Searched for:
(1 - 20 of 31)

Pages

document
Kutt, Lembit M. (author), Plaszczyk, Christopher M. (author), Chen, Yung-Kuang (author), Liu, Donald (author)
conference paper 1985
document
Wei, J. (author), Chen, Z.L. (author), Liu, Z.W. (author), Sarro, P.M. (author)
This paper presents a silicon MEMS capacitive structure to investigate a test methodology for fF-level capacitive sensors’ measurement. The device mimics a capacitive sensor with a changing intermediate layer between the electrodes. A single mask bulk micromachining process is used to fabricate the device, which has a nominal capacitance of 1.2...
journal article 2010
document
Chen, X. (author), Liu, X. (author), Qian, Z. (author), Lei, Z. (author)
Reliable and durable asphalt surfacing systems still remain to be desired for the long-spanned orthotropic steel bridges as the nationally and internationally reports on distresses in deck pavement. Based on ten-year research works, this paper has presented a brief review and discussion of the Chinese practices and experiences of deck pavement...
conference paper 2012
document
Chen, Y.C. (author), Liu, W. (author)
The interactions in IT supported activities in a Generation Y work context were studied and discussed, which general design guidelines have een revealed. However, further research about practical design guidelines hasn’t been performed. This study aims to serve as supplement of this part based on previous research. By applying contextual...
conference paper 2012
document
Tobón, L. (author), Chen, J. (author), Lee, J. (author), Yuan, M. (author), Zhao, B. (author), Liu, Q.H. (author)
Many system-level electromagnetic design problems are multiscale and very challenging to solve. They remain a significant barrier to system design optimization for a foreseeable future. Such multiscale problems often contain three electrical scales, i.e., the fine scale (geometrical feature size much smaller than a wavelength), the coarse scale ...
conference paper 2013
document
Yu, Q. (author), Chen, Y. (author), Liu, Z. (author), Van de Giesen, N.C. (author), Zhu, D. (author)
Algal blooms have been frequently found at the upper reaches of the Tanglang River, which is downstream from the eutrophic Dianchi Lake. The eutrophic lake upstream is considered to be a potential source of phytoplankton, which contributes to the development of harmful algal blooms in the river downstream and can cause many serious problems for...
journal article 2015
document
Levy, MC (author), Garcia, M (author), Blair, P (author), Chen, X (author), Gomes, S.L. (author), Gower, DB (author), Grames, J (author), Kuil, L (author), Liu, Y (author), Marston, L (author), McCord, PF (author), Roobavannan, M (author), Zeng, R (author)
journal article 2016
document
Liu, Xiaoming (author), Dai, Ji (author), Wu, Di (author), Jiang, Feng (author), Chen, Guanghao (author), Chui, Ho Kwong (author), van Loosdrecht, M.C.M. (author)
Global water security is a severe issue that threatens human health and well-being. Finding sustainable alternative water resources has become a matter of great urgency. For coastal urban areas, desalinated seawater could serve as a freshwater supply. However, since 20%–30% of the water supply is used for flushing waste from the city,...
journal article 2016
document
Chen, J. (author), Liu, Xian (author), Ye, G. (author)
Microcracks play vital roles in the prediction of the service life of concrete structure. Because microcracks in concrete structure are the preferential ingression channels for aggressive ions, e.g., chloride, sulphate, etc. However, microcracks have potentials to self-heal autogenously due to the continuous hydration of unhydrated cement,...
conference paper 2016
document
Chen, G. (author), Liu, Y. (author), Lodewijks, G. (author), Schott, D.L. (author)
The handling of iron ore bulk solids maintains an increasing trend due to economic development. Because iron ore particles have hard composites and irregular shapes, the bulk solids handling equipment surface can suffer from severe sliding wear. Prediction of equipment surface wear volume is beneficial to the efficient maintenance of worn areas....
journal article 2017
document
Liu, Z. (author), Chen, Kai (author), Li, Z. (author), Jiang, X. (author)
Fiber-reinforced polymer (FRP) has been increasingly applied to steel structures for structural strengthening or crack repair, given its high strength-to-weight ratio and high stiffness-to-weight ratio. Cracks in steel structures are the dominant hidden threats to structural safety. However, it is difficult to monitor structural cracks under...
journal article 2017
document
Abrahamsen, Asger Bech (author), Liu, D. (author), Magnusson, Niklas (author), Thomas, A (author), Z., Azar (author), Stehouwer, Ewoud (author), Hendriks, E (author), Penzkofer, A. (author), Atallah, K (author), Dragan, R.R. (author), .Clark, R.E. (author), Deng, F. (author), Chen, Z (author), Karwatzki, D. (author), Mertens, A. (author), Parker, M. (author), Finney, SJ (author), Polinder, H. (author)
Innovative drive trains targeted at 10-20 MW offshore turbines are investigated in the INNWIND.EU project in order to determine the impact on the Levelized Cost of Energy (LCoE) resulting when installed in the ,North sea at 50 m of water [1]. The two main technologies studied are superconducting direct drive (SCDD)[2] and the magnetic pseudo...
abstract 2017
document
Wang, H. (author), Nunez, Alfredo (author), Dollevoet, R.P.B.J. (author), Liu, Zhigang (author), Chen, Junwen (author)
This study proposes a Bayesian network (BN) dedicated for the intelligent condition monitoring of railway catenary systems. It combines five types of measurements related to catenary condition, namely the contact wire stagger, contact wire height, pantograph head displacement, pantograph head vertical acceleration and pantograph-catenary contact...
conference paper 2017
document
Chen, B. (author), Liu, Hui (author), Zeferino Ribeiro De Souza, F. (author), Liu, Lan (author)
Chiral cyclic β-hydroxy ketones represent key motifs in the production of natural products of biological interest. Although the molecules are structurally simple, they require cumbersome synthetic steps to get access to them and their synthesis remains a challenge in organic chemistry. In this report, we describe a straightforward approach to...
journal article 2017
document
Wu, Yue (author), Liu, Xiuming (author), Li, Q. (author), Chen, Boxuan (author), Luo, Peng (author), Pronk, Arno (author), Mergny, Elke (author)
By using inflatable moulds and then spraying cellulose-water mixture, one ice dome and two ice towers were built in Harbin in December 2016. During the whole process, form-finding of the inflatable moulds as well as the construction of these ice composite shell structures are very important for the final results.<br/>The mould for the ice dome...
conference paper 2017
document
Liu, C. (author), Malladi, S.R.K. (author), Xu, Q. (author), Chen, Jianghua (author), Tichelaar, F.D. (author), Zhuge, Xiaodong (author), Zandbergen, H.W. (author)
Age-hardening in Al alloys has been used for over a century to improve its mechanical properties. However, the lack of direct observation limits our understanding of the dynamic nature of the evolution of nanoprecipitates during age-hardening. Using in-situ (scanning) transmission electron microscopy (S/TEM) while heating an Al-Cu alloy, we...
journal article 2017
document
Liu, Jikai (author), Gaynor, Andrew T. (author), Chen, Shikui (author), Kang, Zhan (author), Suresh, Krishnan (author), Takezawa, Akihiro (author), Li, Lei (author), Kato, Junji (author), Tang, Jinyuan (author), Wang, C.C. (author), Cheng, Lin (author), Liang, Xuan (author), To, Albert. C. (author)
Manufacturing-oriented topology optimization has been extensively studied the past two decades, in particular for the conventional manufacturing methods, for example, machining and injection molding or casting. Both design and manufacturing engineers have benefited from these efforts because of the close-to-optimal and friendly-to-manufacture...
journal article 2018
document
Yang, Ning (author), Yang, Daoguo (author), Zhang, G.Q. (author), Chen, Liangbiao (author), Liu, Dongjing (author), Cai, Miao (author), Fan, Xuejun (author)
The effects of graphene stacking are investigated by comparing the results of methane adsorption energy, electronic performance, and the doping feasibility of five dopants (i.e., B, N, Al, Si, and P) via first-principles theory. Both zigzag and armchair graphenes are considered. It is found that the zigzag graphene with Bernal stacking has...
journal article 2018
document
Liu, C. (author), Cheng, Gang (author), Chen, Xihui (author), Pang, Y. (author)
Given local weak feature information, a novel feature extraction and fault diagnosis method for planetary gears based on variational mode decomposition (VMD), singular value decomposition (SVD), and convolutional neural network (CNN) is proposed. VMD was used to decompose the original vibration signal to mode components. The mode matrix was...
journal article 2018
document
Liu, L. (author), Qu, B. (author), Chen, Bin (author), Hanjalic, A. (author), Wang, H. (author)
Traces of user activities recorded in online social networks open new possibilities to systematically understand the information diffusion process on social networks. From the online social network WeChat, we collected a large number of information cascade trees, each of which tells the spreading trajectory of a message/information such as which...
journal article 2018
Searched for:
(1 - 20 of 31)

Pages