Searched for:
(1 - 20 of 41)

Pages

document
Boogaard, M.A. (author), Li, Z. (author), Dollevoet, R.P.B.J. (author)
Vibration-based condition monitoring is a powerful tool for remotely assessing the quality of railway components. Due to its design, railway crossings suffer from faster degradation, because of the transition from stock rail onto the needle. Since this is also a repetitive load, a small amount of wear will increase the degradation. Measuring...
journal article 2018
document
Deng, X. (author), Qian, Zhiwei (author), Li, Z. (author), Dollevoet, R.P.B.J. (author)
Rail squats originate from a number of sources, such as corrugations, indentations and welds. A five-year continual field monitoring study was performed on squats induced by corrugations. This study indicated that a small black depression formed at the corrugation under wheel-rail dynamic forces, and then, a primary crack typically initiated...
journal article 2018
document
Nunez Vicencio, Alfredo (author), Popa, Tudor (author), Anghel, Lucian Emmanuel (author), Hendriks, J.M. (author), Moraal, J. (author), Buretea, Laurentiu Dorin (author), Paragreen, Jon (author), Miron, Berbece (author), Gheorghe, Draghici (author), Campean, Mihail (author), Dollevoet, R.P.B.J. (author), Li, Z. (author)
In this paper, we present preliminary results on the development of smart technology solutions for lower density railway lines. The goal is to reach a cost effective inspection and asset management to minimize maintenance
interventions time/cost without dedicated inspection vehicles. The proposed methods include axle box acceleration...
conference paper 2018
document
Nunez Vicencio, Alfredo (author), Popa, Tudor (author), Anghel, Lucian Emmanuel (author), Hendriks, J.M. (author), Moraal, J. (author), Buretea, Laurentiu Dorin (author), Paragreen, Jon (author), Miron, Berbece (author), Gheorghe, Draghici (author), Campean, Mihail (author), Dollevoet, R.P.B.J. (author), Li, Z. (author)
Results on the development of smart technology solutions for lower density
railway lines are presented. The goal is to reach a cost effective inspection and
asset management to minimize maintenance interventions time/cost without
dedicated inspection vehicles. The proposed methods in this paper include: 1) axle box acceleration...
poster 2018
document
Wei, Z. (author), Nunez Vicencio, Alfredo (author), Boogaard, M.A. (author), Dollevoet, R.P.B.J. (author), Li, Z. (author)
In this paper, we present a method for evaluating the performance of railway crossing rails after long-term service. The method includes 1) 3D profile and hardness measurements; 2) finite element simulation of wheel/rail interaction; and 3) numerical prediction of rail degradation. We conducted a case study on a crossing that had been in service...
journal article 2018
document
Yang, Z. (author), Boogaard, M.A. (author), Chen, Rong (author), Dollevoet, R.P.B.J. (author), Li, Z. (author)
This paper presents an analysis of the transient contact solutions of wheel-rail frictional rolling impacts calculated by an explicit finite element model of the wheel-insulated rail joint (IRJ) dynamic interaction. The ability of the model to simulate the dynamic behavior of an IRJ has been validated against a comprehensive field measurement in...
journal article 2018
document
Jamshidi, A. (author), Hajizadeh, S. (author), Su, Z. (author), Naeimi, M. (author), Nunez Vicencio, Alfredo (author), Dollevoet, R.P.B.J. (author), De Schutter, B.H.K. (author), Li, Z. (author)
In this paper, a decision support approach is proposed for condition-based maintenance of rails relying on expert-based systems. The methodology takes into account both the actual conditions of the rails (using axle box acceleration measurements and rail video images) and the prior knowledge of the railway track. The approach provides an...
journal article 2018
document
Yang, Z. (author), Boogaard, M.A. (author), Wei, Z. (author), Liu, Jinzhao (author), Dollevoet, R.P.B.J. (author), Li, Z. (author)
This paper presents an analysis of the transient contact solutions of wheel-rail frictional rolling impacts calculated by an explicit finite element model of the wheel-insulated rail joint (IRJ) dynamic interaction. The ability of the model to simulate the dynamic behavior of an IRJ has been validated against a comprehensive field measurement in...
journal article 2018
document
Nunez Vicencio, Alfredo (author), Jamshidi, A. (author), Wang, H. (author), Hendriks, J.M. (author), Ramirez Fonseca, I. (author), Moraal, J. (author), Dollevoet, R.P.B.J. (author), Li, Z. (author)
In this paper, we propose a methodology based on signal processing and evolutionary multiobjective optimization to facilitate the maintenance decision making of infra-managers in regional railways. Using a train in operation (with passengers onboard), we capture the condition of the rails using Axle Box Acceleration measurements. Then, using...
conference paper 2018
document
Wei, Z. (author), Boogaard, M.A. (author), Nunez Vicencio, Alfredo (author), Li, Z. (author), Dollevoet, R.P.B.J. (author)
This paper describes an approach for characterizing the dynamic behavior of the vehicle/track interaction at railway crossings. In the approach, we integrate in situ axle box acceleration (ABA) measurements with roving-accelerometer hammer tests to evaluate the influence of train speed, train moving direction (facing and trailing directions),...
journal article 2018
document
Nunez Vicencio, Alfredo (author), Hendriks, J.M. (author), Moraal, J. (author), Ramirez Fonseca, I. (author), Dollevoet, R.P.B.J. (author), Li, Z. (author)
In this paper we discuss rail condition monitoring based on axle box acceleration (ABA) measurements. We present three case studies. The first one in The Netherlands, the detection of local defects with different severity levels (squat A, squat B and squat C) is analysed. The second case from the Faurei testing ring in Romania, the detection of...
conference paper 2018
document
Wei, Z. (author), Nunez Vicencio, Alfredo (author), Li, Z. (author), Dollevoet, R.P.B.J. (author)
In this paper, we investigate the capability of an axle box acceleration (ABA) system to evaluate the degradation at railway crossings. For this purpose, information from multiple sensors, namely, ABA signals, 3D rail profiles, Global Positioning System (GPS) and tachometer recordings, was collected from both nominal and degraded crossings....
journal article 2017
document
Jamshidi, A. (author), Nunez Vicencio, Alfredo (author), Dollevoet, R.P.B.J. (author), Li, Z. (author)
This paper presents a condition-based treatment methodology for a type of rail surface defect called squat. The proposed methodology is based on a set of robust and predictive fuzzy key performance indicators. A fuzzy Takagi-Sugeno interval model is used to predict squat evolution for different scenarios over a time horizon. Models including...
journal article 2017
document
Deng, X. (author), Qian, Zhiwei (author), Li, Z. (author), Dollevoet, R.P.B.J. (author)
The half-space assumption has been employed in many solution methods for non-conforming contact problems in elasticity such as the Hertz theory and the Kalker's variational theory. It is generally believed that to guarantee acceptable accuracy in these half-space-based methods, the characteristic size (twice length of one semi-axis) of the...
journal article 2017
document
Naeimi, M. (author), Li, Z. (author), Petrov, R.H. (author), Sietsma, J. (author), Dollevoet, R.P.B.J. (author)
A new downscale test rig is developed for investigating the contact between the wheel and rail under impact-like loading conditions. This paper presents the development process of the setup, including review and synthesis of the potential experimental techniques, followed by scalability, mechanical and operational analysis of the new setup. The...
journal article 2017
document
Li, S. (author), Li, Z. (author), Nunez Vicencio, Alfredo (author), Dollevoet, R.P.B.J. (author)
A three-dimensional (3D) finite element (FE) dynamic frictional rolling contact model is presented for the study of short pitch corrugation that considers direct and instantaneous coupling between the contact mechanics and the structural dynamics in a vehicle-track system. In this study, we examine the system responses in terms of vibration...
journal article 2017
document
Jamshidi, A. (author), Faghih Roohi, S. (author), Hajizadeh, S. (author), Nunez Vicencio, Alfredo (author), Babuska, R. (author), Dollevoet, R.P.B.J. (author), Li, Z. (author), De Schutter, B.H.K. (author)
Railway infrastructure monitoring is a vital task to ensure rail transportation safety. A rail failure could result in not only a considerable impact on train delays and maintenance costs, but also on safety of passengers. In this article, the aim is to assess the risk of a rail failure by analyzing a type of rail surface defect called squats...
journal article 2017
document
Naeimi, M. (author), Li, Z. (author), Dollevoet, R.P.B.J. (author)
conference paper 2017
document
Nunez Vicencio, Alfredo (author), Hendriks, J.M. (author), Li, Z. (author), Dollevoet, R.P.B.J. (author)
La industria ferroviaria a nivel mundial necesita de una gran cantidad de nuevos
profesionales, capaces de resolver los crecientes desafíos que este modo presenta. Siendo una industria por lo general conservadora, atraer a las y los mejores no es tarea fácil. En este resumen, se discuten algunos desafíos del mundo ferroviario y se presenta...
conference paper 2017
document
Molodova, M. (author), Oregui Echeverria-Berreyarza, M. (author), Nunez Vicencio, Alfredo (author), Li, Z. (author), Dollevoet, R.P.B.J. (author)
This paper presents a health condition monitoring system for insulated rail joints (IRJs) based on axle box acceleration (ABA) measurements. The ABA signals from all the wheels of the measuring train are processed to extract those characteristics that better represent the quality of the IRJ. Then, different indicators are used for damage...
journal article 2016
Searched for:
(1 - 20 of 41)

Pages