Searched for:
(1 - 20 of 515)

Pages

document
Mulder, Maarten (author), Li, Xuesong X. (author), Nazim, M.M. (author), Dalgliesh, Robert M. (author), Tian, B. (author), Buijse, Marten (author), van Wunnik, John (author), Bouwman, W.G. (author)
O, an alkane, an anionic internal olefin sulfonate surfactant, salt and secondary butyl alcohol (SBA) as co-solvent are studied in a systematic way. In four different sample sets, either the salt content, SBA content or alkane carbon number was varied in order to study the effects of the...
journal article 2019
document
Wang, Q (author), Wang, X. J. (author), Li, G. Q. (author), Liu, Y. (author)
Band segregation has been found in the H13 die steel produced by the electroslag remelting (ESR) technology. Chemical and metallographic studies have been carried out on a one ton ESR ingot of H13 die steel, so as to understand the formation mechanism of the band segregation. The results indicate that the T.O content and S content decreased...
journal article 2019
document
Li, Wei (author), Li, Zongkun (author), Ge, W. (author), Wu, Sai (author)
The internal mechanism affecting life loss caused by a dam-break flood is complicated. On the basis of analyzing the risk formation path, a risk evaluation indicator system was established which included the hazards, exposure and vulnerability factors. Variable Fuzzy Sets theory was introduced into the risk evaluation of life loss risk grades...
journal article 2019
document
Röggla, Thomas (author), Li, Jie (author), Fjellsten, Stefan (author), Jansen, Jack (author), Kegel, Ian (author), Pilgrim, Luke (author), Trimby, Martin (author), Williams, Doug (author), Cesar Garcia, P.S. (author)
While traditional live-broadcasting is typically comprised of a handful of well-defined workflows, these become insufficient when targeting multiple screens and interactive companion devices on the viewer side. In this case study, we describe the development of an end-to-end system enabling immersive and interactive experiences using an...
conference paper 2019
document
Wu, Meimei (author), Ge, W. (author), Li, Zongkun (author), Wu, Zening (author), Zhang, Hexiang (author), Li, Juanjuan (author), Pan, Yipeng (author)
Despite the rapid development of risk analysis in dam engineering, there is a relative absence of research on the environmental impact of dam break. As a systematic theory, set pair analysis has a good effect in dealing with uncertainties, although the result is relatively rough and easy to distort. A connection degree of five grades and a...
journal article 2019
document
Li, S. (author), de Wagter, C. (author), de Visser, C.C. (author), Chu, Q. P. (author), de Croon, G.C.H.E. (author)
High-speed flight in GPS-denied environments is currently an important frontier in the research on autonomous flight of micro air vehicles. Autonomous drone races stimulate the advances in this area by representing a very challenging case with tight turns, texture-less floors, and dynamic spectators around the track. These properties hamper...
journal article 2019
document
Li, Y. (author)
Safety management systems (SMSs) have gained importance since the 1970s and changed focus from individual management activities to more systematic frameworks. The methods, techniques and tools used in them also became more and more sophisticated. However, from the perspectives of the researcher, company, auditor, government and (safety...
doctoral thesis 2019
document
Li, J. (author)
With the growth of global population, the big cities become increasingly crowded. It is not rare to see large crowds in public transportations and events with masses of visitors, such as music festivals and football matches. The question “How to deal with crowds” is receiving attention, both from academia and practical crowd management.
This...
doctoral thesis 2019
document
Hendrickx, N.W. (author), Tagliaferri, M.L.V. (author), Li, R. (author), Franke, D.P. (author), Sammak, A. (author), Brinkman, A. (author), Scappucci, G. (author), Veldhorst, M. (author)
We fabricate Josephson field-effect transistors in germanium quantum wells contacted by superconducting aluminum and demonstrate supercurrents carried by holes that extend over junction lengths of several micrometers. In superconducting quantum point contacts we observe discretization of supercurrent, as well as Fabry-Pérot resonances,...
journal article 2019
document
Bohra, D. (author), Ledezma Yanez, I.D. (author), Li, G. (author), de Jong, W. (author), Pidko, E.A. (author), Smith, W.A. (author)
) intermediate *OCHO, aiming to resolve the discrepancy between the theoretical understanding and experimental performance of Ag. We show that...
journal article 2019
document
Schuemann, J. (author), Barbieri, S (author), Brown, J.M.C. (author), Cucinotta, F. A. (author), Li, W. (author), More Authors (author)
Our understanding of radiation-induced cellular damage has greatly improved over the past few decades. Despite this progress, there are still many obstacles to fully understand how radiation interacts with biologically relevant cellular components, such as DNA, to cause observable end points such as cell killing. Damage in DNA is identified...
journal article 2019
document
Li, Q. (author), Liu, Xinyuan (author), Eitelberg, G. (author), Veldhuis, L.L.M. (author)
This paper addresses the design of swirl recovery vanes for propeller propulsion in tractor configuration at cruise conditions using numerical tools.Amultifidelity optimization framework is formulated for the design purpose, which exploits low-fidelity potential flow-based analysis results as input for high-fidelity Euler equation-based...
journal article 2019
document
Li, Y. (author), Zhang, Z. R. (author), Zhao, Z. Y. (author), Li, H. X. (author), Katgerman, L. (author), Zhang, J. S. (author), Zhuang, L. Z. (author)
New 7xxx aluminum alloys with high alloying contents are being designed, which could induce serious hot tearing defects during direct-chill (DC) casting. Among all factors affecting hot tearing of 7xxx alloys, undoubtedly alloying elements play a significant role. In this study, the effect of main alloying elements (Zn, Mg, and Cu) on hot...
journal article 2019
document
Garufo, A. (author), Sberna, P.M. (author), Carluccio, G. (author), Freeman, Joshua R. (author), Bacon, David R. (author), Li, Lianhe (author), Baselmans, J.J.A. (author), Llombart Juan, N. (author), Neto, A. (author), More Authors (author)
A pulsed photoconductive terahertz (THz) source is presented that is able to radiate milliwatt (mW) level average power over a large bandwidth, by exploiting both the optical and electrical properties of photoconductive sources and the ultrawideband properties of connected antenna arrays. An optical system composed of a microlenses array...
journal article 2019
document
Yuan, Zhenyu (author), Wang, Jie (author), Wang, Y. (author), Liu, Q. (author), Zhong, Yujie (author), Wang, Yu (author), Li, Li (author), Lincoln, Stephen F. (author), Guo, Xuhong (author)
A biocompatible Dex-MA/PAA hydrogel was prepared through copolymerization of glycidyl methacrylate substituted dextran (Dex-MA) with acrylic acid (AA), which was applied as the adsorbent to remove cationic dyes from aqueous solutions. Dex-MA/PAA hydrogel presented a fast adsorption rate and the removal efficiency of Methylene Blue (MB) and...
journal article 2019
document
Li, Y. (author), Lietaert, Karel (author), Li, W. (author), Zhang, X.Y. (author), Leeflang, M.A. (author), Zhou, J. (author), Zadpoor, A.A. (author)
The corrosion fatigue behavior of additively manufactured topologically ordered porous iron based on diamond unit cells was studied for the first time to understand its response to cyclic loading in a simulated physiological environment. The material exhibited high fatigue resistance with fatigue strengths being 70% and 65% of yield stress in...
journal article 2019
document
Li, S. (author), Liu, J. (author), Negenborn, R.R. (author)
Over the past two decades, a number of methods have been proposed for solving maritime collision avoidance problems. Most of these works take a single ship's perspective and focus on one-to-one or one-to-many situations. To more complicated many-to-many situations, less attention has been paid. To deal with the many-to-many collision...
journal article 2019
document
Li, Y. (author), Han, Qinglin (author), Horvath, I. (author), Zhang, Guangjun (author)
An approach to repairing surface defects of metal parts is proposed, which includes a combined application of (i) groove machining, (ii) wire and arc additive manufacturing (WAAM), and (iii) finishing machining. The completed analysis revealed that (i) the inclination angle of the groove to be machined is strongly influenced by the...
journal article 2019
document
Zhang, Jian (author), Sokolovskij, R. (author), Chen, Ganhui (author), Zhu, Yumeng (author), Qi, Yongle (author), Lin, Xinpeng (author), Li, Wenmao (author), Zhang, G. (author), Jiang, Yu-Long (author), Yu, Hongyu (author)
S exposure in dry air. A pre...
journal article 2019
document
Arcondoulis, Elias J. G. (author), Ragni, D. (author), Rubio Carpio, A. (author), Avallone, F. (author), Liu, Yu (author), Yang, Yannian (author), Li, Zhiyong (author)
Porous coated cylinders have been shown to reduce the vortex shedding tone and broadband noise of a bare cylinder placed in uniform flow within specific Reynolds number regimes. The processes by which the vortex shedding and thus tone suppression take place are still uncertain despite numerous numerical and experimental studies. It is understood...
conference paper 2019
Searched for:
(1 - 20 of 515)

Pages