Searched for: +
(1 - 20 of 20)
List view
Grid view
document
Zhang, Liang (author), Li, Guang (author), Chen, Huang (author), Tang, Jingtian (author), Yang, Guanci (author), Yu, Mingbiao (author), Hu, Yong (author), Xu, Jun (author), Sun, J. (author)
Audio magnetotelluric (AMT) is commonly used in mineral resource exploration. However, the weak energy of AMT signals makes them susceptible to being overwhelmed by noise, leading to erroneous geophysical interpretations. In recent years, deep learning has been applied to AMT denoising and has shown better denoising performance compared to...
journal article 2024
document
Jiao, Yutie (author), Li, Zongkun (author), Ge, Wei (author), Jing, Laihong (author), Wu, Meimei (author), Wang, Te (author), Sun, Heqiang (author), Wang, Jianyou (author), Zhang, Xiangyang (author), van Gelder, P.H.A.J.M. (author)
In recent years, dam failures have occurred frequently because of extreme weather, posing a significant threat to downstream residents. The establishment of emergency shelters is crucial for reducing casualties. The selection of suitable shelters depends on key information such as the number and distribution of affected people, and the...
journal article 2024
document
Chi, Lin (author), Li, Mengxuan (author), Zhang, Qianrui (author), Liang, X. (author), Huang, Chendong (author), Peng, Bin (author), Sun, Haisheng (author)
Cementitious materials are well acknowledged as one of the most adaptable materials for immobilizing heavy metals. Belite calcium sulfoaluminate cement (BCSA), one of the low-carbon alternative binders to cement with superior properties regarding chemical resistance and mechanical properties, is found with a desirable capability for waste...
journal article 2023
document
Li, Yonghao (author), Zhang, Ning (author), Sun, Renjuan (author), Guan, Yanhua (author), Liu, Lemin (author), Tian, Changjin (author), Ling, Yifeng (author), Zhang, Hongzhi (author), Šavija, B. (author)
The performance of engineered cementitious composites (ECCs) under coupled salt freezing and loaded conditions is important for its application on the transportation infrastructure. However, in most of the studies, the specimens were generally loaded prior to the freezing. The influence of sustained load was merely considered. To this end,...
journal article 2023
document
Wang, Te (author), Li, Zongkun (author), Ge, W. (author), zhang, Z.H. (author), Zhang, Yadong (author), Sun, Heqiang (author), Jiao, Yutie (author)
Compared with a single reservoir, the risk in cascade reservoirs has the transmission and superposition effect, which increases the complexity of its risk consequence assessment. In view of this problem, the direct consequence (DC) and potential consequence (PC) were defined as two parts of the dam breach risk consequence of cascade reservoirs....
journal article 2023
document
Wang, Te (author), Li, Zongkun (author), Ge, W. (author), Zhang, Yadong (author), Jiao, Yutie (author), Sun, Heqiang (author), Zhang, Hua (author)
Because of the risk transmission and superposition among dams in cascade reservoirs, the analysis and probability calculation of dam risk become more complex compared with a single reservoir. By analyzing the main risk sources and actionmechanisms, the disaster-causing factors, disaster-transmitting body and disaster-bearing body in the cascade...
journal article 2022
document
Zhang, Boyang (author), Sun, Xiuxia (author), Lv, Maolong (author), Liu, Shuguang (author), Li, Le (author)
In contrast with most existing results concerning unmanned aerial vehicles (UAVs) wherein material points or only attitude/longitudinal dynamics are considered, this article proposes a distributed fixed-time fault-tolerant control methodology for networked fixed-wing UAVs whose dynamics are six-degree-of-freedom with twelf-state-variables...
journal article 2022
document
Li, Shizhen (author), Liu, Yang (author), Ye, H. (author), Liu, X. (author), Sun, Fenglian (author), Fan, Xuejun (author), Zhang, Kouchi (author)
This paper studied the behaviors of sintering between Ag nanoparticle (NP) and nanoflake (NF) in the same size by molecular dynamics simulation. Before the sintering simulation, the melting simulation of NF was carried out to calculate the melting points of NFs and investigate the thermostability of NF. The Lindemann index and potential...
journal article 2022
document
Ji, Y. (author), Li, Ni (author), Cheng, Zhanming (author), Fu, Xiaoqian (author), Sun, Xiaoguang (author), Chowwanonthapunya, Thee (author), Zhang, Dawei (author), Ren, Jingli (author), Dey, P. (author), Dong, Chaofang (author)
Corrosion jeopardizes the materials longevity and engineering safety, hence the corrosion rate needs to be forecasted so as to better guide materials selection. Although field exposure experiments are dependable, the prohibitive cost and their time-consuming nature make it difficult to obtain large dataset for machine learning. Here, we...
journal article 2022
document
Ren, Jie (author), Sun, Hongfang (author), Li, Qun (author), Li, Z. (author), Zhang, Xiaogang (author), Wang, Yanshuai (author), Li, Linfei (author), Xing, Feng (author)
In this research, the effects of natural seawater (SW) on the properties of alkali-activated slag/fly ash (AASF) are studied. AASF prepared with deionized water is set as the reference mixture. The results showed that the use of natural SW resulted in a prolonged setting time and lower heat release, but no obvious impact on the flowability of...
journal article 2022
document
Wang, Te (author), Li, Zongkun (author), Ge, W. (author), Zhang, Yadong (author), Jiao, Yutie (author), Zhang, Hua (author), Sun, Heqiang (author), van Gelder, P.H.A.J.M. (author)
Risk assessment of cascade reservoir dams is not only the key to ensure the safety of the basin, but also the objective requirement of dam risk management. Based on the development status of cascade reservoirs in China, the complexity of dam risk management of cascade reservoirs compared with a single reservoir was analyzed. By reviewing the...
journal article 2022
document
Lv, Miao (author), Li, Dongyi (author), Zhang, Zhaohan (author), Logan, Bruce E. (author), van der Hoek, J.P. (author), Sun, Muchen (author), Chen, Fan (author), Feng, Yujie (author)
Magnetic seeding coagulation (MSC) process has been used to accelerate flocs sedimentation with an applied magnetic field, offering large handling capacity and low energy consumption. The interactions of three typical Al species, aluminum chloride (AlCl<sub>3</sub>), Al<sub>13</sub>O<sub>4</sub>(OH)<sub>24</sub><sup>7+</sup> polymer (Al<sub...
journal article 2021
document
Ren, Jie (author), Sun, Hongfang (author), Li, Qun (author), Li, Z. (author), Ling, Li (author), Zhang, Xiaogang (author), Wang, Yanshuai (author), Xing, Feng (author)
One-part alkali-activated slag (AAS) binders are more promising in large-scale constructions because one-part mixing procedure is safer and easier to handle compared to normal two-part method. Thus, this study aims at investigating different properties of one-part AAS binders and control samples prepared using the two-part method. Experimental...
journal article 2021
document
Sun, Y. (author), Kang, Xuanwu (author), Zheng, Yingkui (author), Wei, Ke (author), Li, Pengfei (author), Wang, Wenbo (author), Liu, Xinyu (author), Zhang, Kouchi (author)
The optimization of mesa etch for a quasi-vertical gallium nitride (GaN) Schottky barrier diode (SBD) by inductively coupled plasma (ICP) etching was comprehensively investigated in this work, including selection of the etching mask, ICP power, radio frequency (RF) power, ratio of mixed gas, flow rate, and chamber pressure, etc. In particular...
journal article 2020
document
Sun, J. (author), Zhang, Shuo (author), Zhan, Teng (author), Liu, Zewen (author), Wang, Junxi (author), Yi, Xiaoyan (author), Li, Jinmin (author), Sarro, Pasqualina M (author), Zhang, Kouchi (author)
A high responsivity and controllable recovery ultraviolet (UV) photodetector based on a tungsten oxide (WO<sub>3</sub>) gate AlGaN/GaN heterostructure with an integrated micro-heater is reported for the first time. The WO<sub>3</sub>nanolayer was deposited by physical vapor deposition (PVD) for deep UV absorption and the micro-heater was...
journal article 2020
document
Li, Huajian (author), Sun, Deyi (author), Wang, Zhen (author), Huang, Fali (author), Yi, Zhonglai (author), Yang, Zhengxian (author), Zhang, Y. (author)
Pumping is the most common technique used to transport fresh concrete in construction sites. The large-scale use of concrete all over the world makes the pumping increasingly important. A wide variety of additives and admixtures are incorporated into modern concrete in order for sustainable development. The performance of modern concrete is...
journal article 2020
document
Ge, W. (author), Jiao, Yutie (author), Sun, Heqiang (author), Li, Zongkun (author), Zhang, Hexiang (author), Zheng, Yan (author), Guo, Xinyan (author), Zhang, Zhaosheng (author), van Gelder, P.H.A.J.M. (author)
Dam breach has catastrophic consequences for human lives and economy. In previous studies, empirical models are often, to a limited extent, due to the inadequacy of historical dam breach events. Physical models, which focus on simulating human behavior during floods, are not suitable for fast analysis of a large number of dams due to the...
journal article 2019
document
Li, Shengli (author), Liu, Y. (author), Zhang, H. (author), Cai, Hongming (author), Sun, Fenglian (author), Zhang, Kouchi (author)
In this study, SAC305 and SAC305-0.3Ni solder balls were soldered onto Cu, high temperature treated Cu (H-Cu) and graphene coated Cu (G-Cu) substrates, respectively. The microstructure, the interfacial reaction, and the hardness of the solder joints were investigated. The interfacial intermetallic compound (IMC) is Cu<sub>6</sub>Sn<sub>5</sub...
journal article 2018
document
Sun, B. (author), Fan, Xuejun (author), Li, Lei (author), Ye, H. (author), van Driel, W.D. (author), Zhang, Kouchi (author)
This paper studies the interaction of catastrophic failure of the driver and LED luminous flux decay for an integrated LED lamp with an electrolytic capacitor-free LED driver. Electronic thermal simulations are utilized to obtain the lamp's dynamic history of temperature and current for two distinct operation modes: constant current mode (CCM...
journal article 2017
document
Sokolovskij, R. (author), Sun, J. (author), Santagata, F. (author), Iervolino, E. (author), Li, S. (author), Zhang, G.Y. (author), Sarro, Pasqualina M (author), Zhang, Kouchi (author)
A method for highly controllable etching of AlGaN/GaN for the fabrication of high sensitivity HEMT based sensors is developed. The process consists of cyclic oxidation of nitride with O<sub>2</sub> plasma using ICP-RIE etcher followed by wet etching of the oxidized layer. Previously reported cyclic oxidation-based GaN etching obtained very...
journal article 2016
Searched for: +
(1 - 20 of 20)
List view
Grid view