Searched for: +
(1 - 20 of 188)

Pages

document
Cegielski, Gustaw (author)
Model order reduction (MOR) has been a field of active research in the past twenty years, more recently also in fluid dynamics. The main advantage of MOR is computational cost reduction, which, along with equally important accuracy, constitute main objective in the MOR community.<br/>A main ongoing issue is that data volumes in fluid flow...
master thesis 2021
document
Hogeveen, Kevin (author)
Rubble mound structures are often constructed to prevent severe wave damage to ships. By constructing the crest at a certain level, the waves are reduced such that safety is ensured. However, a large increase in sea level rise is expected in the next century due to climate change. Because of this, multiple adaptations might be necessary to meet...
master thesis 2021
document
Schouten, David (author)
One of the preferred features of plastic is its high durability. This merit is its main disadvantage in the natural environment. When poorly disposed of, plastic waste can enter rivers from surface waters and subsequently end up in the ocean. Here, plastic spreads out over the entire ocean and ultimately ends in ocean gyres....
master thesis 2021
document
Huang, Ziyang (author)
To meet energy demand towards a low-carbon future, the global market demand is growing for metals such as cobalt and nickel which are major elements in batteries. Polymetallic nodules, which are formed on abyssal plains at depths ranging from 4 to 6 kilometres and are distributed in high abundance on the top of the seabed, contains several times...
master thesis 2021
document
Grendysz, Michał (author)
The rocket-based combined cycle (RBCC) engines are a hybrid between rocket and air-breathing propulsion. They can offer performance gains when compared to traditional rocket engines. At the same time, they are relatively simple in design. Therefore, they generally do not require long development times or large funds so they could be an...
master thesis 2021
document
Kleermaker, Wim (author)
The constant impingement of sand particles on the wetted surfaces of a centrifugal dredge pump causes the performance of the pump to deteriorate. Therefore, components or complete pumps have to be replaced after some time. The use of numerical models to estimate the erosion wear in centrifugal dredge pumps can give insight into the principal...
master thesis 2021
document
Kokee, Louis (author)
Computational Fluid Dynamics based on RANS models remain the standard but suffer from high errors in complex flows. In particular, turbulent kinetic energy is over-produced in high strain rate regions, such as the near wake of wind turbine flows. Data-driven turbulence modelling methods aim to derive novel turbulence models with lower...
master thesis 2021
document
van Eeden, Bart (author)
In the oil and gas industry, it is crucial that the transport of hydrocarbons through long pipelines occurs in the most efficient and safest way. These pipelines can cover up to several tens to hundreds of kilometres. Hydrocarbons are not the only fluids present within the pipelines, often they are filled with a mixture of oil, gas, water and...
master thesis 2021
document
Chance, Yannick (author)
Propellers were the first means of powered propulsion for aircraft. However the development of propellers stalled due to the growing interest in jet propulsion. Due to the growing interest in more fuel efficient and environmentally responsible aviation, propeller research is currently seeing a resurgence. <br/><br/>Wingtip-mounted propellers are...
master thesis 2021
document
Vermeijlen, Simon (author)
Swirl-stabilised hydrogen combustion has great potential in the aviation industry since emissions can be significantly reduced compared to fossil fuels. However, a major drawback is a high proneness to flashback. This could be overcome with non-swirling axial air injection (AAI) on the centre-line of the mixing tube. The effect of this concept...
master thesis 2021
document
Stevers, Vera (author)
In the Netherlands, the coastal dunes are essential to protect the country against flooding. However, the rising sea levels increase the risk of flooding along these sandy shores. Moreover, due to a combination of human and natural activities, dune erosion has increased and will continue to do so in the coming decades. Besides flood protection,...
master thesis 2021
document
Levoni, Andrea (author)
In the aviation, maritime and oil&amp;gas sector, the potential benefit in yearly savings deriving from the reduction of turbulent skin-friction drag through active flow control are estimated in the millions of U.S. Dollars and million tonnes of CO2 emissions. Research in this topic has brought forward numerous techniques, offering enticing drag...
master thesis 2021
document
Sousa da Costa, Tiago (author)
Micro-propulsion technology is under rapid development and considerably extends the mission capabilities of small spacecraft. However, the flow in conventional nozzles on a microscale is relatively viscous, which, combined with the bounding nozzle walls, leads to low efficiencies. Aerospike nozzles, on the other hand, offer...
master thesis 2021
document
Meijer, Ralf (author)
The lifespan of internal reforming solid oxide fuel cells (SOFCs) is not yet sufficient. Among other design challenges, this is due to detrimental carbon deposition formations. This must be mitigated, without compromising the power output and efficiency of the fuel cell for it to become a commercial viable product. The carbon that is deposited...
master thesis 2021
document
Haafkes, Thom (author)
During berthing operations of ships, the horizontal thrusters cause a hydraulic load on the quay wall and bed. This could eventually lead to scour holes in the bed, which may affect the structural integrity of the quay wall. This thesis is about a numerical simulation of a bowthruster jet which is deflected by a quay wall and the focus of this...
master thesis 2021
document
Zaky, Michael (author)
Gas turbines for power generation use lean premixed flames to adhere to the strict pollutant emissions regulations. Unfortunately, this often leads to thermoacoustic instabilities. These instabilities can lead to failure of system components, flame blow-off or flashback and a reduction in efficiency. Especially the high frequency transverse...
master thesis 2021
document
Chaves García-Mascaraque, Adrián (author)
A formulation based on the evaluation of power conversions within the system allows to overcome the limitations of conventional momentum analyses to study tightly coupled airframe-propulsion configurations such as Boundary Layer Ingestion. The so-called power balance method is applied in a CFD framework to gain insight about the application of...
master thesis 2021
document
Leijs, Karin (author)
Reducing dredging activities in the harbors brings benefits both economically and environmentally. However, this means that ships may have to sail very close to or even through the mud layer on the seabed, with possible effects on ships’ resistance and manoeuvrability. This study has made a step in understanding these effects on ships’...
master thesis 2021
document
Bockstael, Marnix (author)
Marine structures can sustain damage due to violent wave impacts that are characterized by complex dynamics involving both water and air. Methods that predict impacts loads for structural design often assume the water as incompressible. These predictions can be inaccurate during impacts where air is entrained in water, as that greatly increases...
master thesis 2021
document
Bosma, Lars (author)
Throughout the last century, high energy-density fossil fuels have been the main energy source for merchant shipping. As the world tries to minimize the effects of global warming, shipowners are forced to significantly reduce their $CO_2$ emissions. Because alternative fuels are expensive, the interest in wind energy, which has been the single...
master thesis 2021
Searched for: +
(1 - 20 of 188)

Pages