Searched for:
(1 - 12 of 12)
document
Zheng, Junchao (author), Tang, Hailong (author), Chen, Min (author), Yin, F. (author)
As an evolutional concept of variable cycle engine, the adaptive cycle engine draws widely attention with high expectations. It combines a variable geometry schedule and component matching principles to demonstrate its advantages such as avoiding severe inlet spillage drag and the wide variable cycle characteristics. Thus, this paper aims at...
journal article 2017
document
Tang, H. (author), Ye, H. (author), Wong, K.Y. (author), Leung, Stanley Y.Y. (author), Fan, Jiajie (author), Chen, Xianping (author), Fan, Xuejun (author), Zhang, Kouchi (author)
The objective of this study is to quantitatively evaluate the impacts of LED components on the overdriving reliability of high power white LED chip scale packages (CSPs). The reliability tests under room temperature are conducted over 1000 h in this study on CSP LEDs with overdriving currents. A novel method is proposed to investigate the...
journal article 2017
document
Hu, Fa-Fei (author), Tang, H. (author), Ye, H. (author), Chen, X. (author), Zhang, Kouchi (author)
The sensing behavior of monolayer tin sulfide (SnS) for four gas molecules (NH<sub>3</sub>, NO<sub>2</sub>, CO, and H<sub>2</sub>O) are studied by the first-principle calculation based on density-functional theory. We calculate adsorption energy, adsorption distance, and Hirshfeld charge to estimate the adsorption ability of monolayer SnS for...
journal article 2017
document
Tang, H. (author), Ye, Huai-Yu (author), Chen, Xian-Ping (author), Qian, Cheng (author), Fan, Xue-Jun (author), Zhang, Kouchi (author)
In this paper, the heat transfer performance of the multi-chip (MC) LED module is investigated numerically by using a general analytical solution. The configuration of the module is optimized with genetic algorithm (GA) combined with a response surface methodology. The space between chips, the thickness of the metal core printed circuit board...
journal article 2017
document
Ye, H. (author), Hu, F.F. (author), Tang, H. (author), Yang, L.W. (author), Chen, X.P. (author), Wang, L.G. (author), Zhang, Kouchi (author)
In this work, the structural, electronic and optical properties of germanene and ZnSe substrate nanocomposites have been investigated using first-principles calculations. We found that the large direct-gap ZnSe semiconductors and zero-gap germanene form a typical orbital hybridization heterostructure with a strong binding energy, which shows...
journal article 2018
document
Liu, Jikai (author), Gaynor, Andrew T. (author), Chen, Shikui (author), Kang, Zhan (author), Suresh, Krishnan (author), Takezawa, Akihiro (author), Li, Lei (author), Kato, Junji (author), Tang, Jinyuan (author), Wang, C.C. (author), Cheng, Lin (author), Liang, Xuan (author), To, Albert. C. (author)
Manufacturing-oriented topology optimization has been extensively studied the past two decades, in particular for the conventional manufacturing methods, for example, machining and injection molding or casting. Both design and manufacturing engineers have benefited from these efforts because of the close-to-optimal and friendly-to-manufacture...
journal article 2018
document
Chen, Min (author), Jia, Zihao (author), Tang, Hailong (author), Xiao, Yi (author), Yang, Yonghang (author), Yin, F. (author)
Supersonic civil aircraft is of a promising area in the development of future civil transport, and aircraft propulsion system is one of the key issues which determine the success of the aircraft. To get a good conceptual design and performance investigation of the supersonic civil aircraft engine, in this article, a fast, versatile as well as...
journal article 2019
document
Zhang, Chi (author), Tang, Qiuhong (author), Chen, Deliang (author), van der Ent, R.J. (author), Liu, Xingcai (author), Li, Wenhong (author), Haile, Gebremedhin Gebremeskel (author)
Precipitation on the Tibetan Plateau (TP) showed different spatial changes during 1979-2016, with an increasing trend over the northern Tibetan Plateau (NTP) and a slightly negative trend over the southern Tibetan Plateau (STP). The changes in precipitation moisture sources over the NTP and STP are investigated using the improved Water...
journal article 2019
document
Han, Rui (author), Liu, Chi Harold (author), Li, Shilin (author), Chen, Y. (author), Wang, Guoren (author), Tang, Jian (author), Ye, Jieping (author)
The core of many large-scale machine learning (ML) applications, such as neural networks (NN), support vector machine (SVM), and convolutional neural network (CNN), is the training algorithm that iteratively updates model parameters by processing massive datasets. From a plethora of studies aiming at accelerating ML, being data parallelization...
journal article 2019
document
Shen, X. J. (author), Li, D. Z. (author), Tang, S. (author), Chen, J. (author), Fang, H. (author), Wang, G. D. (author)
It is still a big challenge to obtain excellent low-temperature toughness for bulk steel materials. Delamination is an effective method to improve low-temperature toughness. In the present study, delamination toughening in a low carbon microalloyed steel plate with elongated and ultrafine-grained microstructure rolled in the dual-phase region...
journal article 2019
document
Chen, M. (author), Zhu, Li (author), Chen, Jingwen (author), Yang, Fenglin (author), Tang, Chuyang Y. (author), Guiver, Michael D. (author), Dong, Yingchao (author)
Highly efficient and economic treatment of wastewater sludges and wastewaters in one way is a challenging issue in the water treatment field. Herein we present a waste-to-resource strategy for rational fabrication of low–cost ceramic membranes, which simultaneously addresses the treatment of heavy metal-laden sludges and the separation of oil...
journal article 2020
document
Zou, Sheng (author), Xiao, Hanbin (author), Ye, Fangping (author), Li, Z. (author), Tang, Wenzhi (author), Zhu, Feng (author), Chen, Chentong (author), Zhu, Chao (author)
The inevitably formed residual stress in the Selective Laser Melting (SLM) process leads to distortion, crack and even delamination of the workpiece. Single laser is commonly applied during SLM processing. However, its productivity is much lower than multiple lasers. In addition, the research of residual stress with multi-laser condition...
journal article 2020
Searched for:
(1 - 12 of 12)