A conceptual design of two-stream alkali-activated materials

To properly control the reaction kinetics and fresh properties evolution in conventional alkali-activated materials (AAMs), a conceptual design of two-stream AAMs has been proposed in this study. This is achieved by dividing the solid and liquid components in AAMs, including blast furnace slag (BFS) and electric arc furnace slag (EFS)...

Interpretation of the early stiffening process in alkali-activated slag pastes

To better understand early stiffening of AAS pastes, distinctive microstructural features by varying the silicate modulus (Ms) have been visualized with in-situ microscopy. In addition, the activation reaction was monitored with multiple approaches, while solid and liquid phases in hydrating AAS were characterized separately. In silicate...

Rheology of alkali-activated slag pastes: New insight from microstructural investigations by cryo-SEM

This study aims to interpret the early-stage rheology of alkali-activated slag (AAS) paste from microstructure perspectives. The microstructures visualized by cryogenic scanning electron microscopy (cryo-SEM) revealed the essential distinction between hydroxide and silicate-activated slag pastes. The hydroxide-based mixture showed typical...

Fracture properties and microstructure formation of hardened alkali-activated slag/fly ash pastes

This study presents a comprehensive experimental investigation on the fracture properties of hardened alkali-activated slag/fly ash (AASF) pastes in relation to the microstructure formation and reaction product composition. The main reaction product in AASF is C-(N-)A-S-H gel along with minor hydrotalcite phase, with the polymerization of C-...

Internal curing of alkali-activated slag-fly ash paste with superabsorbent polymers

This study investigates the influences of internal curing on reducing the autogenous shrinkage of alkali-activated slag/fly ash (AASF) paste. The influences of internal curing with superabsorbent polymers (SAPs) on the reactions and microstructure of AASF paste are investigated. It is found that the SAPs absorb liquid mainly before the...

Extension of the Hymostruc3D model for simulation of hydration and microstructure development of blended cements

The HYMOSTRUC3D model has been used successfully to predict hydration and microstructure development of pure Portland cement paste. In recent years, a number of numerical models were proposed for optimizing the use of supplementary cementitious materials. Also HYMOSTRUC3D was extended for simulating the hydration and microstructure development...

Waste glass as partial mineral precursor in alkali-activated slag/fly ash system

The feasibility of a waste glass powder residue (GP) from glass recycling as partial mineral precursor to produce alkali-activated materials is investigated. GP served as powder coal fly ash (PCFA) replacement within a reference system composed of 50% PCFA and 50% ground granulated blast furnace slag (GGBS). Compared with PCFA, GP was better...

Experimental study on pore connectivity and its influence on chloride transport in saturated cementitious system

The purpose of this paper is to investigate the pore connectivity and its influence on chloride transport property in cementitious materials under saturated condition. Mercury intrusion porosimetry experiment was carried out on a variety of hydrated cement pastes curing up to one year. By repeating pressurization-depressurization cycles, pore...

Numerical simulation of the hydration process and the development of microstructure of self-compacting cement paste containing limestone as filler