A Thermoelectric Energy Harvesting System Assisted by A Piezoelectric Transducer Achieving 10-mV Cold-Startup and 82.7% Peak Efficiency

This article presents a 10mV-startup-voltage thermoelectric energy harvesting system, assisted by a piezoelectric generator (PEG) as a cold starter. It exploits the fact that when a thermoelectric energy harvesting system is implemented in a place where kinetic energy is also present, the PEG starter can provide a clock signal to start the...

Numerical investigation on the Thermal-hydraulic performance of the modified channel supercritical CO₂ printed circuit heat exchanger

Printed circuit heat exchangers (PCHE) are designed to improve heat recovery and energy saving in supercritical CO₂ (S-CO₂) power cycles. In the current study, a modified channel PCHE is proposed based on the regular straight channel and a zigzag channel. The thermal–hydraulic performance of four different types of PCHE...

Investigation of the hydration properties of cement with EDTA by alternative current impedance spectroscopy

Alternative current impedance spectroscopy (ACIS) is a promising non-destructive testing method to monitor long-term change and assess the durability of concrete. This study investigates the influences of Ethylene Diamine Tetraacetic Acid (EDTA) on the hydration of hardening cement by ACIS. It is found that EDTA retards the early-age...

An Ensemble Learning Framework for Vehicle Trajectory Prediction in Interactive Scenarios

Precisely modeling interactions and accurately predicting trajectories of surrounding vehicles are essential to the decision-making and path-planning of intelligent vehicles. This paper proposes a novel framework based on ensemble learning to improve the performance of trajectory predictions in interactive scenarios. The framework is termed...

Investigating the High- And Low-Temperature Performance of Warm Crumb Rubber-Modified Bituminous Binders Using Rheological Tests

Rubberized asphaltic materials have been frequently combined with warm-mix asphalt technologies to tackle the issues of high energy consumptions and emissions during construction. Effective and accurate characterization of binder properties is conducive to the improvement of long-term pavement performance. The current study aims to quantify...

Effect of filler on performance of porous asphalt pavement using multiscale finite element method

Porous asphalt (PA) pavements are widely employed in areas with wet climates. As particle enhancement inclusions in asphalt mastic, mineral fillers play essential roles in improving the performance of PA pavements. This study developed a coupled multiscale finite element (FE) model, involving the mesostructure of PA mixture and PA pavement....

A New Divergence Method to Quantify Methane Emissions Using Observations of Sentinel-5P TROPOMI

We present a new divergence method to estimated methane (CH₄) emissions from satellite observed mean mixing ratio of methane (XCH₄) by deriving the regional enhancement of XCH₄ in the Planetary Boundary Layer (PBL). The applicability is proven by comparing the estimated emissions with its known emission...

Effect of ethanol concentration on methane hydrate decomposition: MD simulation insights

The controllability of mining is a key factor affecting the commercial application of methane hydrates, and the addition of chemical additives can significantly accelerate the mining process. However, the effect of additive concentration on hydrate decomposition is not yet well understood. In this study, we systematically investigate the...

The hydro-mechanical interaction in novel polyurethane-bound pervious pavement by considering the saturation states in unbound granular base course

The pore-water pressure generated by intermittent dynamic vehicle loading under various saturation states is recognized as a critical factor influencing the behaviour of permeable pavement structures, especially the behaviour of UGB layer. However, the underlying mechanisms of hydro-mechanical interaction in the UGB layer and the influence on...

New innovations in pavement materials and engineering: A review on pavement engineering research 2021

Sustainable and resilient pavement infrastructure is critical for current economic and environmental challenges. In the past 10 years, the pavement infrastructure strongly supports the rapid development of the global social economy. New theories, new methods, new technologies and new materials related to pavement engineering are emerging....

Revealing High Na-Content P2-Type Layered Oxides as Advanced Sodium-Ion Cathodes

Layered Na-based oxides with the general composition of NaxTMO2 (TM: transition metal) have attracted significant attention for their high compositional diversity that provides tunable electrochemical performance for electrodes in sodium-ion batteries. The various compositions bring forward complex structural chemistry that is decisive for...

Fatigue performance of long-term aged crumb rubber modified bitumen containing warm-mix additives

Recently warm mix asphalt (WMA) technologies have been introduced to rubberized asphalt mixtures to decrease the required construction temperatures and to alleviate the hazardous gas emissions. Rubberized asphalt pavements combining with WMA have the potential to improve the long-term pavement performance. This study aims to investigate the...

In-situ and numerical investigation on the dynamic response of unbounded granular material in permeable pavement

Permeable pavements have been widely used as an effective means to improve hydrological characteristics and the ecology of the urban environment. This study aims to investigate the response of fully permeable pavement (FPP) subjected to dynamic loading under dry and saturated conditions. A full-scale test track topped with polyurethane bound...

Accelerated healing in asphalt concrete via laboratory microwave heating

Self-healing of asphalt concrete (AC) is highly dependent on temperature, and its healing capacity increases with elevated temperatures. The main objective of this study is to investigate the effect of microwave heating on promotion of self-healing in AC. With this purpose, two types of AC specimens (neat AC without additives and conductive...

Review of the recent progress on GaN-based vertical power Schottky barrier diodes (SBDs)

Gallium nitride (GaN)-based vertical power Schottky barrier diode (SBD) has demonstrated outstanding features in high-frequency and high-power applications. This paper reviews recent progress on GaN-based vertical power SBDs, including the following sections. First, the benchmark for GaN vertical SBDs with different substrates (Si, sapphire, and...

Influence of surface pretreatment on phosphate conversion coating on AZ91 Mg alloy

Surface pretreatment is generally applied before application of protective coatings on Mg alloys, which influences surface microstructure and electrochemical activity of the substrate and has an effect on the coating properties. The effect of various pretreatment processes (sand-blasting, grinding and polishing) on the microstructure and...

Cross-Comparison and Calibration of Two Microscopic Traffic Simulation Models for Complex Freeway Corridors with Dedicated Lanes

Realistic microscopic traffic simulation is essential for prospective evaluation of the potential impacts of new traffic control strategies. Freeway corridors with interacting bottlenecks and dedicated lanes generate complex traffic flow phenomena and congestion patterns, which are difficult to reproduce with existing microscopic simulation...

The agent-construction system for procuring mega projects in China

While heated discussions have been directed towards various innovative procurement systems such as PPP, PFI, and BOT that carry the great expectation to help materialise the projects and deliver value to the society, a procurement system named agent-construction system (ACS or in Chinese Dai Jian Zhi) is being prevailing in China’s public...