Searched for:
(1 - 20 of 503)

Pages

document
Liu, Faqi (author), Yang, Hua (author), Yan, R. (author), Wang, Wei (author)
The behaviour of square steel tube confined reinforced concrete columns after fire exposure was studied experimentally and numerically in this paper. Eighteen stub columns were first heated following the ISO 834 standard fire including both heating and cooling phases, and were subsequently loaded to failure after cooling to ambient temperature....
journal article 2019
document
Apostolidis, P. (author), Liu, X. (author), Erkens, Sandra (author), Scarpas, Athanasios (author)
In epoxy-bitumen systems, temperature contributes to the development of physiochemical and mechanical characteristics during curing (chemical hardening) and at the long-term service (oxidative aging) of pavement structures. Hardening (i.e., chemical or oxidative controlled) is a complex phenomenon in epoxy-modified binders and the in-depth...
journal article 2019
document
Zhang, H. (author), Liu, Y. (author), Wang, Lingen (author), Sun, Fenglian (author), Fan, Xuejun (author), Zhang, G.Q. (author)
The nanoindentation test was conducted in this paper to investigate the indentation hardness, plasticity and initial creep properties of pressure sintered nanosilver joint at various test temperatures. The effects of strain rate on the indentation hardness were first investigated. Then yield stress of nanosilver sintered joint was studied in...
journal article 2019
document
Liu, P. (author)
Solid State Lighting (SSL) develops towards small size, high lumen output, high working temperature, and multi-functional applications. These trends are more desirable in miniaturized LED applications such as retrofit G4 LED devices. Retrofit G4 LEDs were chosen in this work as a technical carrier due to the miniaturized size challenge and high...
doctoral thesis 2019
document
Liu, Mengyao (author), Lin, Jintai (author), Folkert Boersma, K. (author), Pinardi, Gaia (author), Wang, Yang (author), Chimot, J.J. (author), Wagner, Thomas (author), Xie, Pinhua (author), Eskes, Henk (author), More Authors (author)
pollution and impact evaluation. For regions with high aerosol loadings, the retrieval accuracy is greatly affected by whether aerosol optical effects are treated implicitly (as additional effective clouds)...
journal article 2019
document
Liu, H. (author), Pisano, F. (author)
Predicting the cyclic response of soils is still challenging in many geotechnical applications. In this area, the continual efforts on the constitutive modelling of cyclic sand behaviour demand new and reliable dataset for model validation - even more so for loading conditions involving numerous loading cycles ('high-cyclic' loading). This paper...
journal article 2019
document
Liu, Liu (author), Zlatanova, S. (author), Li, Bofeng (author), van Oosterom, P.J.M. (author), Liu, Hua (author), Barton, Jack (author)
An indoor logical network qualitatively represents abstract relationships between indoor spaces, and it can be used for path computation. In this paper, we concentrate on the logical network that does not have notions for metrics. Instead, it relies on the semantics and properties of indoor spaces. A navigation path can be computed by...
journal article 2019
document
Zhang, Chunyan (author), Liu, B. (author), Yu, Baoxing (author), Lu, Xiaopeng (author), Wei, Yong (author), Zhang, Tao (author), Mol, J.M.C. (author), Wang, Fuhui (author)
Surface pretreatment is generally applied before application of protective coatings on Mg alloys, which influences surface microstructure and electrochemical activity of the substrate and has an effect on the coating properties. The effect of various pretreatment processes (sand-blasting, grinding and polishing) on the microstructure and...
journal article 2019
document
Lyu, Maolong (author), Baldi, S. (author), Liu, Zongcheng (author)
This work removes the critical assumptions of continuity, differentiability, and state-independent boundedness, which are typical of compounded disturbances in disturbance observer-based adaptive designs. Crucial in removing such assumptions are a novel observer-based design with state-dependent gain in place of a constant one, and a novel...
journal article 2019
document
Daniel, C.G. (author), Liu, X. (author), Apostolidis, P. (author), Erkens, Sandra (author), Scarpas, Athanasios (author)
The use of synthetic fibres has been reported to enhance the performance of asphalt pavement materials in terms of permanent deformation, fatigue and thermal cracking. However, limited results about the benefits of synthetic fibres in the reinforced warm-mix asphaltic materials, and the exact mechanism of reinforcing the binding part in pavement...
conference paper 2019
document
Yu, T. (author), Liu, Chuanpu (author), Yu, Haiming (author), Blanter, Y.M. (author), Bauer, G.E. (author)
We theoretically investigate the interlayer dipolar and exchange couplings between an array of metallic magnetic nanowires grown on top of an extended ultrathin yttrium iron garnet film. The calculated interlayer dipolar coupling agrees with observed anticrossings [Chen et al., Phys. Rev. Lett. 120, 217202 (2018)PRLTAO0031-900710.1103...
journal article 2019
document
Apostolidis, P. (author), Nahar, Sayeda (author), Liu, X. (author), Lommerts, Bert-Jan (author), Erkens, Sandra (author), Scarpas, Athanasios (author)
The utilization of epoxy-based polymers as bituminous modifiers in developing durable and long-lasting pavement structures have gained increasing interest over the last years showing evidence of high performing materials (1-8). It has been noticed that the addition of epoxy-based modifier into bitumen lead to materials with superior...
conference paper 2019
document
Liu, M. (author), Wang, M. (author), Hoogendoorn, S.P. (author)
Cooperative (automated) vehicles have the potential to enhance traffic efficiency and fuel economy on urban roads, especially at signalized intersections. An optimal control approach to optimize the trajectories of cooperative vehicles at fixed-timing signalized intersections along an arterial is presented. The proposed approach aims to...
journal article 2019
document
Zhang, Youyou (author), Mosallam, Ayman (author), Liu, Yuqing (author), Sun, Yun (author), Xin, H. (author), He, Jun (author)
In this study, flexural behaviors of the pultruded composite laminate were evaluated through experiments and theoretical analysis. Three-point flexural tests were performed for pultruded specimens. The typical failure mode for the longitudinal flexural specimens was local crush on the top surface accompanied with local cracks on the bottom...
journal article 2019
document
Chen, Y. (author), Liu, Yao-Hong (author), Zong, Z. (author), Dijkhuis, Johan (author), Dolmans, Guido (author), Staszewski, R.B. (author), Babaie, M. (author)
In this paper, we propose a method to suppress supply pushing of an LC oscillator such that it may directly operate from a switched-mode dc-dc converter generating fairly large ripples. A ripple replication block (RRB) generates an amplified ripple replica at the gate terminal of the tail current source to stabilize the oscillator's tail...
journal article 2019
document
Liu, Q. (author), Zhao, M. (author), Mytnyk, S. (author), Klemm, B. (author), Zhang, K. (author), Wang, Y. (author), Yan, Dadong (author), Mendes, E. (author), van Esch, J.H. (author)
Hydrogel microparticles are important in materials engineering, but their applications remain limited owing to the difficulties associated with their manipulation. Herein, we report the self-orientation of crescent-shaped hydrogel microparticles and elucidate its mechanism. Additionally, the microparticles were used, for the first time, as...
journal article 2019
document
Liu, Y. (author), Zhang, H. (author), Wang, Lingen (author), Fan, Xuejun (author), Zhang, G.Q. (author), Sun, Fenglian (author)
Purpose: Crack and stress distribution on dies are key issues for the pressure-assisted sintering bonding of power modules. The purpose of this research is to build a relationship among stress distributions, sintering sequences and sintering pressures during the sintering processes. Design/methodology/approach: Three sintering sequences, S(a)...
journal article 2019
document
Liu, K. (author), Ma, M. (author), Wu, Longfei (author), Valenti, M. (author), Cardenas-Morcoso, Drialys (author), Hofmann, Jan P. (author), Bisquert, Juan (author), Gimenez, Sixto (author), Smith, W.A. (author)
was investigated. The uniform planar morphology served as a platform to evaluate the electronic effect isolated from morphological effects while minimizing...
journal article 2019
document
Jiang, Honglan (author), Liu, Leibo (author), Jonker, P.P. (author), Elliott, Duncan G. (author), Lombardi, Fabrizio (author), Han, Jie (author)
In this paper, a fixed-point finite impulse response adaptive filter is proposed using approximate distributed arithmetic (DA) circuits. In this design, the radix-8 Booth algorithm is used to reduce the number of partial products in the DA architecture, although no multiplication is explicitly performed. In addition, the partial products are...
journal article 2019
document
Kan, Xingan (David) (author), Xiao, L. (author), Liu, Hao (author), Wang, M. (author), Schakel, W.J. (author), Lu, Xiao-Yun (author), van Arem, B. (author), Shladover, SE (author), Ferlis, Robert A. (author)
Realistic microscopic traffic simulation is essential for prospective evaluation of the potential impacts of new traffic control strategies. Freeway corridors with interacting bottlenecks and dedicated lanes generate complex traffic flow phenomena and congestion patterns, which are difficult to reproduce with existing microscopic simulation...
journal article 2019
Searched for:
(1 - 20 of 503)

Pages