Searched for:
(1 - 20 of 40)

Pages

document
Wu, Meimei (author), Ge, W. (author), Li, Zongkun (author), Wu, Zening (author), Zhang, Hexiang (author), Li, Juanjuan (author), Pan, Yipeng (author)
Despite the rapid development of risk analysis in dam engineering, there is a relative absence of research on the environmental impact of dam break. As a systematic theory, set pair analysis has a good effect in dealing with uncertainties, although the result is relatively rough and easy to distort. A connection degree of five grades and a...
journal article 2019
document
Li, Y. (author), Lietaert, Karel (author), Li, W. (author), Zhang, X.Y. (author), Leeflang, M.A. (author), Zhou, J. (author), Zadpoor, A.A. (author)
The corrosion fatigue behavior of additively manufactured topologically ordered porous iron based on diamond unit cells was studied for the first time to understand its response to cyclic loading in a simulated physiological environment. The material exhibited high fatigue resistance with fatigue strengths being 70% and 65% of yield stress in...
journal article 2019
document
Li, Y. (author), Han, Qinglin (author), Horvath, I. (author), Zhang, Guangjun (author)
An approach to repairing surface defects of metal parts is proposed, which includes a combined application of (i) groove machining, (ii) wire and arc additive manufacturing (WAAM), and (iii) finishing machining. The completed analysis revealed that (i) the inclination angle of the groove to be machined is strongly influenced by the...
journal article 2019
document
Li, Z. (author), Zhang, S. (author), Zuo, Y. (author), Chen, Wei (author), Ye, G. (author)
Chemical deformation (chemical shrinkage/expansion), the absolute volume change during reactions, is a key parameter influencing the volume stability, especially the autogenous deformation of a binder material. This work, for the first time, reports an in-depth investigation on the chemical deformation of metakaolin based geopolymer (MKG)....
journal article 2019
document
Zhao, Zhenqiang (author), Dang, Haoyuan (author), Xing, Jun (author), Li, X. (author), Zhang, Chao (author), Binienda, Wieslaw K. (author), Li, Yulong (author)
The mechanical characterization of textile composites is a challenging task, due to their nonuniform deformation and complicated failure phenomena. This article introduces a three-dimensional mesoscale finite element model to investigate the progressive damage behavior of a notched single-layer triaxially-braided composite subjected to axial...
journal article 2019
document
Li, M. (author), Albayrak, A. (author), Zhang, Yu (author), van Eijk, D.J. (author), Yang, Zengyao (author)
The usability now serves as a fundamental quality of a computational device, e.g. smartphone. Moreover, the smartphone has firmly embedded into our daily life as an indispensable part, so the context and style that user may interact with them are largely different from a decade ago. Nowadays, testing usability with end user has become a...
conference paper 2019
document
Zhang, Chi (author), Tang, Qiuhong (author), Chen, Deliang (author), van der Ent, R.J. (author), Liu, Xingcai (author), Li, Wenhong (author), Haile, Gebremedhin Gebremeskel (author)
Precipitation on the Tibetan Plateau (TP) showed different spatial changes during 1979-2016, with an increasing trend over the northern Tibetan Plateau (NTP) and a slightly negative trend over the southern Tibetan Plateau (STP). The changes in precipitation moisture sources over the NTP and STP are investigated using the improved Water...
journal article 2019
document
Shan, Xinmeng (author), Wen, Jiahong (author), Zhang, Min (author), Wang, Luyang (author), Ke, Q. (author), Li, Weijiang (author), Du, Shiqiang (author), Shi, Yong (author), Chen, Kun (author), More Authors (author)
Extreme flooding usually causes huge losses of residential buildings and household properties, which is critical to flood risk analysis and flood resilience building in Shanghai. We developed a scenario-based multidisciplinary approach to analyze the exposure, losses and risks of residential buildings and household properties, and their...
journal article 2019
document
Zhang, Jian (author), Sokolovskij, R. (author), Chen, Ganhui (author), Zhu, Yumeng (author), Qi, Yongle (author), Lin, Xinpeng (author), Li, Wenmao (author), Zhang, G. (author), Jiang, Yu-Long (author), Yu, Hongyu (author)
In this paper, a method to extend the detection range of hydrogen sulfide (H<sub>2</sub>S) gas sensor is demonstrated. The sensor is based on AlGaN/GaN high electron mobility transistors (HEMTs) with Pt gate. It is observed that the as-fabricated devices exhibited sensing signal saturation at 30 ppm H<sub>2</sub>S exposure in dry air. A pre...
journal article 2019
document
Li, Y. (author), Zhang, Z. R. (author), Zhao, Z. Y. (author), Li, H. X. (author), Katgerman, L. (author), Zhang, J. S. (author), Zhuang, L. Z. (author)
New 7xxx aluminum alloys with high alloying contents are being designed, which could induce serious hot tearing defects during direct-chill (DC) casting. Among all factors affecting hot tearing of 7xxx alloys, undoubtedly alloying elements play a significant role. In this study, the effect of main alloying elements (Zn, Mg, and Cu) on hot...
journal article 2019
document
Ma, Yunjian (author), Li, Yongru (author), Willot, S.J. (author), Zhang, W. (author), Ribitsch, Doris (author), Choi, Young Hae (author), Verpoorte, Robert (author), Hollmann, F. (author), More Authors (author)
The use of natural deep eutectic solvents (NADES) as multifunctional solvents for limonene bioprocessing was reported. NADES were used for the extraction of limonene from orange peel wastes, as solvent for the chemoenzymatic epoxidation of limonene, and as sacrificial electron donor for the in situ generation of H <sub>2</sub> O <sub>2</sub>...
journal article 2019
document
Wu, Dequan (author), Zhang, D. (author), Ye, Yuwei (author), Ma, Lingwei (author), Minhas, Badar (author), Liu, Bei (author), Terryn, H.A. (author), Mol, J.M.C. (author), Li, Xiaogang (author)
Recently, lubricant-infused surfaces (LIS) have emerged as a prominent class of surface technology for antifouling, anti-icing and anticorrosion applications. However, long-term corrosion exposure and mechanical damages may deteriorate the practical performance of LIS during application. In this study, a robust LIS was fabricated by the...
journal article 2019
document
Yang, Yang (author), Li, Diquan (author), Tong, Tiegang (author), Zhang, D. (author), Zhou, Yatong (author), Chen, Yangkang (author)
Strong noise is one of the toughest problems in the controlled-source electromagnetic (CSEM) method, which highly affects the quality of recorded data. The three main types of noise existing in CSEM data are periodic noise, Gaussian white noise, and nonperiodic noise, among which the nonperiodic noise is thought to be the most difficult to...
journal article 2018
document
Zhang, Baocheng (author), Teunissen, P.J.G. (author), Yuan, Yunbin (author), Zhang, Xiao (author), Li, Min (author)
Sensing the ionosphere with the global positioning system involves two sequential tasks, namely the ionospheric observable retrieval and the ionospheric parameter estimation. A prominent source of error has long been identified as short-term variability in receiver differential code bias (rDCB). We modify the carrier-to-code leveling (CCL), a...
journal article 2018
document
Zhou, Yatong (author), Li, Shuhua (author), Zhang, D. (author), Chen, Yangkang (author)
We propose a new low-rank based noise attenuation method using an efficient algorithm for tracking subspaces from highly corrupted seismic observations. The subspace tracking algorithm requires only basic linear algebraic manipulations. The algorithm is derived by analysing incremental gradient descent on the Grassmannian manifold of...
journal article 2018
document
Cao, Pinqiang (author), Wu, Jianyang (author), Zhang, Zhisen (author), Fang, Bin (author), Peng, Li (author), Li, Tianshu (author), Vlugt, T.J.H. (author), Ning, Fulong (author)
A sound knowledge of fundamental mechanical properties of water ice is of crucial importance to address a wide range of applications in earth science, engineering, as well as ice sculpture and winter sports, such as ice skating, ice fishing, ice climbing, bobsleighs, and so on. Here, we report large-scale molecular dynamics (MD) simulations...
journal article 2018
document
Li, Shengli (author), Liu, Y. (author), Zhang, H. (author), Cai, Hongming (author), Sun, Fenglian (author), Zhang, G.Q. (author)
In this study, SAC305 and SAC305-0.3Ni solder balls were soldered onto Cu, high temperature treated Cu (H-Cu) and graphene coated Cu (G-Cu) substrates, respectively. The microstructure, the interfacial reaction, and the hardness of the solder joints were investigated. The interfacial intermetallic compound (IMC) is Cu<sub>6</sub>Sn<sub>5</sub...
journal article 2018
document
Li, Yonggang (author), Chen, Ziliang (author), Wen, Sheng (author), Hou, Xiaolin (author), Zhang, R. (author), Ma, Meihu (author)
A modified QuEChERS (quick, easy, cheap, effective, rugged, and safe) method and ultrahigh-performance liquid chromatography coupled to tandem mass spectrometry (UHPLC-MS/MS) were optimized and validated for 16 antibiotics belonging to three families (macrolides, quinolones, and sulfonamides) that were found in preserved eggs. Samples were...
journal article 2018
document
Huang, Yao (author), Deng, Leping (author), Ju, Pengfei (author), Huang, Luyao (author), Qian, H. (author), Zhang, Dawei (author), Li, Xiaogang (author), Terryn, H.A. (author), Mol, J.M.C. (author)
In this study, a new self-healing shape memory polymer (SMP) coating was prepared to protect the aluminum alloy 2024-T3 from corrosion by the incorporation of dual-function microspheres containing polycaprolactone and the corrosion inhibitor 8-hydroxyquinoline (8HQ). The self-healing properties of the coatings were investigated via scanning...
journal article 2018
document
Li, Y. (author), Han, Qinglin (author), Zhang, Guangjun (author), Horvath, I. (author)
Robotic wire and arc additive manufacturing (WAAM) systems are required to provide predictable and efficient operations to fabricate solid metallic parts with high morphological fidelity and geometric accuracy. Since the metallic parts are fabricated based on a layer-by-layer principle, the interactions between the neighboring beads and...
journal article 2018
Searched for:
(1 - 20 of 40)

Pages