Searched for:
(1 - 20 of 30)

Pages

document
Wang, H. (author), Liu, Zhigang (author), Nunez Vicencio, A.A. (author), Dollevoet, R.P.B.J. (author)
The condition-based maintenance of high-speed railway catenary is an important task to ensure the continuous availability of train power supply. To improve the condition monitoring of catenary, this paper presents a novel scheme to detect catenary local irregularities using pantograph head acceleration measurements. First, a series of...
journal article 2019
document
Deng, X. (author), Li, Z. (author), Qian, Z. (author), Zhai, Wanming (author), Xiao, Qian (author), Dollevoet, R.P.B.J. (author)
Weld-induced squats are a major damage type in high-speed railways as well as in conventional railways. They incur high maintenance costs and endanger operational safety. This paper first presents and analyzes five-year continual field monitoring observations and measurements of squats at rail welds. A hypothesis of the formation and development...
journal article 2019
document
Hajizad, O. (author), Kumar, A. (author), Li, Z. (author), Petrov, R.H. (author), Sietsma, J. (author), Dollevoet, R.P.B.J. (author)
Wheel–rail contact creates high stresses in both rails and wheels, which can lead to different damage, such as plastic deformation, wear and rolling contact fatigue (RCF). It is important to use high-quality steels that are resistant to these damages. Mechanical properties and failure of steels are determined by various microstructural...
journal article 2019
document
Boogaard, M.A. (author), Li, Z. (author), Dollevoet, R.P.B.J. (author)
Vibration-based condition monitoring is a powerful tool for remotely assessing the quality of railway components. Due to its design, railway crossings suffer from faster degradation, because of the transition from stock rail onto the needle. Since this is also a repetitive load, a small amount of wear will increase the degradation. Measuring...
journal article 2018
document
Deng, X. (author), Qian, Z. (author), Li, Z. (author), Dollevoet, R.P.B.J. (author)
Rail squats originate from a number of sources, such as corrugations, indentations and welds. A five-year continual field monitoring study was performed on squats induced by corrugations. This study indicated that a small black depression formed at the corrugation under wheel-rail dynamic forces, and then, a primary crack typically initiated...
journal article 2018
document
Chang, L. (author), Dollevoet, R.P.B.J. (author), Hanssen, R.F. (author)
Satellite radar interferometry (InSAR) is an emerging technique to monitor the stability and health of line-infrastructure assets, such as railways, dams, and pipelines. However, InSAR is an opportunistic approach as the location and occurrence of its measurements (coherent scatterers) cannot be guaranteed, and the quality of the InSAR...
journal article 2018
document
Jamshidi, A. (author), Hajizadeh, S. (author), Su, Z. (author), Naeimi, M. (author), Nunez Vicencio, A.A. (author), Dollevoet, R.P.B.J. (author), De Schutter, B.H.K. (author), Li, Z. (author)
In this paper, a decision support approach is proposed for condition-based maintenance of rails relying on expert-based systems. The methodology takes into account both the actual conditions of the rails (using axle box acceleration measurements and rail video images) and the prior knowledge of the railway track. The approach provides an...
journal article 2018
document
Wei, Z. (author), Nunez Vicencio, A.A. (author), Boogaard, M.A. (author), Dollevoet, R.P.B.J. (author), Li, Z. (author)
In this paper, we present a method for evaluating the performance of railway crossing rails after long-term service. The method includes 1) 3D profile and hardness measurements; 2) finite element simulation of wheel/rail interaction; and 3) numerical prediction of rail degradation. We conducted a case study on a crossing that had been in service...
journal article 2018
document
Wei, Z. (author), Boogaard, M.A. (author), Nunez Vicencio, A.A. (author), Li, Z. (author), Dollevoet, R.P.B.J. (author)
This paper describes an approach for characterizing the dynamic behavior of the vehicle/track interaction at railway crossings. In the approach, we integrate in situ axle box acceleration (ABA) measurements with roving-accelerometer hammer tests to evaluate the influence of train speed, train moving direction (facing and trailing directions),...
journal article 2018
document
Dollevoet, Twan (author), van Essen, J.T. (author), Glorie, Kristiaan M. (author)
In order to perform medical surgeries, hospitals keep large inventories of surgical instruments. These instruments need to be sterilized before each surgery. Typically the instruments are kept in trays. Multiple trays may be required for a single surgery, while a single tray may contain instruments that are required for multiple surgical...
journal article 2018
document
Yang, Z. (author), Boogaard, M.A. (author), Wei, Z. (author), Liu, Jinzhao (author), Dollevoet, R.P.B.J. (author), Li, Z. (author)
This paper presents an analysis of the transient contact solutions of wheel-rail frictional rolling impacts calculated by an explicit finite element model of the wheel-insulated rail joint (IRJ) dynamic interaction. The ability of the model to simulate the dynamic behavior of an IRJ has been validated against a comprehensive field measurement in...
journal article 2018
document
Yang, Z. (author), Boogaard, M.A. (author), Chen, Rong (author), Dollevoet, R.P.B.J. (author), Li, Z. (author)
This paper presents an analysis of the transient contact solutions of wheel-rail frictional rolling impacts calculated by an explicit finite element model of the wheel-insulated rail joint (IRJ) dynamic interaction. The ability of the model to simulate the dynamic behavior of an IRJ has been validated against a comprehensive field measurement in...
journal article 2018
document
Wang, H. (author), Nunez Vicencio, A.A. (author), Liu, Zhigang (author), Song, Yang (author), Duan, Fuchuan (author), Dollevoet, R.P.B.J. (author)
This paper studies the evolvement of the wear irregularity of contact wire using wire thickness data measured yearly from a section of railway catenary. The power spectral density and time–frequency representation based on the wavelet transform are employed for data analysis, with an emphasis on local wear irregularities that are crucial for...
journal article 2017
document
Wei, Z. (author), Nunez Vicencio, A.A. (author), Li, Z. (author), Dollevoet, R.P.B.J. (author)
In this paper, we investigate the capability of an axle box acceleration (ABA) system to evaluate the degradation at railway crossings. For this purpose, information from multiple sensors, namely, ABA signals, 3D rail profiles, Global Positioning System (GPS) and tachometer recordings, was collected from both nominal and degraded crossings....
journal article 2017
document
Jamshidi, A. (author), Nunez Vicencio, A.A. (author), Dollevoet, R.P.B.J. (author), Li, Z. (author)
This paper presents a condition-based treatment methodology for a type of rail surface defect called squat. The proposed methodology is based on a set of robust and predictive fuzzy key performance indicators. A fuzzy Takagi-Sugeno interval model is used to predict squat evolution for different scenarios over a time horizon. Models including...
journal article 2017
document
Deng, X. (author), Qian, Z. (author), Li, Z. (author), Dollevoet, R.P.B.J. (author)
The half-space assumption has been employed in many solution methods for non-conforming contact problems in elasticity such as the Hertz theory and the Kalker's variational theory. It is generally believed that to guarantee acceptable accuracy in these half-space-based methods, the characteristic size (twice length of one semi-axis) of the...
journal article 2017
document
Jamshidi, A. (author), Faghih Roohi, S. (author), Hajizadeh, S. (author), Nunez Vicencio, A.A. (author), Babuska, R. (author), Dollevoet, R.P.B.J. (author), Li, Z. (author), De Schutter, B.H.K. (author)
Railway infrastructure monitoring is a vital task to ensure rail transportation safety. A rail failure could result in not only a considerable impact on train delays and maintenance costs, but also on safety of passengers. In this article, the aim is to assess the risk of a rail failure by analyzing a type of rail surface defect called squats...
journal article 2017
document
Naeimi, M. (author), Li, Z. (author), Petrov, R.H. (author), Sietsma, J. (author), Dollevoet, R.P.B.J. (author)
A new downscale test rig is developed for investigating the contact between the wheel and rail under impact-like loading conditions. This paper presents the development process of the setup, including review and synthesis of the potential experimental techniques, followed by scalability, mechanical and operational analysis of the new setup. The...
journal article 2017
document
Li, S. (author), Li, Z. (author), Nunez Vicencio, A.A. (author), Dollevoet, R.P.B.J. (author)
A three-dimensional (3D) finite element (FE) dynamic frictional rolling contact model is presented for the study of short pitch corrugation that considers direct and instantaneous coupling between the contact mechanics and the structural dynamics in a vehicle-track system. In this study, we examine the system responses in terms of vibration...
journal article 2017
document
Molodova, M. (author), Oregui Echeverria-Berreyarza, M. (author), Nunez Vicencio, A.A. (author), Li, Z. (author), Dollevoet, R.P.B.J. (author)
This paper presents a health condition monitoring system for insulated rail joints (IRJs) based on axle box acceleration (ABA) measurements. The ABA signals from all the wheels of the measuring train are processed to extract those characteristics that better represent the quality of the IRJ. Then, different indicators are used for damage...
journal article 2016
Searched for:
(1 - 20 of 30)

Pages