Searched for: +
(1 - 20 of 58)

Pages

document
de Zoeten, Godert (author)
The world’s ever-increasing demand for energy and the inevitable depletion of the available fossil resources in the foreseeable future lead to an increasing necessity to optimize the exploitation of oil fields. The in-line liquid-liquid swirl separator is a separation method that is interesting for two reasons: It separates oil and water faster...
bachelor thesis 2018
document
Bakker, Ilse (author)
Kitepower is a start up that generates energy using kites. The Kitepower system consists of airborne components, and a ground station where a drum is connected to a generator/electrical motor. For generating energy a so called pumping cycle is performed. In a pumping cycle energy is generated during the traction phase when the kite pulls the...
bachelor thesis 2018
document
Swart, Céline (author)
The transverse flute can be studied on many aspects. In this thesis the sound waves that can be generated inside the flute are studied on their shape and frequencies. To achieve this, two mathematical models of the sound waves inside a flute are developed. To develop these models, solutions to the second dimensional wave equation are calculated...
bachelor thesis 2022
document
Neijenhuis, R.W.A. (author)
Ieder jaar zijn er veel evenementen waar duizenden of zelfs miljoenen mensen op afkomen. Denk bijvoorbeeld aan muziek-, cultuur- en sportevenementen. Daarnaast gebruiken miljoenen mensen dagelijks plekken als stations of winkelcentra. Bij al deze voorbeelden ontstaan gigantische mensenmassa's die gecontroleerd moeten worden zodat de...
bachelor thesis 2015
document
van der Zalm, Joost (author)
The goal of the research described in this thesis was to investigate the basis of dissipation dilution as well as make it comprehensible. In the written literature we could find that the kinetic energy of an oscillating beam is stored into two types of potential energy~\cite{Kippenberg, Kotthaus}. A dissipative bending component and a...
bachelor thesis 2019
document
Van Dijk, M.T.P. (author)
A mathematical model of the migration and deformation of cells on a cellular scale is simulated. The cells are represented by a boundary and a nucleus. The boundary and nucleus are divided into several points, where the boundary points as well as the nucleus points are connected to each other by a series of springs. The model considers one or...
bachelor thesis 2015
document
Van Nee, M.M. (author)
In dit verslag wordt een wiskundig model voor tumorangiogenese gepresenteerd. Daarnaast wordt een model voor de zuurstofconcentratie en een model voor de tumorgrootte gepresenteerd. De angiogenese wordt op microschaal gemodelleerd door de verplaatsing van de toppen van bloedvaten per tijdsstap te berekenen. De verplaatsing wordt bepaald door...
bachelor thesis 2014
document
Roseboom, J. (author)
Tijdens het varen zijn er verschillende data gemeten. In deze data zitten fouten. Vanwege de fouten zijn er aannames opgesteld. De aannames worden getoetst. De data wordt gecorrigeerd, gebruikmakend van gewogen gemiddelden en kubische splines
bachelor thesis 2015
document
Markensteijn, G.C. (author)
This thesis is about the beginning of a global tide model in DFlow-FM, a project by Deltares. The first focus lay on finding the best grid that can be used for this model. We tried to grids, a rotated lat-lon grid and a squarely grid with local refinement. After calculating the RMS-value it was found that the local refined grid gave the best...
bachelor thesis 2014
document
Mastouri, M. (author), Rimon, F.G.N. (author)
bachelor thesis 2020
document
Boon, W.M. (author)
bachelor thesis 2011
document
Nieuwenhuis, M.T.A. (author)
During gas production offshore, also water is produced. There are gas numbers available per well, but the water production is only known for several wells together. This thesis tries to model the water production per well based on the available data. This is done through a least-squares method. The report shows that it is very difficult to find...
master thesis 2014
document
Kuijk, D. (author)
The urban area is complex. It consists of buildings, roads, green areas and surface water. The subsurface is just as complex. Interaction between groundwater and drainage, seepage from deeper groundwater aquifers and interaction with surface water make it difficult to determine what is happening. The urban area is also sensitive to damages, both...
master thesis 2015
document
Noordhoek Hegt, Floris (author)
Many regions in the world depend heavily on expensive desalinated water for fresh water consumption, in particular tropical areas. Current mainstream desalination technologies (Reverse Osmosis and Multi-Stage Flash Evaporation) are quite energy intensive and thus costly. Today’s challenge is to design a desalination system that could run with...
master thesis 2017
document
Van Lelyveld, W. (author)
Global turmoil concerning fossil fuels, questions relating to sustainable sources of energy and difficulties with sharing knowledge led to the creation of the Energy Transition Model (ETM) in the start of 2008. The ETM aims to be a transparent, comprehensive, fact-based, and independent model about energy related matters, ranging from CO2...
master thesis 2010
document
Taverne, P. (author)
This thesis presents a case study in modeling and verifying a POSIX-like file store for Flash memory. This work fits in the context of Hoare’s verification challenge and, in particular, Joshi and Holzmann’s mini-challenge to build a verifiable file store. I have designed a simple file store and implemented it in the form of a Promela model. This...
master thesis 2009
document
Schoenmaker, Lars (author)
In this thesis diffuser performance will be simulated with computational fluid dynamics, which will be done with the program Ansys Fluent. The expanding geometry creates an adverse pressure gradient and under certain conditions there will also be separation.<br/><br/>At first a relative simple simulation will be done of a one-directional...
master thesis 2017
document
Borst, J. (author)
This study presents a consistent anatomical dataset, containing the musculoskeletal geometry (muscle attachment sites, fibre length, tendon length, bony landmarks) and muscle contraction parameters (physiological cross sectional area, optimal fibre length) of the complete neck musculature. A dissection experiment was performed on the left side...
master thesis 2009
document
van der Pluijm, Ricardo (author)
The Flying V is an innovative new aircraft concept currently being developed by the faculty of Aerospace Engineering at Delft University of Technology. This aircraft is a flying wing having a large sweep on the inner section, and a small sweep angle at the outer, giving the aircraft its characteristic V shape. The objective of this research is...
master thesis 2021
document
Oud, M. (author)
Models are an important tool for decision making. However, in order to get proper results, these models must be validated and only be used in situations where the conditions of the validation apply. Blind trust on a model can lead to unexpected and inaccurate results. Advancements can be made to reduce the number of situations where this occurs....
master thesis 2016
Searched for: +
(1 - 20 of 58)

Pages