Searched for: +
(1 - 20 of 330)

Pages

document
Liu, Baoju (author), Ye, Huiwen (author), Jiang, Junyi (author), Shi, Jinyan (author), Yalçınkaya, Çağlar (author), Šavija, B. (author)
Crystalline admixture (CA) is an effective self-healing agent for mortar. However, the effects of crack parameters (i.e. crack width and cracking age) and the service environment on the self-healing behavior of CA-containing mortar are not well understood. Herein, the self-healing behavior of mortar containing a self-developed CA was assessed...
journal article 2024
document
Liu, C. (author), Li, Zhenming (author), Nie, Shuai (author), Skibsted, Jørgen (author), Ye, G. (author)
Calcium sodium aluminosilicate hydrate C-(N-)A-S-H gels, formed through the alkali-activation of calcium silicate-based materials, may exhibit greater susceptibility to aqueous environments when compared to traditional C-(A-)S-H phases formed by hydration of blended Portland cements. This study investigates structural changes in synthesized C...
journal article 2024
document
Chen, B. (author), Ye, G. (author)
This research explored the microstructure formation and strength development of blended cement pastes prepared with municipal solid waste incineration (MSWI) bottom ash. A new sample preparation approach involving water treatment of MSWI bottom ash was developed to prevent sample cracking caused by the presence of metallic aluminum (Al) in...
journal article 2024
document
Chen, B. (author), Perumal, Priyadharshini (author), Aghabeyk, F. (author), Adediran, Adeolu (author), Illikainen, Mirja (author), Ye, G. (author)
The pursuit of low-carbon binders as alternatives to Portland cement has sparked interest in developing alkali-activated materials (AAM).<sup>1</sup> Using municipal solid waste incineration (MSWI) bottom ash as precursor for AAM has attracted increasing attention as it offers a sustainable, resource-efficient solution to mitigate the...
review 2024
document
Sun, Yubo (author), Mohan, Manu K. (author), Tao, Yaxin (author), Zhang, Yi (author), Van Tittelboom, Kim (author), Ye, G. (author), De Schutter, Geert (author)
To properly control the reaction kinetics and fresh properties evolution in conventional alkali-activated materials (AAMs), a conceptual design of two-stream AAMs has been proposed in this study. This is achieved by dividing the solid and liquid components in AAMs, including blast furnace slag (BFS) and electric arc furnace slag (EFS)...
journal article 2024
document
Chen, B. (author), Chen, J. (author), França de Mendonça Filho, F. (author), Sun, Yubo (author), van Zijl, Marc Brito (author), Copuroglu, Oguzhan (author), Ye, G. (author)
Municipal solid waste incineration (MSWI) bottom ash, due to its high mineral content, presents great potential as supplementary cementitious material (SCM). Weathering, also known as aging, is a treatment process commonly employed in waste management to minimize the risk of heavy metal leaching from MSWI bottom ash. Using weathered MSWI...
journal article 2024
document
Sun, Y. (author), Chen, B. (author), Zhang, Shizhe (author), Blom, C.B.M. (author), Lukovic, M. (author), Ye, G. (author)
With the development of waste recovery techniques, previous research has revealed that coarse fractions of municipal solid waste incineration (MSWI) bottom ash (BA) after proper treatment could be applied in the construction sector, while the fines are seldom recovered in practice and normally landfilled. This study explores the potential...
journal article 2024
document
Wang, S. (author), Zong, Qihang (author), Yang, Huiru (author), Huang, Qianming (author), Ye, Huaiyu (author), French, P.J. (author)
In recent years, flexible strain sensors based on metal cracks have garnered significant interest for their exceptional sensitivity. However, striking a balance between sensitivity and detection range remains a significant challenge, which often limits its wider application. Herein, we introduce an innovative laser transmission pyrolysis...
conference paper 2024
document
Yang, Huiru (author), Huang, Qianming (author), Wang, S. (author), Zong, Qihang (author), Tan, C. (author), Ye, H. (author), Zhang, Kouchi (author)
Flexible strain sensors play a crucial role in health monitoring, smart wearable devices, and human–machine interaction. Three-dimensional surface evaluation methods for strain sensors offer advantages by being closer to actual strain, featuring a larger working range, and being more suitable for multidirectional strain. In this study, a...
journal article 2024
document
Chen, Y. (author), de Lima, Luiz Miranda (author), Li, Zhenming (author), Ma, Bin (author), Lothenbach, Barbara (author), Yin, Suhong (author), Yu, Qijun (author), Ye, G. (author)
The synthesis of N-A-S-H gel with high Si/Al ratios (&gt;2) has been rarely reported in the literature, leaving the establishment of a reliable synthesis route as an open challenge. This paper aims to synthesize N-A-S-H gels with Si/Al ratios ranging from 1 to 3 and establish their thermodynamic database. The effects of reaction temperature,...
journal article 2024
document
Zuo, Yibing (author), Liao, Yishun (author), Ye, G. (author)
Thermodynamic parameters of chloride and sulfate intercalated hydrotalcites were deduced. The phase evolutions in alkali‑activated slag cement upon only sodium chloride or only magnesium sulfate attack and combined attack of those two salts were investigated via thermodynamic modelling. Friedel's salt was predicted to form under sodium...
journal article 2023
document
Xu, Z. (author), Ye, G. (author)
One of the key problems that affect the durability of reinforced concrete structures is the corrosion of rebar induced by chloride. Despite the complicated transport mechanism of chloride ions in cementitious materials, diffusion is still the key mechanism of chloride ingress. The determination of the chloride diffusion coefficient will help to...
journal article 2023
document
Zhang, Shizhe (author), He, S. (author), Ghiassi, Bahman (author), van Breugel, K. (author), Ye, G. (author)
This paper presents an experimental study on the interface bonding properties of polyvinyl alcohol (PVA) fiber in alkali-activated slag/fly ash (AASF) pastes. Three interface bonding properties (i.e., the chemical bonding energy Gd, the initial frictional bond strength τ0, and slip-hardening behavior) were determined using single-fiber pullout...
journal article 2023
document
Ma, Yuwei (author), Gong, Jihao (author), Ye, G. (author), Fu, Jiyang (author)
The high autogenous shrinkage of alkali-activated fly ash/slag (AASF) poses a significant concern for the widespread application of AASF in structural engineering. The present study compares the efficacy of activator and mineral admixtures in mitigating the autogenous shrinkage of AASF, and discusses the underlying mechanism. The results show...
journal article 2023
document
Tan, C. (author), Wang, S. (author), Yang, Huiru (author), Huang, Qianming (author), Li, Shizhen (author), Liu, X. (author), Ye, H. (author), Zhang, Kouchi (author)
Short-wave ultraviolet (also called UVC) irradiation is a well-adopted method of viral inactivation due to its ability to damage genetic material. A fundamental problem with the UVC inactivation method is that its mechanism of action on viruses is still unknown at the molecular level. To address this problem, herein we investigate the...
journal article 2023
document
Sun, Yubo (author), Cheng, H. (author), Zhang, Shizhe (author), Mohan, Manu K. (author), Ye, G. (author), De Schutter, Geert (author)
Alkali-activated concrete (AAC) is regarded as a promising alternative construction material to reduce the CO<sub>2</sub> emission induced by Portland cement (PC) concrete. Due to the diversity in raw materials and complexity of reaction mechanisms, a commonly applied design code is still absent to date. This study attempts to directly...
journal article 2023
document
Sun, Beibei (author), Sun, Yubo (author), Ye, G. (author), De Schutter, Geert (author)
Although the application of blast furnace slag and fly ash-based alkali-activated concrete (BFS/FA-AAC) has both economic and environmental benefits, it is limited by the lack of a straightforward mix design method. In this paper, an experiment was conducted to investigate the effect of control factors, including the Na<sub>2</sub>O/binder...
journal article 2023
document
Sheng, Yue (author), Jin, Sheng (author), Comeau, M.J. (author), Hou, Zengqian (author), Zhang, Letian (author), Wei, Wenbo (author), Ye, Gaofeng (author)
The Dinggye region, in the central part of the Himalayan orogenic belt, includes the southern part of the Xainza-Dinggye rift and the Mabja Gneiss Dome with leucogranite cores. Previous studies of gneiss domes in this region report the existence of channel flow processes or tectonic exhumation, in addition to partial melting of orogenic mid...
journal article 2023
document
SUN, Beibei (author), DING, Luchuan (author), Ye, G. (author), De SCHUTTER, Geert (author)
In this paper, 871 data were collected from literature and trained by the 4 representative machine learning methods, in order to build a robust compressive strength predictive model for slag and fly ash based alkali activated concretes. The optimum models of each machine learning method were verified by 4 validation metrics and further...
journal article 2023
document
Tong, Liang-yu (author), Xiong, Qing Xiang (author), Zhang, Zhidong (author), Chen, Xiangsheng (author), Ye, G. (author), Liu, Qing feng (author)
This paper develops a novel lattice diffusive model to quantitatively study the chloride diffusion coefficient in unsaturated cementitious materials, in which the pore voxels are redistributed to make a better representation of a real microstructure of hardened cement paste. Considering the hierarchical microstructure and different drying...
journal article 2023
Searched for: +
(1 - 20 of 330)

Pages