Searched for: +
(1 - 20 of 96)

Pages

document
van Lith, Niels (author)
The development of neural prostheses, especially those directly targeting the brain, requires extensive research and modelling before clinical trials can be performed. Currently, the resolution of artificial vision is not sufficient for everyday tasks. By studying the expected spatial extent of stimulation, we aim to provide insights to...
master thesis 2024
document
Romijn, Kasja (author)
Over the past few decades, the Netherlands has built numerous steel railway bridges to improve its infrastructure. The repeated loading from railway traffic makes steel bridges susceptible to fatigue damage. The stress ranges at fatigue-prone locations are generally higher in railway bridges than in road traffic bridges. Due to the limited space...
master thesis 2023
document
Pouchias, Konstantinos (author)
Lugs are a specific type of joint with a semi-circular geometry around the pinhole utilized in the aerospace field. Its distinct geometry and ability to carry loads in its plane make it a very common choice for design engineers. Although this type of joint is widely used, there are no analytical equations that can predict the stresses around the...
master thesis 2023
document
Teeuwen, Eduard (author)
It is becoming increasingly clear that the effects of climate change should be decreased or even mitigated. Green alternative sources of energy are being explored, and wind energy emerges as an important option that can be exploited on a large scale. Wind turbines are placed more and more often offshore due to larger and more stable wind...
master thesis 2023
document
Prabendra Ardhan Atmakusuma, Prabendra Ardhan (author)
The Noordtunnel is an immersed tunnel open to roadway service since 1990 in The Netherlands. Over the past thirty years of its operation time, a significant differential settlement behaviour has been observed, and this ongoing settlement potentially imposes safety concerns to the tunnel, such as joint leakage. However, the underlying factor...
master thesis 2023
document
Korthals Altes, Ruth (author)
The global focus on climate change and the transition away from fossil fuels has highlighted the importance of renewable energy sources. Offshore wind turbines are being optimized and are therefore growing in size and power. <br/><br/>This research focuses on bolted ring-flange connections, a connection type that plays a crucial role in the...
master thesis 2023
document
Slockers, Dennis (author)
This thesis explores a suitable method and appropriate input to determine the failure probability of thermal shrinkage cracking in a steel fibre-reinforced underwater concrete floor by examining the factors that influence this failure probability.<br/><br/>An underwater concrete (UWC) floor is a common construction type in the Netherlands that...
master thesis 2023
document
Stellinga, Coen (author)
To reduce the environmental impact or cost of a civil engineering structure their designs are optimized. A promising method to optimize are iterative optimization algorithms. If both the design calculations and the iterative optimization algorithm are automated, an optimized design solution can be found within a feasible timeframe. To be able to...
master thesis 2023
document
Kluwer, Thomas (author)
Global warming has caused an increasing demand for renewable energy. Currently, 50% of the renewable energy is provided by wind and solar combined. However, these renewable energy sources are highly volatile. Wave energy converters can provide a stable renewable energy source. Previous research has contributed to understanding various combined...
master thesis 2023
document
Hartman, Illona (author)
In the field of structural and geotechnical engineering, a uniform approach to predict and model foundation settlements during the design phase of a high-rise building appears to be missing. In the Netherlands, pile foundations of tower structures underlain by compressible soil layers are challenging to model due to different stiffness and load...
master thesis 2023
document
van Bergen, Steven (author)
Nanophotonics is the study of structures’ interaction with light with features at or below the nanometer scale. It has gained the interest of many researchers, as it can be used to control the flow of light very effectively in the design of, e.g., solar cells, highly efficient biosensors or lasers. The design of such devices can be non-intuitive...
master thesis 2022
document
Pană, Paul (author)
As a consequence of the difficulty to obtain complete direct information about the subsurface, and the importance of heterogeneity of soil properties in geotechnical design, a desire exists in the geotechnical community for a smarter use of the available data in common practice. The objective of this thesis is to provide a potential solution for...
master thesis 2022
document
Aarsen, Mark (author)
The University of Twente performed experimental uniaxial compression tests of Poly(ether-ether-ketone) (PEEK) and the TU Delft made a comparison with a numerical model; the viscoplastic Eindhoven Glassy Polymer (EGP) model. A higher strain-rate dependency and a higher yield stress at lower temperatures are observed in the experimental results....
master thesis 2022
document
Schots, Joost (author)
Bone drilling is a surgical action required for bone fixation using plates. The holes are currently drilled using a large, conventional drill. This causes problems when limited space is available, de to the size of the drill. For that reason a new, small Compact Drilling System is proposed. In earlier research a compact self-feeding mechanism...
master thesis 2022
document
MUHAMMAD RAYYAN, Rayyan (author)
Using an expensive-to-evaluate numerical model, such as a finite element method (FEM) model, is deemed unavoidable in solving modern geotechnical engineering problems. At the same time, the application of reliability analysis in dealing with uncertainties (e.g. soil properties) is increasing rapidly. This could pose a time-wise problem for an...
master thesis 2022
document
van Tatenhove, Rick (author)
In this report a new enriched finite volume method is introduced. This method will be particularly useful for fluid-structure interaction problems. In engineering many problems are in the domain of fluidstructure interaction. Examples of these are water in sea locks, blood flowing in vessels and sailing ships. Fluid problems are usually solved...
master thesis 2022
document
Arya, Himani (author)
master thesis 2022
document
de Jong, Miranda (author)
Munition articles may be sensitive to case-crushing loading. This is a potential safety hazard since it may lead to accidental detonation. A better understanding of the mechanism causing the munition articles to react can help improve safety. A finite element model combined with post-processing is used to model a Steven test. This thesis...
master thesis 2022
document
Faure, Nils (author)
Glacial Isostatic Adjustment (GIA) is a process which focuses on the deformations of the Earth due to changing ice sheets. It is an important study in Climate Sciences, gravimetric studies and Earth modelling. Studying GIA allows to contribute to a better understanding of the Earth’s composition, thanks to the testing of multiple Earth models,...
master thesis 2022
document
Troost, Léander (author)
Integration of the sensory systems inside patient-specific medical devices (e.g., implants or prosthesis) can provide additional measurement data at different time points. This can result in improving the traditional designs of those medical devices, and consequently leading to increasing the patient’s comfort and quality of life. By doing...
master thesis 2022
Searched for: +
(1 - 20 of 96)

Pages