Characterization, pre-treatment, and potential applications of fine MSWI bottom ash as a supplementary cementitious material

With the development of waste recovery techniques, previous research has revealed that coarse fractions of municipal solid waste incineration (MSWI) bottom ash (BA) after proper treatment could be applied in the construction sector, while the fines are seldom recovered in practice and normally landfilled. This study explores the potential...

A novel lattice model to predict chloride diffusion coefficient of unsaturated cementitious materials based on multi-typed pore structure characteristics

This paper develops a novel lattice diffusive model to quantitatively study the chloride diffusion coefficient in unsaturated cementitious materials, in which the pore voxels are redistributed to make a better representation of a real microstructure of hardened cement paste. Considering the hierarchical microstructure and different drying...

Reactivity and leaching potential of municipal solid waste incineration (MSWI) bottom ash as supplementary cementitious material and precursor for alkali-activated materials

This work evaluated the reactivity and leaching potential of municipal solid waste incineration (MSWI) bottom ash as supplementary cementitious material (SCM) and precursor for alkali-activated materials (AAM). The chemical composition of the amorphous phase in MSWI bottom ash was found to be in the same range as that of Class F coal fly ash....

A facile method to prepare oriented boron nitride-based polymer composite with enhanced thermal conductivity and mechanical properties

Hexagonal boron nitride (BN) is often used as filler to improve the thermal conductivity of polymer matrix due to its high thermal conductivity. However, previously reported BN-based composites always have a high in-plane thermal conductivity, which is not beneficial for vertical heat dissipation. In addition, high BN content results in the...

Potential application of MSWI bottom ash as substitute material in Portland cement concrete: Filler or binder

In recent years, the rapid industrialization and urbanization led to the explosive growth of municipal solid waste incineration (MSWI) bottom ashes (BA) production. However, most of them are directly landfilled, which not only brings environmental burden but also results in loss of potential resources. Present researches have proved that MSWI BA...

Potential application of MSWI bottom ash as substitute material in Portland cement concrete: Filler or binder

In recent years, the rapid industrialization and urbanization led to the explosive growth of municipal solid waste incineration (MSWI) bottom ashes (BA) production. However, most of them are directly landfilled, which not only brings environmental burden but also results in loss of potential resources. Present researches have proved that MSWI BA...

Revisiting China’s Sponge City Planning Approach: Lessons From a Case Study on Qinhuai District, Nanjing

Integrating sustainable urban water management into the urban planning process is essential for developing water-resilient cities. To this end, the central government of the People’s Republic of China initiated the “Sponge City” programme. However, challenges and gaps exist in current urban planning practice. The operationalizable planning...

Pre-Treatments Of Mswi Bottom Ash For The Application As Supplementary Cementitious Material In Blended Cement Paste

At present, most municipal solid waste incineration (MSWI) bottom ash, as being disposed of as waste, is directly landfilled, raising concern about the environmental issue and potential loss of resources. Given that the natural raw materials used for cement production are being depleted, the recycling of MSWI bottom ash for the application as...

Chemical deformation of metakaolin based geopolymer

Chemical deformation (chemical shrinkage/expansion), the absolute volume change during reactions, is a key parameter influencing the volume stability, especially the autogenous deformation of a binder material. This work, for the first time, reports an in-depth investigation on the chemical deformation of metakaolin based geopolymer (MKG)....

Germanene on single-layer ZnSe substrate: Novel electronic and optical properties

In this work, the structural, electronic and optical properties of germanene and ZnSe substrate nanocomposites have been investigated using first-principles calculations. We found that the large direct-gap ZnSe semiconductors and zero-gap germanene form a typical orbital hybridization heterostructure with a strong binding energy, which shows...

Promoting sensitivity and selectivity of HCHO sensor based on strained InP₃ monolayer: A DFT study

Sensitive materials for formaldehyde (HCHO) sensor need high sensitivity and selectivity. The research on two dimensional (2D) sensitive material is growing, and most studies focus on the pristine or modified graphene. So it is essential to introduce other 2D materials into HCHO gas sensor. In this report, the adsorption behaviors of organic...

Numerical thermal analysis and optimization of multi-chip LED module using response surface methodology and genetic algorithm

In this paper, the heat transfer performance of the multi-chip (MC) LED module is investigated numerically by using a general analytical solution. The configuration of the module is optimized with genetic algorithm (GA) combined with a response surface methodology. The space between chips, the thickness of the metal core printed circuit board...

Nitrogen Dioxide Gas Sensor Based on Monolayer SnS: A First-Principle Study

The sensing behavior of monolayer tin sulfide (SnS) for four gas molecules (NH₃, NO₂, CO, and H₂O) are studied by the first-principle calculation based on density-functional theory. We calculate adsorption energy, adsorption distance, and Hirshfeld charge to estimate the adsorption ability of monolayer SnS for...

Overdriving reliability of chip scale packaged LEDs: Quantitatively analyzing the impact of component

The objective of this study is to quantitatively evaluate the impacts of LED components on the overdriving reliability of high power white LED chip scale packages (CSPs). The reliability tests under room temperature are conducted over 1000 h in this study on CSP LEDs with overdriving currents. A novel method is proposed to investigate the...

A review of small heat pipes for electronics

Heat pipes (HPs) have received considerable attention in recent decades, especially in the field of cooling electronics, which requires the removal of added heat from an area of limited volume to the environment. Small HPs are widely used in electronic applications, which are normally limited by the compact structure and dimensions of the...

Thermal inductance in GaN devices

Using the analogue of the electric inductance, we reveal the properties of the thermal inductance in GaN-based light-emitting diode devices by testing their transient thermal behaviors. We find that the devices exhibit a transient thermal response under step-down or step-up currents and observe notable inductive phenomena of the temperature...