Searched for:
(1 - 20 of 293)

Pages

document
Liu, Faqi (author), Yang, Hua (author), Yan, R. (author), Wang, Wei (author)
The behaviour of square steel tube confined reinforced concrete columns after fire exposure was studied experimentally and numerically in this paper. Eighteen stub columns were first heated following the ISO 834 standard fire including both heating and cooling phases, and were subsequently loaded to failure after cooling to ambient temperature....
journal article 2019
document
Liu, Tianhan (author), Qin, Hongbo (author), Yang, Daoguo (author), Zhang, G.Q. (author)
For the purpose of exploring the application of two-dimensional (2D) material in the field of gas sensors, the adsorption properties of gas molecules, CO, CO<sub>2</sub>, CH<sub>2</sub>O, O<sub>2</sub>, NO<sub>2</sub>, and SO2 on the surface of monolayered tin selenium in β phase (β-SnSe) has been researched by first principles calculation...
journal article 2019
document
Zhang, Tianyu (author), Ma, Yunjian (author), Tan, Chin Ping (author), Hollmann, F. (author), Wang, Jianrong (author), Yang, Bo (author), Wang, Yonghua (author)
Poor H <sub>2</sub> O <sub>2</sub> -resistance by enzymes is a key bottleneck in the epoxidation process of oil by enzymatic methods. In this study, the stability of three lipases, from Aspergillus oryzae lipase (AOL), Aspergillus fumigatus lipase B (AflB), and marine Janibacter (MAJ1), in the presence of H <sub>2</sub> O <sub>2</sub> was...
journal article 2019
document
Manzaneque Garcia, T. (author), Lu, Ruochen (author), Yang, Yansong (author), Gong, Songbin (author)
This paper demonstrates low-loss acoustic delay lines (ADLs) based on shear-horizontal waves in thin-film LiNbO <sub>3</sub> for the first time. Due to its high electromechanical coupling, the shear-horizontal mode is suited for producing devices with large bandwidths. Here, we show that shear-horizontal waves in LiNbO <sub>3</sub> thin...
journal article 2019
document
Abad, Belkis Filian (author), Lantsoght, E.O.L. (author), Yang, Y. (author)
The Critical Shear Displacement Theory (CSDT) was developed to determine the shear capacity of reinforced concrete beams based on the different shear-carrying mechanisms (concrete in the compression zone, aggregate interlock, and dowel action). This research aims at extending the CSDT to Steel Fibre Reinforced Concrete (SFRC) by adding the...
conference paper 2019
document
Cai, Huayang (author), Savenije, Hubert (author), Garel, Erwan (author), Zhang, Xianyi (author), Guo, Leicheng (author), Zhang, Min (author), Liu, Feng (author), Yang, Qingshu (author)
As a tide propagates into the estuary, river discharge affects tidal damping, primarily via a friction term, attenuating tidal motion by increasing the quadratic velocity in the numerator, while reducing the effective friction by increasing the water depth in the denominator. For the first time, we demonstrate a third effect of river discharge...
journal article 2019
document
Limodio, G. (author), Yang, G. (author), Ge, H. (author), Procel Moya, P.A. (author), de Groot, Y. (author), Mazzarella, L. (author), Isabella, O. (author), Zeman, M. (author)
In this work we develop a rear emitter silicon solar cell integrating carrier-selective passivating contacts (CSPCs) with different thermal budget in the same device. The solar cell consists of a B-doped poly-Si/SiO<sub>x</sub> hole collector and an i/n hydrogenated amorphous silicon (a-Si:H) stack acting as electron collector placed on the...
journal article 2019
document
Yang, Z. (author), Li, Z. (author)
Recent finite element (FE) simulations have revealed the generation and propagation of waves in rail surfaces induced by wheel-rail frictional rolling. These waves have rarely been addressed in the literature. This paper presents an in-depth analysis of these waves, aiming to give new insights into the contact mechanics, a research area in...
journal article 2019
document
Zhao, Ze Xin (author), Lan, Dongming (author), Tan, Xiyu (author), Hollmann, F. (author), Bornscheuer, Uwe T. (author), Yang, Bo (author), Wang, Yonghua (author)
H <sub>2</sub> O <sub>2</sub> , is an attractive oxidant for synthetic chemistry, especially if activated as percarboxylic acid. H <sub>2</sub> O <sub>2</sub> , however, is also a potent inactivator of enzymes. Protein engineering efforts to improve enzyme resistance against H <sub>2</sub> O <sub>2</sub> in the past have mostly focused on...
journal article 2019
document
Yang, Z. (author), Li, Z. (author)
Complex frictional rolling contact and high-frequency wheel dynamic behavior make modeling squeal greatly challenging. The falling-friction effect and wheel mode-coupling behavior are believed to be the two main mechanisms that generate unstable wheel vibration and the resulting squeal noise. To rigorously consider both mechanisms in one...
journal article 2019
document
Ao, Y. (author), Wang, J. (author), Zhou, M. (author), Lindenbergh, R.C. (author), Yang, M. Y. (author)
Panoramic images are widely used in many scenes, especially in virtual reality and street view capture. However, they are new for street furniture identification which is usually based on mobile laser scanning point cloud data or conventional 2D images. This study proposes to perform semantic segmentation on panoramic images and transformed...
journal article 2019
document
Ren, M. (author), Wang, Shuzhong (author), Yang, Chuang (author), Xu, Haitao (author), Guo, Yang (author), Roekaerts, D.J.E.M. (author)
This work reports an experimental study on supercritical water oxidation of quinoline. Moderate preheat temperature (420 °C–510 °C) and initial concentration (1 wt%–10 wt%) are selected to address the possibility of utilizing the heat released during the reaction, in order to realize high conversion rate at relatively low preheat temperature....
journal article 2019
document
Wang, H. (author), Lu, Guoyang (author), Feng, Shuyin (author), Wen, Xiaobo (author), Yang, Jun (author)
Pyrolytic carbon black (CB <sub>p</sub> ) from scrap tire pyrolysis is a potential modifier for the bitumen industry. Binders containing different contents of CB <sub>p</sub> were prepared and experimentally investigated to examine the effects of CB <sub>p</sub> on the electrical and thermal conductivity, conventional physical properties,...
journal article 2019
document
Ma, Jiaming (author), Wei, Yinping (author), Gan, Lin (author), Wang, C. (author), Xia, Heyi (author), Lv, Wei (author), Li, Jia (author), Li, Baohua (author), Yang, Quan Hong (author), Kang, Feiyu (author), He, Yan Bing (author)
It is a huge challenge for high-tap-density electrodes to achieve high volumetric energy density but without compromising the ionic transportation. Herein, we prepared compact Li<sub>4</sub>Ti<sub>5</sub>O<sub>12</sub> (LTO) microspheres consisting of densely packed primary nanoparticles. The real space distribution of lithium ions inside the...
journal article 2019
document
Zhang, Y. (author), Yang, B. (author), Yang, Zhengxian (author), Ye, G. (author)
Capturing the long-term performance of concrete must be underpinned by a detailed understanding of the pore structure. Mercury intrusion porosimetry (MIP) is a widely used technique for pore structure characterization. However, it has been proven inappropriate to measure the pore size distribution of cementitious materials due to the ink-bottle...
journal article 2019
document
Chen, Z. (author), Qu, Ying xia (author), Zeilstra, Christiaan (author), van der Stel, Jan (author), Sietsma, J. (author), Yang, Y. (author)
HIsarna is a promising ironmaking technology to reduce CO <sub>2</sub> emission. Information of phase transformation is essential for reaction analysis of the cyclone reactor of the HIsarna process. In addition, data of density and volume of the ore particles are necessary for estimation of the residence time of the particles in the cyclone...
journal article 2019
document
Limodio, G. (author), D'Herouville, G. (author), Mazzarella, L. (author), Zhao, Y. (author), Yang, G. (author), Isabella, O. (author), Zeman, M. (author)
This work shows an alternative surface cleaning method for c-Si wafers to replace the standard chemical procedures as RCA or HNO <sub>3</sub> which involve hazardous chemicals or unstable processes. The method consists in a high-temperature oxidation treatment (HTO) performed in a classical tube furnace that incorporates organic and metal...
journal article 2019
document
Azof, Fabian Imanasa (author), Yang, Y. (author), Panias, Dimitrios (author), Kolbeinsen, Leiv (author), Safarian, Jafar (author)
The leaching characteristics and mechanism of synthetic CaO-Al <sub>2</sub> O <sub>3</sub> slags in alkaline solution at atmospheric pressure have been studied. The purpose of the study is to have a better understanding of the leaching part of the Pedersen process, as an alternative to the Bayer process for alumina production. The...
journal article 2019
document
Arcondoulis, Elias J. G. (author), Ragni, D. (author), Rubio Carpio, A. (author), Avallone, F. (author), Liu, Yu (author), Yang, Yannian (author), Li, Zhiyong (author)
Porous coated cylinders have been shown to reduce the vortex shedding tone and broadband noise of a bare cylinder placed in uniform flow within specific Reynolds number regimes. The processes by which the vortex shedding and thus tone suppression take place are still uncertain despite numerous numerical and experimental studies. It is understood...
conference paper 2019
document
Chen, X (author), Yang, Y. (author), Evangeliou, P. (author), Van Der Ham, H. (author)
As the bridge stock in The Netherlands and Europe is ageing, various methods to analyse the capacity of existing bridges are being studied. Proof load testing is one of the method to test the capacity of bridges by applying loads on the existing concrete bridges with small spans. Because of the fact that neither the actual traffic load nor the...
conference paper 2019
Searched for:
(1 - 20 of 293)

Pages