Searched for:
(1 - 20 of 52)

Pages

document
Korthals, M. (author)
Enviu is a young foundation that scouts and develops WOW! projects. These WOW! Projects are sustainable projects that have the objective to become an independent businesses on the long term. This graudation project has the objective to develop a new WOW! Project concept for Enviu utilizing 3D printing. The advantages of 3D printing are combined...
master thesis 2011
document
Van den Hout, J. (author)
master thesis 2011
document
Van den Eerenbeemt, P. (author)
This graduation project is based on an active role of the consumer to be able to design, produce and use his/her own sustainable product. It combines Personal Fabrication and Co-creation with Sustainability in a product proposal for the company Enviu - Innovators in Sustainability. The three pillars of this project have been explored in the...
master thesis 2011
document
Van den Hurk, T.G.J. (author)
This Master thesis describes the creation of Bebé: a design of an incentive for pregnant couples to live and eat healthy. This project was commissioned by the department of Obstetrics and Gynaecology of the Erasmus Medical Centre (MC) in Rotterdam, and executed as the final project of the Master Integrated Product Design at the Delft University...
master thesis 2014
document
Bodea, I.S. (author)
CityPortUnit is an investigation into why and how architectural programs are created. Can our cities be seen as entities in synchrony, as nodes of decentralised networks and if so, how does this impact their response to changes in neighbouring or distant nodes? The project and research try to answer these question by proposing a link to...
master thesis 2014
document
Leon Loreto, P. (author)
The goal is to develop a 3D printed wrist orthesis to replace the traditional plaster type and increases wearing comfort for the patients. It should be a class 1 category medical tool, with limited restrictions. The design should be clean, easy to fit and remove, light, and solid. The result should be a reflection of a clear understanding of 3D...
master thesis 2014
document
Van Toor, J.A. (author)
Modern Computer Aided Design/Engineering can assist in the design of highly optimized engineering structures. Such structures allow for a significant reduction on the strain of resources across the product life cycle, where the potential for weight reduction is most beneficial for the aerospace industry. However, their production is currently...
master thesis 2014
document
Van der Linden, L.P.L. (author)
Additive manufacturing is a production technique that builds up successive layers of material to create a 3D object from a digital model. With additive manufacturing design freedom is offered, which enables new opportunities for structural engineers and designers. This new opportunity is applied to design and produce structural joints for...
master thesis 2015
document
Joosten, S.K. (author)
The potential of additive manufacturing is great: highly complex and efficient structures can be manufactured with hardly any waste material. While high-tech industries such as aviation and medicine have already embraced additive manufacturing, civil engineering is lagging behind. Research on the structural properties of additive manufactures in...
master thesis 2015
document
Willemsen, D.R.S. (author)
Currently 75% of children with a visual impairment attend regular schools. Schools are digitizing, which poses both advantages as well as threads to the education of students who are blind. With help of VoiceOver or refreshable braille displays, digital textual information has become accessible to the student, however, there is no solution...
master thesis 2015
document
Karagianni, L.K. (author)
The demand of customized solutions to product design and to the building sector, has become more and more evident during the last years. Researchers and architects are experimenting the potential of new technologies of digital fabrication, like Additive Manufacturing in order to facilitate the process of customized products. This project is...
master thesis 2015
document
Kalgreadis, A. (author)
Magnetic levitation actuation has proven to be a viable solution in many applications where high performance actuators are needed that can achieve fine manipulation and position control. Advantages of magnetic levitation include elimination of friction, backlash, vibrations and wear of components due to contact. Many such systems have been...
master thesis 2015
document
Chang, C. (author)
This project focused on an analysis of the unmet needs of 3D printing shop owners, as well as the needs and concerns of the end customers in a 3DP e-commerce context. The goal of the product is to create a design solution for fostering a 3D printing marketplace business for project client - Triple 3D. The report explains the research analysis,...
master thesis 2015
document
Ma, J. (author)
Three dimensional printing (3D Printing) is an additive manufacturing method. The current applications of 3D printing are rapid prototyping and rapid manufacturing. As a new technology, it shows a promising opportunity to balance the conflict between rebellion and conformism, a basic principle in play. However there is a knowledge gap when it...
master thesis 2016
document
Kroon, M.E.N. (author)
Natural reefs are important habitats for a wide range of species. Furthermore, they attenuate waves and thereby protect the leeside, functioning as coastal protection. Many reefs are however eroding or degraded, leading to a loss of these ecosystem services. Artificial reefs can reverse this negative trend. The artificial reefs in this context...
master thesis 2016
document
Bijadi, S. (author)
This report discusses the project in 3 main parts: Part 1 discussed the initial detailed analysis and synthesis of 3D printing and Prosthetics, and subsequent definition of a design goal. In Part 2, the conceptual design, and prototyping and development of a new prosthetic hand platform along with multi-material functionality enhancements on the...
master thesis 2016
document
Rossing, L. (author)
Ultimaker produces desktop Fused Deposit Modelling (FDM) 3D printers. One downfall of the FDM technology is that it is relatively slow in producing solid parts, compared to other rapid prototyping techniques. Larger volumes increase the printing time exponentially. This project started off with a unique idea to replace the internal volume with a...
master thesis 2016
document
Botterman, B. (author)
Although Full Color (FC) High Definition (HD) Additive Manufacturing (AM) machines are available on the market today, a FC HD Fused Filament Fabrication (FFF) printer has yet to enter the competitive FFF market. Leapfrog, a FFF printer manufacturer, holds a patent that allows the application of coating on 3D printed FFF filament after it has...
master thesis 2016
document
Heij, W.J. (author)
Additive manufacturing (AM) is a manufacturing method with two distinct advantages over traditional subtractive methods. First, it allows for much higher form freedom, allowing for shapes that are unobtainable by conventional techniques. Second, this method is also referred to 'rapid prototyping' given the fact that objects, and mainly prototype...
master thesis 2016
document
van der Zalm, M. (author)
Additive manufacturing, colloquially known as 3D printing, is a production process that offers possibilities compared to conventional production methods. Current methods involve shaping or removing of material to create parts, where additive manufacturing adds material. Several industries have successfully implemented the technology showing...
master thesis 2016
Searched for:
(1 - 20 of 52)

Pages