Ground vibration induced by high speed trains on an embankment with pile-board foundation: Modelling and validation with in situ tests

To investigate the train-induced ground vibration, an explicit time-domain, three dimensional (3D) finite element (FE) model is developed. The train, track, embankment, pile-board structure and nearby ground soils are all fully coupled in this model. The complex geometries involving the track components and pile-board structure are all...

Comparisons between beam and continuum models for modelling wheel-rail impact at a singular rail surface defect

A singular rail or wheel surface irregularity, such as a squat, insulation joint or wheel flat, can cause large wheelrail impact force. Both the magnitude and frequency content of the impact force need to be correctly modelledbecause they are closely related to the formation, deterioration and detection of such irregularities. In this paper,we...

Multi-criteria evaluation of wheel/rail degradation at railway crossings

This study evaluates the degradation of wheels and rails at railway crossings. The evaluation method is composed of 1) finite element simulation of dynamic wheel/crossing interaction and 2) multi-criteria analysis of wheel/rail degradation in terms of yield behavior, rolling contact fatigue (RCF) and wear. With the aid of this method, we...

Method for evaluating the performance of railway crossing rails after long-term service

In this paper, we present a method for evaluating the performance of railway crossing rails after long-term service. The method includes 1) 3D profile and hardness measurements; 2) finite element simulation of wheel/rail interaction; and 3) numerical prediction of rail degradation. We conducted a case study on a crossing that had been in service...

An integrated approach for characterizing the dynamic behaviour of wheel-rail interaction at crossings

This paper describes an approach for characterizing the dynamic behavior of the vehicle/track interaction at railway crossings. In the approach, we integrate in situ axle box acceleration (ABA) measurements with roving-accelerometer hammer tests to evaluate the influence of train speed, train moving direction (facing and trailing directions),...

Numerical study of wheel-rail impact contact solutions at an insulated rail joint

This paper presents an analysis of the transient contact solutions of wheel-rail frictional rolling impacts calculated by an explicit finite element model of the wheel-insulated rail joint (IRJ) dynamic interaction. The ability of the model to simulate the dynamic behavior of an IRJ has been validated against a comprehensive field measurement in...

Comparison of vehicle-track interaction models to simulate vertical wheel/rail impact contact

This study compares various assumptions in different models to assess their capabilities to model vehicle-track interactions up to 2 kHz at a single rail-top defect. Field measurement data are used to evaluate discrepancies. The characteristics of contact force and axle-box acceleration (ABA) are first identified and qualitatively correlated...

Evaluating degradation at railway crossings using axle box acceleration measurements

In this paper, we investigate the capability of an axle box acceleration (ABA) system to evaluate the degradation at railway crossings. For this purpose, information from multiple sensors, namely, ABA signals, 3D rail profiles, Global Positioning System (GPS) and tachometer recordings, was collected from both nominal and degraded crossings....

Effects of wheelset flexibility on the simulation of vehicle-track interaction at crossings

Though numerical models based on multi-body dynamics (MBD) are often used to simulate the vehicle-track interaction at crossing impact, their relative capabilities and accuracy were not discussed. This paper aims to investigate the influence of wheelset flexibility on the result of crossing impact simulation in the frequency range 0–500 Hz. Two...