Searched for: +
(1 - 20 of 24)

Pages

document
van Oostrum, Matthijs (author), Liu, Jiayao (author), Li, Yishiqin (author), Hoek, Ruben (author), Yang, Yidong (author), He, Zhujun (author), Buysschaert, Axel (author), Xiao, Yazhi (author), Peng, Jiping (author), van Eijk, Saskia (author), Yang, Qiao (author)
This publication is in response to the call of 2017 Bi-City Biennale of Urbanism\Architecture (Shenzhen) (UABB) “Cities, Grow in Difference”, from the perspective of urbanism: the synthesis of factors that collectively determine the spatial use of the city. <br/>This atlas is based on master graduation theses of Delft University of Technology ...
book 2017
document
Zhang, Z. (author), Xiao, Y. (author), Yang, Y. (author), Boom, R. (author), Voncken, J.H.L. (author)
Vitrification is considered to be an attractive technology for bottom ash treatment because it destroys the hazardous organics, contributes to immobilization of the heavy metals, and additionally it reduces drastically the volume. The main components of the vitrified bottom ash slag are SiO2 , CaO, Al2 O3 , Fe2 O3 , Na 2 O and MgO, and the...
conference paper 2009
document
Xiao, A. (author), Wang, L.G. (author), Van Driel, W.D. (author), Van Der Sluis, O. (author), Yang, D.G. (author), Ernst, L.J. (author), Zhang, G.Q. (author)
conference paper 2007
document
Zhu, G. (author), Xiao, Y. (author), Yang, Y. (author), Wang, J. (author), Sun, B. (author), Boom, R. (author)
Recycling of aluminum alloy scrap obtained from delaminated fibre metal laminates (FMLs) was studied through high temperature refining in the presence of a salt flux. The aluminum alloy scrap contains approximately mass fraction w(Cu) = 4.4%, w(Mg) = 1.1% and w(Mn) = 0.6% (2024 aluminum alloy). The main objective of this research is to obtain a...
journal article 2012
document
Zhao, Wenhua (author), Yang, J. (author), Hu, Z. (author), Xiao, L. (author), Tao, L. (author)
journal article 2014
document
Xiao, Longfei (author), Tao, Longbin (author), Yang, Jianmin (author), Li, Xin (author)
journal article 2014
document
Zhu, G. (author), Xiao, Y. (author), Yang, Y. (author), Wang, J. (author), Sun, B. (author), Boom, R. (author)
GLARE (glass fibre/epoxy reinforced aluminum laminate) is a member of the fiber metal laminate (FML) family, and is built up of alternating metal and fiber layers. About 500m2 GLARE is employed in each Airbus A380 because of the superior mechanical properties over the monolithic aluminum alloys, such as weight reduction, improved damage...
journal article 2012
document
Yang, Hezhen (author), Xiao, Fei (author)
journal article 2014
document
Zeng, L.J. (author), Ma, C. (author), Yang, H.X. (author), Xiao, R.J. (author), Li, J.Q. (author), Jansen, J. (author)
journal article 2008
document
Liu, Gang (author), Du, Zhao (author), Xiao, Tian (author), Guo, Junfei (author), Lu, Liu (author), Yang, Xiaohu (author), Hooman, K. (author)
Solar energy, as a kind of renewable energy, offers a large reserve to be harvested at a reasonably low cost for engineering applications. To decouple the temporal and spatial relevance of the continuous energy supply of solar energy, latent heat thermal energy storage can deal with this problem at different temperatures. Aiming to improve...
journal article 2022
document
Xiao, Tian (author), Zhang, Qiaoling (author), Yang, Xiaohu (author), Hooman, K. (author), Li, Guodong (author)
It is indicated that the solder joint of the metal fibrous materials is a critical factor impacting the heat conduction. To reveal the mechanism by which solder joint sizes, solder joint skips, solder flux materials, and filling media affect the thermal conductivity of fibres, pore-scale numerical simulation is employed to study the thermal...
journal article 2023
document
Zheng, Zhenqi (author), Xiao, Xiongwu (author), Zhong, Zhi Chao (author), Zang, Y. (author), Yang, Nan (author), Tu, Jianguang (author), Li, Deren (author)
Digital Elevation Model (DEM)-based mountain vertex extraction is one of the most useful DEM applications, providing important information to properly characterize topographic features. Current vertex-extraction techniques have considerable limitations, such as yielding low-accuracy results and generating false mountain vertices. To overcome...
journal article 2021
document
Feng, Xiangdong (author), Luo, Yuxuan (author), Cai, Tianyi (author), Xuan, Yangfan (author), Zhang, Yunshan (author), Shen, Yili (author), Yang, Changgui (author), Xiao, Qijing (author), Du, S. (author), Zhao, Bo (author)
The growing trend of the Internet of Things (IoT) involves trillions of sensors in various applications. An extensive array of parameters need to be gathered concurrently with high-precision, low-cost, and low-power sensor nodes, such as resistive (R) and capacitive (C) sensors. Single-chip channel fusion can be an effective solution, while...
journal article 2024
document
Zhang, Xinqi (author), Shi, Jihao (author), Huang, Xinyan (author), Xiao, Fu (author), Yang, M. (author), Huang, Jiawei (author), Yin, Xiaokang (author), Sohail Usmani, Asif (author), Chen, Guoming (author)
Deep learning has been widely applied to automated leakage detection and location of natural gas pipe networks. Prevalent deep learning approaches do not consider the spatial dependency of sensors, which limits leakage detection performance. Graph deep learning is a promising alternative to prevailing approaches as it can model spatial...
journal article 2023
document
Chen, Chao (author), Chen, Hang (author), Mo, Li (author), Xiao, Shenbin (author), Li, Changjun (author), Yang, M. (author), Reniers, G.L.L.M.E. (author)
Fire-induced domino effect is one of the main threats to hazardous material storage tanks, and many attempts have been conducted to assess the vulnerability of storage tanks exposed to fire to evaluate domino effect risk. However, past research ignored the influence of wind load on the thermal buckling behavior of storage tanks exposed to...
journal article 2024
document
Xiao, Jing (author), Wei, Qi-Qin (author), Yang, Daoguo (author), Zhang, Ping (author), He, Ning (author), Zhang, Kouchi (author), Ren, Tian-Ling (author), Chen, Xian-Ping (author)
The emerging field of nanophotonics requires plasmonic devices to be fully compatible with semiconductor fabrication techniques. However, very few feasible practical structures exist at present. Here, we propose a CMOS-compatible hybrid plasmonic slot waveguide (HPSW) with enhanced field confinement. Our simulation results show that the HPSW...
journal article 2016
document
Xu, L. (author), Xiao, Y (author), Xu, Q (author), Song, Qiushi (author), Yang, Y. (author)
In this work, the electrochemical behavior of zirconium was studied on an inert molybdenum electrode at 550 °C in a LiCl-KCl-K<sub>2</sub>ZrF<sub>6</sub> molten salt system, which is considered as an ideal electrolyte for the zirconium electrorefining process. Several transient electrochemical techniques were used such as cyclic voltammetry,...
journal article 2017
document
Yun, Minghui (author), Cai, Miao (author), Yang, Daoguo (author), Yang, Yiren (author), Xiao, Jing (author), Zhang, Kouchi (author)
Bond wire damage is one of the most common failure modes of metal-oxide semiconductor field-effect transistor (MOSFET) power devices in wire-welded packaging. This paper proposes a novel bond wire damage detection approach based on two-port network measurement by identifying the MOSFET source parasitic inductance (LS). Numerical calculation...
journal article 2022
document
Xiao, Jing (author), Wei, Qi-Qin (author), Yang, Duo Guo (author), Zhang, Ping (author), He, Ning (author), Zhang, Kouchi (author), Chen, Xian Ping (author)
The slot waveguide has attracted considerable attention because of its ability to confine and guide electromagnetic energy at the subwavelength scale beyond the diffraction limit. We propose a novel terahertz slot waveguide structure to achieve a better tradeoff between propagation length and field confinement capacity, the novel waveguide...
journal article 2017
document
Yun, Minghui (author), Yang, Daoguo (author), He, Siliang (author), Cai, Miao (author), Xiao, Jing (author), Zhang, Kailin (author), Zhang, Kouchi (author)
With the emerging wide bandgap (WBG) semiconductor development, the increasing power density and efficiency of power electronic converters may cause more switching oscillation, electromagnetic interference noise, and additional power loss, further increasing the probability of device failure. Therefore, determining and quantifying the failure...
journal article 2022
Searched for: +
(1 - 20 of 24)

Pages