- document
-
Bakker, Ilse (author)Kitepower is a start up that generates energy using kites. The Kitepower system consists of airborne components, and a ground station where a drum is connected to a generator/electrical motor. For generating energy a so called pumping cycle is performed. In a pumping cycle energy is generated during the traction phase when the kite pulls the...bachelor thesis 2018
- document
-
Engelen, Max (author), van den Heuvel, Philip (author)In the REstore Voiding Urinary rEtention (REValUE) project, a high frequency stimulator is designed that should be able to determine the optimal parameters to block the urethral sphincter. In this report the design of the control, interface, current source and electrode switching circuit of the device is explained – the other parts are explained...bachelor thesis 2018
- document
-
van Schagen, Maarten (author), Brodskaya, Yana (author)This thesis focuses on finding a control algorithm that, based on a list of requirements, is most suitable for driving the 25 A permanent magnet synchronous motor and propeller that are provided by Fusion Engineering. Various control algorithms are investigated, and basic implementations are simulated. Based on the investigation, it was decided...bachelor thesis 2023
- document
-
Van Baar, I.J. (author), El Bakkali, Z. (author), Van Dalfsen, J.J. (author), Van der Schrier, E.D. (author), Vogelzang, L.G.J. (author)In the history of the World Solar Challenge, a six day challenge from Darwin to Adelaide, one car has proved to be dominating: the Nuon Solar Car. A telemetry application played an important role in this, but needed to be updated. This was realised by the new Mission Control application project: "Building a GUI for Nuna's Mission Control". In...bachelor thesis 2014
- document
-
Prahladsingh, S.V. (author), Rutten, D. (author)This thesis will describe our research and process during the Bachelor project "Wireless control of LED lighting system using Bluetooth and Android". Our team was a 4 man team, where we, the authors, worked on the Android app development, the PCB design and the Power Supply. For work done on an FPGA and the flexible LEDs, see thesis written by P...bachelor thesis 2014
- document
-
Cromjongh, Casper (author), Rietveld, Jasper (author)This BSc Thesis is about the construction and control elements of the airplane group of the Solar Drone project. The project aims to improve the flight time of aerial vehicles, using solar energy. This document is delves into the possibility of applying solar cells to small model aircrafts. It outlines the challenges and solutions involved in...bachelor thesis 2019
- document
-
Van Santvliet, Pieter (author), Rozendaal, Aart (author)This thesis shows the detailed design of the control and software of a DC microgrid of a tiny house community on the roof of a high-rise building in the city of Rotterdam in the Netherlands, consisting of twelve tiny houses powered by solar and wind energy. This thesis is part of a project with two other subgroups, focusing on the microgrid...bachelor thesis 2021
- document
-
Lodder, Niels (author)With increased developments and interest in platooning and higher levels of automation (SAE level 3+), the need for safety systems that are capable of monitoring system health and maintain safe operation in faulty scenarios is increasing. Methods for the detection, isolation and identification of faults in automated and cooperative driving is...master thesis 2021
- document
-
Voglitsis, D. (author)The utilization of IPT technology in electric vehicles (EVs) charging applications and in the microgrid restoration/islanding mode, has the potential to bring about a change in how EVs are perceived today. Firstly in consumer level, by making the charging process more convenient, safe and user-friendly, by removing the messy cords , and secondly...master thesis 2014
- document
-
Vicente Melo E Carvalho Marques, Mariana (author)L1 adaptive control is a relatively new technique that attempts to tackle the robustness shortcoming of the MRAC controller by applying a low pass filter to the control input. It can be used as an augmentation loop using baseline controllers such as backstepping or PID. This controller has been implemented as an augmentation loop with both these...master thesis 2017
- document
-
Fernandez Barrio, Jorge (author)A proportionate controller is investigated experimentally for unsteady load alleviation purposes on a 2D wing model with a trailing edge flap. This study is supposed to be a simplified version of a Smart Rotor, a mechanism which deals with the reduction of unsteady loads acting on a wind turbine and aims to understand the behavior of this type...master thesis 2020
- document
-
Van der Sluijs, I.L. (author)This thesis concerns the design and construction of an automatic drilling fluid measurement setup and the use of such setup to control the drilling fluid pH. The construction of the experimental setup include modifications to the acquired rheometer to obtain reliable batch rheology measurements within the typical viscosity range of a shear...master thesis 2012
- document
-
van der Spaa, Linda (author)Current robots consume a lot of energy. The work required for a task is generally just a tiny fraction of the total energy consumed. Most energy wastefully dissipated. Design of the 2 degree of freedom (DoF) Plugless Robot Arm shows that clever design can reduce these energy losses to a tiny remaining fraction. The Plugless Arm is designed to...master thesis 2017
- document
-
Budhysutanto, W.N. (author)Philips Applied Technologies has developed the RT-Motion USB platform as a compact distributed real-time motion control platform, but the platform can still be improved by developing a more advanced software framework. The goal of this thesis project is to design a modular software framework to complement the RT-Motion USB platform with...master thesis 2009
- document
-
Triepels, Joris (author)Ship to shore (STS) cranes handle millions of containers every day. One of the latest products from Stinis is the Split-Headblock. This device allows its user to work in tandem operation in which up to two 20ft or four 40ft containers can be lifted at once. In order to further increase the performance, it is important that it can be accurately...master thesis 2018
- document
-
Cheung, S. (author)The project was on expanding the service of Greetinq's voicemail product. The product allowed users to set multiple welcome messages for their callers. In this project, voicemail, its use and applications for this product have been explored. The end result is a service which allows users to control their availability better through the use of...master thesis 2009
- document
-
Prinsen, Jop (author)Wind farm control is an area of research that looks to maximise the performance of individual but most importantly the collective performance of wind farms. The performance of turbines located in a wind farm is heavily dependent on the effects of turbine wakes, and improving the efficiency of wind farms by mitigating the wake effects is an...master thesis 2023
- document
-
Drenth, J.F.T. (author)Graduation project on the Public Realm. Topic of study is how to restructure the city of Rotterdam to increase its legibility. Furthermore the design focuses on creating an a-typical typical plan. A plan that can be repeated, thus inheriting the qualities of Typical Plan -flexibility and legibility, without giving in to the worst threat of...master thesis 2014
- document
-
Tsolakis, Anastasios (author)Nonholonomic mechanical systems encompass a large class of practically interesting robotic structures, such as wheeled mobile robots, space manipulators, and multi-fingered robot hands. However, few results exist on the cooperative control of such systems in a generic, distributed approach. In this work we extend a recently developed distributed...master thesis 2021
- document
-
Clarke, M.A.H. (author)The problem of testing the performance of an attitude control system presents new challenges and opportunities when conducted on a CubeSat scale. This is the result of drastic reduction in physical properties (size, mass, torques) as well as project resources (funds, manpower, time) when compared to traditional satellite programs. This thesis...master thesis 2016