Behavior of Engineered Cementitious Composites (ECCs) Subjected to Coupled Sustained Flexural Load and Salt Frost

The performance of engineered cementitious composites (ECCs) under coupled salt freezing and loaded conditions is important for its application on the transportation infrastructure. However, in most of the studies, the specimens were generally loaded prior to the freezing. The influence of sustained load was merely considered. To this end,...

Distributed Adaptive Fixed-Time Fault-Tolerant Control for Multiple 6-DOF UAVs With Full-State Constraints Guarantee

In contrast with most existing results concerning unmanned aerial vehicles (UAVs) wherein material points or only attitude/longitudinal dynamics are considered, this article proposes a distributed fixed-time fault-tolerant control methodology for networked fixed-wing UAVs whose dynamics are six-degree-of-freedom with twelf-state-variables...

Evaluating the strength of grade 10.9 bolts subject to multiaxial loading using the micromechanical failure index: MCEPS

Bolted joints in steel structures are generally subject to combined actions. The research on ultimate capacity of bolted joints under combined tension and shear actions, twin shear actions, and combined tension-twin shear actions is relatively limited. The aim of this paper is to calibrate the fracture locus of grade 10.9 bolts using the...

Research Progress on Convective Heat Transfer Characteristics of Supercritical Fluids in Curved Tube

Because of their compact structure, ease of processing and higher heat transfer coefficient, curved-tube heat exchangers are widely applied in various industry applications, such as nuclear power systems, solar-powered engineering, aircraft engine cooling systems and refrigeration and cryogenic systems. Accurate knowledge about the heat transfer...

Sintering mechanism of Ag nanoparticle-nanoflake: a molecular dynamics simulation

This paper studied the behaviors of sintering between Ag nanoparticle (NP) and nanoflake (NF) in the same size by molecular dynamics simulation. Before the sintering simulation, the melting simulation of NF was carried out to calculate the melting points of NFs and investigate the thermostability of NF. The Lindemann index and potential...

A new installation technology of large diameter deeply-buried caissons: Practical application and observed performance

The development of installation technologies of open caissons has been lagging behind increasingly complex construction conditions. For such purpose, a new installation technology of large diameter deeply-buried (LDDB) open caissons has been developed and then used for construction of twin LDDB caissons into undrained ground with stiff soils...

Conductive Co-based metal organic framework nanostructures for excellent potassium- and lithium-ion storage: Kinetics and mechanism studies

Thanks to the low cost and earth's abundant potassium resources, potassium ion batteries (PIBs) have attracted much interest as alternative energy storage devices. However, there is still a great challenge to develop suitable anode materials for PIBs with high specific capacity, fast charge/discharge and stable ion storage. Nowadays,...

Thickness-Independent Capacitive Performance of Holey Ti₃C₂T_x Film Prepared through a Mild Oxidation Strategy

The Ti₃C₂T_x film with metallic conductivity and high pseudo-capacitance holds profound promise in flexible high-rate supercapacitors. However, the restacking of Ti₃C₂T_x sheets hinders ion access to thick film electrodes. Herein, a mild yet green route has been developed to...

Optimization of mesa etch for a quasi-vertical gan schottky barrier diode (Sbd) by inductively coupled plasma (icp) and device characteristics

The optimization of mesa etch for a quasi-vertical gallium nitride (GaN) Schottky barrier diode (SBD) by inductively coupled plasma (ICP) etching was comprehensively investigated in this work, including selection of the etching mask, ICP power, radio frequency (RF) power, ratio of mixed gas, flow rate, and chamber pressure, etc. In particular...

A high responsivity and controllable recovery ultraviolet detector based on a WO₃gate AlGaN/GaN heterostructure with an integrated micro-heater

A high responsivity and controllable recovery ultraviolet (UV) photodetector based on a tungsten oxide (WO₃) gate AlGaN/GaN heterostructure with an integrated micro-heater is reported for the first time. The WO₃nanolayer was deposited by physical vapor deposition (PVD) for deep UV absorption and the micro-heater was...

Microstructure and hardness of SAC305 and SAC305-0.3Ni solder on Cu, high temperature treated Cu, and graphene-coated Cu substrates

In this study, SAC305 and SAC305-0.3Ni solder balls were soldered onto Cu, high temperature treated Cu (H-Cu) and graphene coated Cu (G-Cu) substrates, respectively. The microstructure, the interfacial reaction, and the hardness of the solder joints were investigated. The interfacial intermetallic compound (IMC) is Cu₆Sn<sub>5</sub...

Research on the mechanical, thermal, induction heating and healing properties of steel slag/steel fibers composite asphalt mixture

In this paper, steel slag/steel fiber composite asphalt mixture were prepared. The effects of the addition of steel slag and/or steel fibers on the mechanical, thermal, induction heating and healing properties of asphalt mixture were investigated. The results showed that adding steel slag and/or steel fibers improves the water stability,...