joint. Triangular energy-directors integrated into the lower composite adherends...
journal article 2019
document
Zhao, Yuan (author), Alderliesten, R.C. (author), Wu, Zengwen (author), Zhou, Zhengong (author), Fang, Guodong (author), Zhang, Jiazhen (author), Benedictus, R. (author)
Finite-width-correction factors (FWCF) are required for GLARE to accurately predict fatigue crack growth using linear elastic fracture mechanics. As demonstrated in earlier work, these factors effectively correct for the change in specimen compliance, which in GLARE relates to intact fibre layers and the formation of delaminations between...
journal article 2019
document
De Meer Pardo, Fernando (author)
The scarcity of historical financial data has been a huge hindrance for the development algorithmic trading models ever since the first models were devised. Most financial models assume as hypothesis a series of characteristics regarding the nature of financial time series and seek extracting information about the state of the market through...
master thesis 2019
document
Kraan, Oscar (author), Kramer, Gert Jan (author), Nikolic, I. (author), Chappin, E.J.L. (author), Koning, Vinzenz (author)
Full decarbonisation of the electricity system is one of the key elements to limit global warming. As this transition takes place, the electricity system must maintain system adequacy and remain affordable to consumers. In liberalised electricity markets investors are seen as key actors driving this transition. Due to the intermittent...
journal article 2019
document
Sun, J. (author), Blom, H.A.P. (author), Ellerbroek, J. (author), Hoekstra, J.M. (author)
This article investigates the estimation of aircraft mass and thrust settings of departing aircraft using a recursive Bayesian method called particle filtering. The method is based on a nonlinear state-space system derived from aircraft point-mass performance models. Using only aircraft surveillance data, flight states such as position,...
journal article 2019
document
Dhanisetty, V.S.V. (author)
There is a growth in the use of composites for the new generation of wide-body aircraft such as the Boeing 787 and Airbus A350. This shift from using aluminium as the primary material is motivated by the benefits of using composites in design, manufacturing and operations. Composites offer the aircraft manufacturer the ability to create more...
doctoral thesis 2019
document
Papadopoulos, N. (author)
This thesis presents an experimental work on electronic transport in two-dimensional (2D) van der Waals systems. The variety of the physics of the chapters reflects the exploratory character of the Ph.D. study and demonstrates the versatility and the unique properties of some of the members of the vast group of van der Waals materials. In the...
doctoral thesis 2019
document
de Vries, Jannelie (author)
Interobserver reliability is a problem in behavioural studies. In order to increase the interobserver reliability, a formal checker is used to study behaviour. Together with a clear ethogram of basic behaviours, this tool can be used to automatically check for more complex behaviours and thus reducing the risk of biases introduced by human...
master thesis 2019
document
Ronchini Ximenes, A. (author)
Constant increase in data processing efficiency has enabled, among many other things, the intensive use of depth mapping technologies. Consumer applications, such as gaming, augmented and virtual realities (AR/VR), and other human-machine interfaces, are typically based on intensive image processing, either by triangulation and/or structured...
doctoral thesis 2019
document
Gaio, N. (author)
The cost and the development time of pharamecutical products are often severely affected by the in vitro tests currently employed in pharmaceutical R&D. These assays are often failing to accurately recapitulate diseases and to predict human responses to new medicines. Organ-on-Chip (OOC) devices are designed to result in advanced in vitro...
doctoral thesis 2019
document
Mout, B.M. (author)
To predict the quality of an optical system we need to simulate the effects of aberrations and diffraction. Aberrations can be calculated by tracing rays from a source point through a digital model of the system and evaluating the spot size of these rays on the detector. For a system without aberrations, the rays will intersect at a single point...
doctoral thesis 2019
document
Giammarino, Vittorio (author)
This thesis provides a theoretical framework for the arise of stop-and-go waves in platoons of Human-driven Vehicles (HVs) on a ring road topology. Possibilities and limitations for traffic control and suppression of such waves via a single Autonomous Vehicle (AV) are considered. Being HVs prone to show string instability, i.e. a type of...
master thesis 2019
document
Roy, A. (author)
The analytical expressions for the ultimate load bearing capacity of the RC structures do not provide the generalized notion of ultimate load bearing capacity, which can be obtained through nonlinear finite element analysis (NLFEA). In order to obtain an accurate estimate of failure probability of a RC structure it is necessary to use NLFEA...
doctoral thesis 2019
document
Bouquet, G.C. (author)
For the dimensioning of concrete structures it is customary to determine the forces and stresses occurring in construction elements on the basis of the prescribed loads. In an iterative process, the final dimensions of the elements and reinforcement are then determined. This process becomes less simple if not only the external loads, but also...
doctoral thesis 2019
document
Kruisdijk, Wies (author)
The goal of this report is to study the way in which female university students (aged 18 to 25) deal with their moods during their menstruation, and to use this information to design a product to help them deal with their negative moods in a healthy way, by using resilience-focused mood-regulation strategies. Literature research and the field...
master thesis 2019
document
Krijgsman, Laurens (author)
The technology used in health care is one of the fastest developing fields in Precision Engineering. The main focus in this field is on the development of steerable, small dimensioned instruments. Using these, surgeries can be done with minimal damage to the patient, shorter hospital stay and more aesthetical healing.
From the medical field...
master thesis 2019
Searched for:
(1 - 20 of 113,127)

Pages