Searched for:
(1 - 20 of 91,588)

Pages

document
Molina-Castillo, Francisco Jose (author), Lopez-Nicolas, Carolina (author), de Reuver, G.A. (author)
This study analyzes how learning costs for technologies that lack de facto standards, such as mobile payment, affect user intentions. In addition, we evaluate how the negative effect of learning costs is mediated by perceived functional value and facilitating conditions. Data used in this research was obtained from a study among 463 consumers....
journal article 2020
document
Riemersma, B. (author), Correlje, A.F. (author), Kunneke, R.W. (author)
This paper identifies safety concerns that arise from ongoing technical and institutional changes in the Dutch gas sector. The Netherlands has a well-developed gas infrastructure that primarily transports natural gas, although its constituting features are undergoing major changes. We identify three historical developments, and show how (1)...
journal article 2020
document
Samaniego, Christian Cuba (author), Giordano, G. (author), Franco, Elisa (author)
An important challenge in synthetic biology is the construction of periodic circuits with tunable and predictable period. We propose a general architecture, based on the use of recombinase proteins and negative feedback, to build a molecular device for periodic switching between two distinct regimes; the switching rule depends on known...
journal article 2020
document
Blanchini, Franco (author), Chesi, Graziano (author), Colaneri, Patrizio (author), Giordano, G. (author)
In this letter we show how the problem of assessing structural local stability of BDC-decomposable systems, left open in recent literature, can be solved via convex optimisation. First we give a simple test, based on a sufficient condition, that requires checking the strict co-positivity of a multivariate polynomial. Then we provide a...
journal article 2020
document
Wu, J. (author), Mor, A. R. (author), van Nes, P.V.M. (author), Smit, J.J. (author)
A partial discharge (PD) measuring system has been deployed in order to identify and measure PD in a high voltage (HV) cable joint under impulse and superimposed voltages under laboratory conditions. The challenge is to enable the detection of PD during the impulse conditions. The method of measurement has been investigated by introducing an...
journal article 2020
document
Mor, A. R. (author), Castro Heredia, L.C. (author), Muñoz Muñoz, F.A. (author)
This paper presents a magnetic loop antenna for partial discharge (PD) measurements on gas insulated systems (GIS). The antenna is based on a single shielded loop inserted in the dielectric window of a GIS that measures the PD currents propagating in TEM mode. The paper describes the relevant parameters of the antenna and the antenna...
journal article 2020
document
Lee, W. (author), Kim, Jin Gyun (author), Molenbroek, J.F.M. (author), Goossens, R.H.M. (author), You, Heecheon (author)
A 3D head and face scan data can be usefully applied in the ergonomic design of a wearable product such as an oxygen mask or a virtual reality (VR) headset to support the safety as well as comfort for a certain amount of a target population. This study is aimed to develop analysis and design methods of an ergonomic facial wearable products (e.g....
conference paper 2020
document
Quak, Hans (author), van Duin, Ron (author), Hendriks, B. (author)
Urban consolidation centres (UCCs) have been discussed over many years in city logistics literature. The amount of successful UCCs in the long-run were, and are, very scarce, though. Little is published on the practical issues and experiences of actually running a UCC and offering UCC-services. In the Netherlands, Binnenstadservice (BSS) runs...
conference paper 2019
document
Zuiderwijk-van Eijk, A.M.G. (author), Spiers, Helen (author)
Open data sharing and re-use is currently more common in some academic disciplines than others. Although each discipline has unique challenges and characteristics which can influence data sharing and re-use behavior, it may be possible to gain transferable insight from disciplines where these practices are more common. Several studies of the...
journal article 2019
document
Brown, B. E. (author), Dunne, R. P. (author), Somerfield, P. J. (author), Edwards, A. J. (author), Simons, W.J.F. (author), Phongsuwan, N. (author), Putchim, L. (author), Anderson, L. (author), Naeije, M.C. (author)
Effects of combined rising sea temperature and increasing sea level on coral reefs, both factors associated with global warming, have rarely been addressed. In this ~40 y study of shallow reefs in the eastern Indian Ocean, we show that a rising relative sea level, currently estimated at ~11 mm y−1, has not only promoted coral cover but also has...
journal article 2019
document
Yorio, Patrick L. (author), Edwards, J. M. (author), Hoeneveld, D. (author)
National culture colors nearly every aspect of human behavior (Javidan et al., 2006). Despite this truism, the concept has yet to be integrated into organizational safety culture theory. The purpose of this article is to bring awareness as to how national culture can influence organizational safety culture. We do so by theorizing that the...
review 2019
document
Lepillier, B.P. (author), Daniilidis, Alexandros (author), Doonechaly Gholizadeh, Nima (author), Bruna, P.B.R. (author), Kummerow, Juliane (author), Bruhn, D.F. (author)
The use of the subsurface and the exploitation of subsurface resources require prior knowledge of fluid flow through fracture networks. For nuclear waste disposal, for the enhancement of hydrocarbon recovery from a field, or the development of an enhanced geothermal system (EGS), it is fundamental to constrain the fractures and the fracture...
journal article 2019
document
Krähenmann, T.S. (author), Fischer, S. G. (author), Röösli, M. (author), Ihn, T. (author), Reichl, Christian (author), Wegscheider, Werner (author), Ensslin, K. (author), Gefen, Yuval (author), Meir, Yigal (author)
Quantum Hall edge channels offer an efficient and controllable platform to study quantum transport in one dimension. Such channels are a prospective tool for the efficient transfer of quantum information at the nanoscale, and play a vital role in exposing intriguing physics. Electric current along the edge carries energy and heat leading to...
journal article 2019
document
Kittelmann, J. (author)
The downstream process development for biopharmaceuticals is faced with increasing challenges. A growing market of drug candidates and new molecule families, as well as a rising trend to personalized medicine lead to an increase in market diversity. At the same time more purification techniques and materials become available, resulting in an...
doctoral thesis 2019
document
Rajpal, D. (author), Kassapoglou, C. (author), De Breuker, R. (author)
An analytical model to predict the fatigue life of a composite laminate is formulated. The model calculates stresses in each ply using classical lamination theory, degrades the residual strength using the linear wear-out law and predicts failure based on Tsai Wu failure theory. The cycles to failure are predicted using the updated cycle-by...
journal article 2019
document
Haji Mohammadloo, T. (author), Snellen, M. (author), Simons, D.G. (author), Dierikx, Ben (author), Bicknese, Simon (author)
Methods for gridding multibeam echo sounder (MBES) measurements to equidistant grids are proposed as alternatives to the shallowest measured depth, which is affected by outliers. The approaches considered use a combination of mean and standard deviation of soundings and the regression coefficient from the best fitted plane. These methods...
journal article 2019
document
Zanker, Markus (author), Rook, L. (author), Jannach, Dietmar (author)
Research on understanding, developing and assessing personalisation systems is spread over multiple disciplines and builds on methodologies and findings from several different research fields and traditions, such as Artificial Intelligence (AI), Machine Learning (ML), Human–Computer Interaction (HCI), and User Modelling based on (applied)...
journal article 2019
document
Konijnenberg, A.P. (author)
In this thesis, several phase retrieval methods are discussed. Since the focus will mainly be on theory rather than experiment, the structure has been determined by the similarities and differences of the mathematics of these methods. For example, a distinction is made between non-iterative and iterative methods, and between single-shot...
doctoral thesis 2019
document
Shen, X. J. (author), Li, D. Z. (author), Tang, S. (author), Chen, J. (author), Fang, H. (author), Wang, G. D. (author)
It is still a big challenge to obtain excellent low-temperature toughness for bulk steel materials. Delamination is an effective method to improve low-temperature toughness. In the present study, delamination toughening in a low carbon microalloyed steel plate with elongated and ultrafine-grained microstructure rolled in the dual-phase region...
journal article 2019
document
Ochôa, Pedro (author)
doctoral thesis 2019
Searched for:
(1 - 20 of 91,588)

Pages