Searched for:
(1 - 20 of 26,680)

Pages

document
Volger, Casper (author)
The growth of the cruise industry throughout recent years and the changing public opinion on cruise ships has led to increasing concerns regarding the impact cruise vessels have on the world’s climate and environ- ment. Cruise passengers prefer not to be related with heavy polluting vessels. In fact, trends like responsible tourism and...
master thesis 2019
document
Ritsma, Folkert (author)
Performance of set based fault detection is highly dependent on the complexity of the set bounding methods used to bound the healthy residual set. Existing methods achieve robust performance with complex set bounding that narrowly define healthy system behavior, yet at the cost of higher computation times. In this thesis a major improvement is...
master thesis 2019
document
van Terwisga, Wouter (author)
Automated shipping is a technology which is highly anticipated by many actors in the inland shipping sector. Rijkswaterstaat, as the manager of the main inland waterways in the Netherlands, wants to be prepared for this technology. As the technology is still very immature, this research has attempted to reduce the amount of uncertainty in the...
master thesis 2019
document
Span, Karel (author)
Jumbo Maritime is a shipping company active in the heavy lifting market. Jumbo uses stabilisers to enlarge the stability of the ship during lifting. By using stabilisers Jumbo can perform heavy lifts with a relative small ship, this is one of the major advantages. Downside of using stabilisers is that the installation and de-installation is a...
master thesis 2019
document
Ubbens, Otmar (author)
With the rapid development of Quantum Computers (QC) and QC Simulators, there will be an increased demand for functioning Quantum Algorithms in the near future. Some of the most ubiquitously useful algorithms are solvers for linear systems of equations. Since the conception of the Quantum Linear Solver Algorithm (QLSA) by Harrow, Hassidim and...
bachelor thesis 2019
document
Wagemaker, Bas (author)
In Chapter 1, the focus is on the classification of force generators, which is the family of mechanisms to which balancers belong to. The goal of this chapter is to introduce a bottom-up classification method to identify the complete solutions space of transmissions in force generators based on their transfer function. Using this method, spring...
master thesis 2019
document
Sousa Vicente, Frederico (author)
Multi-step optimization of large composite structures involves formulating the stiffness distribution in terms of lamination parameters that provide a continuous design space, followed by a second optimization in the discrete design space to obtain equivalent stacking sequences. The retrieval of stacking sequences is often challenging as a...
master thesis 2019
document
Heemels, Alex (author)
This thesis discusses developments towards a low-cost Fourier Ptychographic microscope for label free imaging of malaria parasites.
A review of the morphology and life cycle of malaria and the main diagnostic methods for its detection is followed by an introduction to Fourier Ptychography with emphasis on the underlying imaging principles...
master thesis 2019
document
Ni, Xianhao (author)
Our research focuses on speech detection from body movements using wearable accelerometer data collected in an in-the-wild mingling event. We aim to explore the nature of the connection between speech and body movements. More specifically, we stress on the person-specificity of speech. Many studies have shown that speech always comes along with...
master thesis 2019
document
Leijenhorst, Nando (author)
Quantum error correction is needed for future quantum computers. Classical error correcting codes are not suitable for this due to the nature of quantum mechanics. Therefore, new codes need to be developed. A promising candidate is the toric code, a surface code, because of its locality and its high error correcting capability and thresholds ...
bachelor thesis 2019
document
Dijkhuizen, Joël (author)
The inertial parameters of a vehicle, which include the mass, centre of gravity position and the moments of inertia, influences the dynamics of the vehicle. Currently, the modelling of the vehicle is done by assuming fixed, conservative, values for the inertial parameters. Knowing the exact values may increase the performance, safety and comfort...
master thesis 2019
document
de Lange, Danny (author)
PURPOSE. The purpose of this thesis is to investigate the possibility of implementing a prototype of a steerable needle in a medical procedure. Therefore the two main research questions are: “Can the intended user perform a steering motion with the steerable needle and reach the target area following a straight and curved trajectory?” and “Does...
master thesis 2019
document
Meijssen, Aart (author)
Vehicle-to-grid (V2G) could turn an electric vehicle (EV) into a potential source of flexibility, in order to deal with the variability and uncertainty in electricity supply brought about by renewable energy sources and the load increase caused by the adoption of EVs. However, only a few studies have focussed on the complexity of EV drivers’...
master thesis 2019
document
Sedee, Ivo (author)
Monitoring organisations are currently in a transition phase towards risk-based inspections using data models and algorithms in order to increase their efficiency and transparancy. The use of data by monitoring organisations has several benefits, but can at the same time have negative effects in the medium- to long-term. This study explores...
master thesis 2019
document
de Kok, Mendel (author)
This thesis report describes the process and the result of a graduation project for the master programme Integrated Product Design at the Delft University of Technology. The project is carried out in collaboration with Marktplaats, a classified advertising service. This project aims to improve amateur product presentation on Marktplaats.
master thesis 2019
document
Bhoraskar, Akshay (author)
This study aims at a possible solution to predict the fuel consumption of heavy duty diesel trucks, particularly, the tractor semitrailer for their long haul operations using various machine learning techniques. It intends to provide a possible alternative to simulation or physics based models, which often are very complicated. The stringent...
master thesis 2019
document
Sriram, Karthick (author)
Zero Emission Fuels (ZEF B.V.) is a start-up working to build a sustainable methanol micro-plant. Carbon dioxide and water are obtained from atmosphere. Hydrogen is obtained from captured water through alkaline electrolysis and the hydrogen is used for methanol production. The alkaline electrolyser should run at 50 bar and 90°C with 30% KOH as...
master thesis 2019
document
Heitzig, Dorian (author)
This study investigates the wing deformation of the flapping-wing micro air vehicle (MAV) DelFly II in various flight configurations. Experiments were carried out with the MAV tethered in a windtunnel test section. To determine the best suited measurement approach, a trade-off study was carried out which showed that a point tracking approach...
master thesis 2019
document
Freiherr von der Goltz, Julian (author)
Aircraft inspections after unexpected incidents, like lightning strikes, currently require a timeconsuming and costly inspection process, due to the small size of the lightning strike damages. Mainblades Inspections is working on an automated, drone-based solution, that scans the aircraft hull with a high-resolution camera. The objective of this...
master thesis 2019
document
Srivastava, Shivam (author)
This thesis aims to manage information exchange at the case company by designing an information exchange map using a business process model for the customer-to-customer process, together with structuring team meetings and creating ground rules for efficient information exchange.

The Damper Division of ZF Friedrichshafen AG (case...
master thesis 2019
Searched for:
(1 - 20 of 26,680)

Pages