Lightweight aggregate concrete with foamed binder matrix for sustainable applications

Low density load bearing structural concrete members with improved thermal insulation properties, composed of lightweight aggregate (LWA) and foam concrete is investigated, which expands the application range of lightweight structural materials. This study aims to characterize a lightweight aggregate concrete with a foamed cementitious matrix ...

Effects of the pre-absorption of superabsorbent polymers and the water-cement ratio of paste on the adsorption-desorption of superabsorbent polymers: an NMR study

As an internal curing material, superabsorbent polymers (SAPs) can effectively reduce the risk of volume shrinkage of cement-based materials. By preparing the cement paste mixed with SAPs, the amount of pre-absorbed water and the water-cement ratio of paste on the water absorption-release behavior in the fresh cement paste were studied by using...

The effect of sulfate-rich sewage sludge ash on the volume deformation and micorstructure of cement paste

Sewage sludge ash (SSA) is the combustion residue of the sewage sludge obtained from wastewater treatment plants. In China, SSA normally contains high content of SO3, which may cause detrimental effect on the volume stability of cement-based materials. This study investigated the effect of sulfate-rich SSA (SR-SSA) on the volume deformation and...

Will ortho-enriched water increase the durability of concrete?

Water molecules exist as two spin isomers, differing by the relative orientation of the nuclear spins of the two hydrogen atoms: either antiparallel (para-water, S=0) or parallel (ortho-water, S=1) [1]. The transition between these nuclear spin states can be achieved through magnetic symmetry breaking via a field gradient across the spins...

Characteristics of fly ash blended mortars under ammonium chloride solution leaching

Characteristics of fly ash(FA) blended mortars (50%, 70% and 90%) at different curing ages (28 days and 180 days) under ammonium chloride solution(ACS) leaching were investigated. Mass loss under leaching, initial CaO content, Ca(OH)2 content(CH), content of chemical bonded water, and hydration degree of blended pastes were tested by XRF and DSC...

Visualization for the Coherent Set of 3D Property Units

There are many 3D objects with denser aggregation that they are fully/partly coherent touched with each other through shared facets, which we called coherent set of 3D objects. Visualization for 3D property unit is an effective way to understand 3D spatial occupation, location and relationship in urban space, particularly in the coherent set of...

Whole failure process analysis for jointed rock masses based on coupling method of DDA and FEM

The elastic-plastic mechanical behaviour is a typical characteristic of rock mass. The load action will bring on the local destruction, large deformation, even whole failure of rock mass with the discontinuous mediums (e.g. joint, crack and fault). It is a coupling process of the continuous deformation and the discontinuous deformation. The...

Double diffusive convection between two parallel plates with different boundary conditions

We investigate the double diffusive convection between two parallel plates with either no-slip or free-slip boundary conditions. Direct numerical simulations have been conducted systematically for a series of control parameters. Salt fingers can be observed for both boundary conditions and all parameters explored. Compared to the no-slip case,...

Turbulent skin-friction drag reduction by travelling waves induced by spanwise Lorentz force

The streamwise and spanwise travelling waves induced by spanwise Lorentz force are studied for skin-friction drag reduction in a turbulent channel. The streamwise travelling wave by spanwise Lorentz force on drag reduction is compared to the with the spanwise wall motion. The drag reduction map shows a drag reduction region and a drag increase...

The Conversion from CityGML to 3D Property Units

Due to the fast growth of building construction technology and increasing demands on the efficient use of land, human living space are expanded from on the surface to above and under the earth surface. It raises the need for three dimentional (3D) cadastral by realizing that the current cadastral system based on 2D is not appropriate to reflect...

The effect of grain size on the mechanical properties and the oxidation induced crack healing efficiency of CR2ALC ceramic

Abstract only.

Microstructure evolution of Cr2AlC ceramic before and after oxidation induced crack healing

Abstract only.

Analysing mental geography of residential environment in Singapore using GIS-based 3D visibility analysis

Workshop 2. Session 2.3: Mapping home Abstract. Residences’ mental perception, especially spatial perceptions of their built-environment is crucial in shaping their overall quality of life and environmental perception. The increasing intangibility of mental geography may be caused by lack of empirical and quantitative approach. We will introduce...

Advances in chloride diffusion of concrete exposed to marine field environment

For elaborating the research significance, goal, content and representative results of the concrete marine field exposure experiments all over the world, we have collected a large number of research literature since 1905. The longest exposure test for concrete has reached 62 years and, most importantly, concrete exposure experiments have made...