Searched for:
(1 - 20 of 549)

Pages

document
Litjens, R. (author), Zhang, Haibin (author)
A suitability assessment and performance optimisation is presented of narrowband Internet of Things (NB-IoT) cellular technology for use in smart energy distribution networks. The focus is on the reliable and timely delivery of outage restoration and management (ORM) messages at the event of a local or regional power outage. Both the cellular...
journal article 2019
document
Zhao, Yuan (author), Alderliesten, R.C. (author), Wu, Zengwen (author), Zhou, Zhengong (author), Fang, Guodong (author), Zhang, Jiazhen (author), Benedictus, R. (author)
Finite-width-correction factors (FWCF) are required for GLARE to accurately predict fatigue crack growth using linear elastic fracture mechanics. As demonstrated in earlier work, these factors effectively correct for the change in specimen compliance, which in GLARE relates to intact fibre layers and the formation of delaminations between...
journal article 2019
document
Zhang, H. (author)
High power electronics with wide band gap semiconductors are becoming the most promising devices in new energy power suppliers and converters. Highly reliable die attach materials, serving as one of interconnections, play critical roles in power electronic packages and modules. Among which, the nanosilver paste/film has become a promising die...
doctoral thesis 2019
document
Zhang, D. (author), Bluijssen, P.M. (author)
Indoor environmental quality (IEQ) in classrooms can have an effect on school children’s comfort, health, and performance. In most classrooms, the teacher is the only one who can take actions to change the IEQ. The objective of this study was to identify what teachers usually do to improve IEQ in classrooms and how these actions relate to...
journal article 2019
document
Zhang, C. (author)
In conventional applications, such as bio-imaging and microscopy, SPAD is typically used as a single-photon counter. However, this advantage has been challenged by other photon-counting technologies, especially from CMOS-based QIS. Comparatively, apart from single-photon counting capability, QIS is superior to SPAD in terms of intrinsic multi...
doctoral thesis 2019
document
Wu, Meimei (author), Ge, W. (author), Li, Zongkun (author), Wu, Zening (author), Zhang, Hexiang (author), Li, Juanjuan (author), Pan, Yipeng (author)
Despite the rapid development of risk analysis in dam engineering, there is a relative absence of research on the environmental impact of dam break. As a systematic theory, set pair analysis has a good effect in dealing with uncertainties, although the result is relatively rough and easy to distort. A connection degree of five grades and a...
journal article 2019
document
Zhang, Y. (author)
Among all the contributors to fatal accidents, in-flight loss of control (LOC-I) remains one of the largest categories, as indicated by statistics of investigations into past civil aircraft accidents. In flight LOC generally refers to accidents in which the flight crew was unable to maintain control of the aircraft in flight, resulting in an...
doctoral thesis 2019
document
Zhang, T. (author)
Patients with colorectal cancer are frequently presented with liver metastases for which (partial) resection is often the best therapy. However, the future remnant liver, the remaining part of the liver after resection, should allow adequate liver function to avoid liver failure. This thesis presents novel methods for the accurate voxel-wise...
doctoral thesis 2019
document
Zhang, H. (author), Liu, Y. (author), Wang, Lingen (author), Sun, Fenglian (author), Fan, Xuejun (author), Zhang, G.Q. (author)
The nanoindentation test was conducted in this paper to investigate the indentation hardness, plasticity and initial creep properties of pressure sintered nanosilver joint at various test temperatures. The effects of strain rate on the indentation hardness were first investigated. Then yield stress of nanosilver sintered joint was studied in...
journal article 2019
document
Zhang, Z. (author)
Saltwater intrusion is a crucial issue in estuaries. The spread of salinity is described by the dispersion coefficient. A purely empirical equation which links the effective tidal average dispersion to the freshwater discharge was developed by Van der Burgh [1972]. Combining it with the salt balance equation, Savenije [1986] derived a one...
doctoral thesis 2019
document
Zhang, H. (author), Šavija, B. (author), Lukovic, M. (author), Schlangen, E. (author)
This work proposes a method for numerically investigating the fracture mechanism of cement paste at the microscale based on X-ray computed tomography and nanoindentation. For this purpose, greyscale level based digital microstructure was generated by X-ray microcomputed tomography with a resolution of 2 μm/voxel length. In addition,...
journal article 2019
document
Xu, Y. (author), Zhang, H. (author), Šavija, B. (author), Chaves Figueiredo, S. (author), Schlangen, E. (author)
A method is presented to model deformation and fracture behavior of 3D printed disordered lattice materials under uniaxial tensile load. A lattice model was used to predict crack pattern and load-displacement response of the printed lattice materials. To include the influence of typical layered structures of 3D printed materials in the...
journal article 2019
document
Wang, H. (author), Zhang, Yue (author), Zhang, Yi (author), Feng, Shuyin (author), Lu, Guoyang (author), Cao, Lintao (author)
Microwave heating is an encouraging heating technology for the maintenance, recycling, and deicing of asphalt pavement. To investigate the microwave heating properties of asphalt mixture, laboratory tests and numerical simulations were done and compared. Two types of Stone Mastic Asphalt (SMA) mixture samples (with basalt aggregates and steel...
journal article 2019
document
Jing, Guoqing (author), Zhang, Xu (author), Jia, J. (author)
To mitigate the ballast flight risk in the high-speed railway, this paper presents three new polyurethane bonding schemes which have negligible influence to tamping operations. With the application of these bonding schemes, a series of laboratory tests indicated that the polyurethane-reinforced ballast exhibited much larger lateral resistance...
journal article 2019
document
Qu, C. (author), Zhan, X. (author), Wang, Guanghui (author), Wu, Jianliang (author), Zhang, Zi-Ke (author)
Many systems are dynamic and time-varying in the real world. Discovering the vital nodes in temporal networks is more challenging than that in static networks. In this study, we proposed a temporal information gathering (TIG) process for temporal networks. The TIG-process, as a node's importance metric, can be used to do the node ranking. As...
journal article 2019
document
Mehta, D. (author), Zhang, Y. (author), van Zuijlen, A.H. (author), Bijl, H. (author)
Despite advances in turbulence modelling, the Smagorinsky model remains a popular choice for large eddy simulation (LES) due to its simplicity and ease of use. The dissipation in turbulence energy that the model introduces, is proportional to the Smagorinsky constant, of which many different values have been proposed. These values have been...
journal article 2019
document
Li, Y. (author), Zhang, Z. R. (author), Zhao, Z. Y. (author), Li, H. X. (author), Katgerman, L. (author), Zhang, J. S. (author), Zhuang, L. Z. (author)
New 7xxx aluminum alloys with high alloying contents are being designed, which could induce serious hot tearing defects during direct-chill (DC) casting. Among all factors affecting hot tearing of 7xxx alloys, undoubtedly alloying elements play a significant role. In this study, the effect of main alloying elements (Zn, Mg, and Cu) on hot...
journal article 2019
document
Tieves, F. (author), Willot, S.J. (author), van Schie, M.M.C.H. (author), Rauch, M.C.R. (author), Younes, S.H.H. (author), Zhang, W. (author), Dong, J. (author), Gomez de Santos, P. (author), Hollmann, F. (author)
generation. In analogy to the well-known formate dehydrogenase to...
journal article 2019
document
Zhang, J. (author), van den Boom, S.J. (author), van Keulen, A. (author), Aragon, A.M. (author)
A new enriched finite element technique, named the Discontinuity-Enriched Finite Element Method (DE-FEM), was introduced recently for solving problems with both weak and strong discontinuities in 2-D. In this mesh-independent procedure, enriched degrees of freedom are added to new nodes collocated at the intersections between discontinuities...
journal article 2019
document
Zhang, Zhixia (author), Zhang, Long (author), Yan, Xinlin (author), Wang, Hongqiang (author), Liu, Yanyan (author), Yu, C. (author), Cao, Xiaoting (author), van Eijck, L. (author), Wen, Bin (author)
Br as solid electrolyte synthesized by a facile solid-state sintering. Different from other O-incorporated sulfides,...
journal article 2019
Searched for:
(1 - 20 of 549)

Pages