Searched for:
(1 - 20 of 31)

Pages

document
Maghsoudloo, A. (author), Galavi, Vahid (author), Hicks, M.A. (author), Askarinejad, A. (author)
Static liquefaction is one of the principal triggering mechanisms of failure in fully saturated loose sand slopes both in offshore and onshore regions. Static liquefaction induced landslides are known for their significant softening and a fluid-like behavior at the onset of failure. However, the literature lacks experimentally verified advanced...
conference paper 2017
document
Alakhramsing, S. (author), Van Ostayen, R.A.J. (author), Eling, R.P.T. (author)
Accurate prediction of cavitation is an important feature in hydrodynamic bearing modeling. Especially for thermo-hydrodynamic modeling, it is crucial to use a mass-conservative cavitation algorithm. This paper introduces a new mass-conserving Reynolds cavitation algorithm, which provides fast convergence and easy implementation in finite...
journal article 2015
document
Zhebel, E. (author), Minisini, S. (author), Kononov, A. (author), Mulder, W.A. (author)
With the rapid developments in parallel compute architectures, algorithms for seismic modeling and imaging need to be reconsidered in terms of parallelization. The aim of this paper is to compare scalability of seismic modeling algorithms: finite differences, continuous mass-lumped finite elements and discontinuous Galerkin finite elements. The...
journal article 2013
document
Liu, X. (author), Scarpas, A. (author), Li, J. (author), Tzimiris, G. (author), Hofman, R. (author), Voskuilen, J. (author)
In order to adequately characterize the adhesive bonding strength of the various membranes with surrounding materials on orthotropic steel decks and collect the necessary parameters for FE modeling, details of the Membrane Adhesion Test (MAT) are introduced. Analytical constitutive relations of the MAT device have been derived using the same...
conference paper 2013
document
Andreykiv, A. (author), Janssen, D. (author), Nelissen, R.G.H.H. (author), Vlastar, E.R. (author)
Background Cement injection into osteolytic areas around the cement mantle is a technique for refixation of loose hip implants for patients who cannot undergo standard revision surgery. Preliminary clinical results show the improvement in walking distance, patients' independence and pain relief. Methods In this study, we use a detailed finite...
journal article 2012
document
Morales, W.F. (author), Laue, J. (author), Zweidler, A. (author), Springman, S.M. (author)
Structural analysis of new devices to be used in centrifuge facilities can be a challenging task. Initial calculations, based on simple basic static principles, are usually used. However, as devices placed in a geotechnical centrifuge are often complex structures, advanced analysis methods to assess their performance under enhanced acceleration...
conference paper 2012
document
Liu, X. (author), Scarpas, A. (author), Li, J. (author), Tzimiris, G. (author)
In order to characterize adequately the adhesive bonding strength of the various membranes with surrounding materials on orthotropic steel decks and collect the necessary parameters for FE modeling, details of the Membrane Adhesion Test (MAT) have been introduced. Analytical constitutive relations of MAT device have been derived on the basis of...
conference paper 2012
document
Li, J. (author), Liu, X. (author), Scarpas, A. (author), Tzimiris, G. (author)
In the Netherlands an asphaltic surfacing structure for orthotropic steel bridge decks mostly consists of two structural layers. The upper layer consists of Porous Asphalt (PA) because of reasons related to noise hindrance. For the lower layer a choice between Mastic Asphalt (MA) or Guss Asphalt (GA), can be made. In this paper, a typical Dutch...
conference paper 2012
document
Rajabalinejad, M. (author)
Probabilistic techniques in engineering problems are needed because they provide a deeper understanding of failure mechanisms and occurrence probabilities than deterministic techniques. In addition, they draw our attention to the consequences of failure at an early stage in the design process. However, to achieve these advantages, a well-defined...
doctoral thesis 2009
document
Abdelal, G.F. (author), Bakr Elhady, A. (author), Kassab, M. (author)
Solar array rotation mechanism provides a hinged joint between the solar panel and satellite body, smooth rotation of the solar array into deployed position and its fixation in this position. After unlocking of solar panel (while in orbit), rotation bracket turns towards ready-to-work position under the action of driving spring. During...
journal article 2009
document
Bakker, K.J. (author)
The topic of this thesis is the development of models for the structural analysis of soil retaining structures. The soil retaining structures being looked at are; block revetments, flexible retaining walls and bored tunnels in soft soil. Within this context typical structural behavior of these structures is discussed too. The emphasis within the...
doctoral thesis 2000
document
Peerlings, R.H.J. (author), De Borst, R. (author), Brekelmans, W.A.M. (author), De Vree, J.H.P. (author), Spee, I. (author)
journal article 1996
document
De Borst, R. (author), Groen, A.E. (author)
journal article 1995
document
Gutierrez, M.A. (author), De Borst, R. (author), Schellekens, J.C.J. (author), Sluys, L.J. (author)
journal article 1995
document
Carmeliet, J. (author), De Borst, R. (author)
journal article 1995
document
Gong, D. (author)
doctoral thesis 1995
document
Pamin, J. (author), De Borst, R. (author)
journal article 1995
document
De Borst, R. (author), Pamin, J. (author), Peerlings, R.H.J. (author), Sluys, L.J. (author)
journal article 1995
document
Hashagen, F. (author), Schellekens, J.C.J. (author), De Borst, R. (author), Parisch, H. (author)
journal article 1995
document
Pamin, J. (author), De Borst, R. (author)
journal article 1995
Searched for:
(1 - 20 of 31)

Pages