Searched for: +
(1 - 20 of 1,840)

Pages

document
Zhang, H. (author)
This thesis describes the analysis, design, prototype implementation, and measurement results of high-performance Class-D amplifiers (CDAs) for audio applications.
doctoral thesis 2024
document
Zhang, Y. (author)
Wind energy is one of themost important renewable energy sources, effectively addressing climate change issues and promoting sustainable development on a global scale. Blade failures may cause long shut-down times and may present a safety hazard. Continuous and real-time monitoring of the blade conditions is helpful for finding blade damage at...
doctoral thesis 2024
document
Zhang, M. (author)
Food and medicines are two of the most essential categories of goods for human beings, providing vital nourishment and healthcare. However, as these products are commercialized and distributed on a global scale, consumers face the threat of counterfeit and deteriorated products. In response, this dissertation presents four prototypes consisting...
doctoral thesis 2024
document
Zhang, H. (author)
In recent decades, dielectric lens antennas have been more and more adopted and developed for sensing and imaging applications at sub-millimeter (sub-mm) wavelengths because they can achieve high gain while keeping their physical size and weight acceptable at these wavelengths. More recently, as low-loss and low-cost lens materials have become...
doctoral thesis 2024
document
Schweidtmann, A.M. (author), Zhang, Dongda (author), von Stosch, Moritz (author)
The term hybrid modeling refers to the combination of parametric models (typically derived from knowledge about the system) and nonparametric models (typically deduced from data). Despite more than 20 years of research, over 150 scientific publications (Agharafeie et al., 2023), and some recent industrial applications on this topic, the...
review 2024
document
Wang, Ranran (author), Zhang, Jun (author), Lu, Yijun (author), Ren, S. (author), Huang, Jiandong (author)
The design of geopolymer concrete must meet more stringent requirements for the landscape, so understanding and designing geopolymer concrete with a higher compressive strength challenging. In the performance prediction of geopolymer concrete compressive strength, machine learning models have the advantage of being more accurate and faster....
journal article 2024
document
Zhu, Xuezhen (author), Zhang, Minghu (author), Shi, Jinyan (author), Weng, Yiwei (author), Yalçınkaya, Çağlar (author), Šavija, B. (author)
High-strength engineered cementitious composites (ECC) typically require higher cement content, which is negative from the sustainability point of view. To alleviate this problem, herein a low-cost and eco-friendly high-strength ECC (with a compressive strength of over 100 MPa) was developed, and diatomite was used to replace a small amount...
journal article 2024
document
Wang, Ran (author), Wang, Tongbing (author), Lee, Chia-Jung (author), Liu, Zhengxuan (author), Zhang, G. (author)
To explore factors that influence the likelihood of committing fraud in the construction industry, this study concentrated on senior executives and tested whether some characteristics at the individual and firm levels have impacts on the likelihood of fraud committed by top management. Based on social network theory, this study first proposes...
journal article 2024
document
Peng, Y. (author), Zhang, Guanting (author), Nijhuis, S. (author), Agugiaro, G. (author), Stoter, J.E. (author)
Historic gardens, regarded as a significant genre of cultural heritage, encapsulate the enduring essence of bygone eras while concurrently transcending temporal boundaries to resonate with the present and future. These gardens provide us vitality and inspiration, holding a collective repository of human memory and serving as a testament to our...
journal article 2024
document
Zhang, Ying (author), Robu, Valentin (author), Cremers, S.A. (author), Norbu, Sonam (author), Couraud, Benoit (author), Andoni, Merlinda (author), Flynn, David (author), Poor, H. Vincent (author)
Peer-to-peer (P2P) energy trading and energy communities have garnered much attention over in recent years due to increasing investments in local energy generation and storage assets. Much research has been performed on the mechanisms and methodologies behind their implementation and realisation. However, the efficiency to be gained from P2P...
journal article 2024
document
Adler, Benjamin A. (author), Trinidad, Marena I. (author), Bellieny-Rabelo, Daniel (author), Zhang, Elaine (author), Karp, Hannah M. (author), Skopintsev, Petr (author), Thornton, Brittney W. (author), Yoon, Peter H. (author), Brouns, S.J.J. (author)
CRISPR-Cas enzymes enable RNA-guided bacterial immunity and are widely used for biotechnological applications including genome editing. In particular, the Class 2 CRISPR-associated enzymes (Cas9, Cas12 and Cas13 families), have been deployed for numerous research, clinical and agricultural applications. However, the immense genetic and...
journal article 2024
document
Wang, J. (author), Li, Runlong (author), Zhang, Xinqi (author), He, Yuan (author)
As one of the crucial sensors for environment sensing, frequency modulated continuous wave (FMCW) radars are widely used in modern vehicles for driving assistance/autonomous driving. However, the limited frequency bandwidth and the increasing number of equipped radar sensors would inevitably cause mutual interference, degrading target...
journal article 2024
document
Medaglia, Rony (author), Rukanova, B.D. (author), Zhang, Ziyan (author)
The transition from a linear economy towards a circular economy (CE), based on reusing, repairing, refurbishing, and recycling existing materials and products, is one of the key priorities in pursuing Sustainable Development Goals (SDGs), where governments play a fundamental role, with the support of digital technologies.<br/><br/>Despite the...
journal article 2024
document
Zhou, Yimin (author), Gillavry, Merlijn Mac (author), Yang, Pengzhi (author), Xu, Zihao (author), Zhang, Baitian (author), Bidarra, Rafael (author)
As one of the most disruptive human-computer interaction techniques, Virtual Reality (VR) provides a novel way to examine human movements, e.g. when investigating Body Ownership (BO) in the field of cognitive sciences, especially when the visual output diverges from real-world actions. Previous research in BO uses questionnaires and brain...
conference paper 2024
document
Zhang, S. (author), Li, Yuhang (author), Bannenberg, L.J. (author), Liu, Ming (author), Ganapathy, S. (author), Wagemaker, M. (author)
Formation cycling is a critical process aimed at improving the performance of lithium ion (Li-ion) batteries during subsequent use. Achieving highly reversible Li-metal anodes, which would boost battery energy density, is a formidable challenge. Here, formation cycling and its impact on the subsequent cycling are largely unexplored. Through...
journal article 2024
document
Tang, Zhuorui (author), Gu, Lin (author), Jin, Lei (author), Dai, Kefeng (author), Mao, Chaobin (author), Wu, Sanzhong (author), Zhang, Rongwei (author), Yang, Jinsong (author), Zhang, Kouchi (author)
In this work, 4H-SiC homoepitaxial layers were grown on 4°off-axis substrates at different susceptor rotation speeds by using a hot-wall horizontal CVD reactor. The effect of different susceptor rotation speed on the quality of 4H-SiC epitaxial layers in terms of thickness, thickness uniformity, crystallinity, surface morphology and...
journal article 2024
document
Zhang, Liang (author), Li, Guang (author), Chen, Huang (author), Tang, Jingtian (author), Yang, Guanci (author), Yu, Mingbiao (author), Hu, Yong (author), Xu, Jun (author), Sun, J. (author)
Audio magnetotelluric (AMT) is commonly used in mineral resource exploration. However, the weak energy of AMT signals makes them susceptible to being overwhelmed by noise, leading to erroneous geophysical interpretations. In recent years, deep learning has been applied to AMT denoising and has shown better denoising performance compared to...
journal article 2024
document
Feng, Lichao (author), Yi, Shengjie (author), Zhao, Shuyuan (author), Zhong, Qiucheng (author), Ren, Feirong (author), Liu, C. (author), Zhang, Y. (author), Wang, Wenshou (author), Li, Zhenming (author)
Recycling aluminosilicate-based solid wastes is imperative to realize the sustainable development of constructions. By using alkali activation technology, aluminosilicate-based solid wastes, such as furnace slag, fly ash, red mud, and most of the bio-ashes, can be turned into alternative binder materials to Portland cement to reduce the carbon...
review 2024
document
Zhang, P. (author), He, C. (author), Shen, C. (author), Dollevoet, R.P.B.J. (author), Li, Z. (author)
Wheel-rail high-frequency interaction is closely related to the formation of railway short-wave defects. Finite element (FE) method has been widely used to simulate wheel-rail dynamic systems, but its validity in modelling high-frequency interaction has not been fully demonstrated in three dimensions (3D). This work aims at comprehensively...
journal article 2024
document
Castro-Alonso, Juan C. (author), Ayres, Paul (author), Zhang, S. (author), de Koning, Björn B. (author), Paas, Fred (author)
Research on embodied cognition acknowledges that cognitive processing is tightly coupled with bodily activities and the environment. An important implication for education is that learning can be enhanced when the brain, body, and environment mutually influence each other, such as when making or observing human actions, especially those...
review 2024
Searched for: +
(1 - 20 of 1,840)

Pages