A 200Gb/s PAM-4 Transmitter with Hybrid Sub-Sampling PLL in 28nm CMOS Technology

This paper presents a complete 200Gb/s PAM-4 transmitter (TX) in 28nm CMOS technology. The transmitter features a hybrid sub-sampling PLL (SSPLL) with a delta-sigma (?S) modulator, clock distribution network with flexible timing control, and data path with a hybrid 5-tap Feed-Forward Equalizer (FFE) and T-coil for bandwidth extension. The...

A Ring-Oscillator Sub-Sampling PLL With Hybrid Loop Using Generator-Based Design Flow

We present a ring-oscillator-based sub-sampling phase-locked loop (PLL) using a generator-based design flow. A hybrid loop with a delta-sigma ($\Delta \Sigma$) modulator is applied to reduce the loop filter (LF) area and the control ripple. The generator automatically produces the ring oscillator and PLL to meet the provided specifications. The...

A 5800-μm² Resistor-Based Temperature Sensor with a One-Point Trimmed Inaccuracy of ±1.2 °c (3σ) from -50 °c to 105 °c in 65-nm CMOS

This letter describes a compact resistor-based temperature sensor intended for the thermal monitoring of microprocessors and DRAMs. It consists of an RC poly phase filter (PPF) that is read out by a frequency-locked loop (FLL) based on a dual zero-crossing (ZC) detection scheme. The sensor,fabricated in 65-nm CMOS,occupies 5800 μm²...

A 0.53pJK27000μm2resistor-based temperature sensor with an inaccuracy of ±0.35°C (3σ) in 65nm CMOS

In microprocessors and DRAMs, on-chip temperature sensors are essential components, ensuring reliability by monitoring thermal gradients and hot spots. Such sensors must be as small as possible, since multiple sensors are required for dense thermal monitoring. However, conventional BJT-based temperature sensors are not compatible with the sub...

3D scan to product design: Methods, techniques, and cases

3D scanning technology has derived great opportunities for ergonomic product designs. This paper is aimed to introduce various research cases and methods based on 3D scanning have conducted by an ergonomics laboratory in South Korea. Sizing systems and representative 3D models developed on anthropometric measurements and 3D scan images with...

Evaporation-induced flows in confined droplets of diluted aqueous NaCl solution

The flows in a naturally evaporating liquid droplet confined by two flat plates were investigated experimentally. A diluted sodium-chloride (NaCl) aqueous solution was used to form the confined droplets. The evaporation of water at the free surface of the droplet built up a concentration gradient inside the solution, which induced a natural...