Pages
- 1
- 2
- document
-
Sider, A. (author), Di Fronzo, C. (author), Amez-Droz, L. (author), Amorosi, A. (author), Badaracco, F. (author), Baer, P. (author), Bruno, G. (author), Cebeci, P. (author), Loicq, J.J.D. (author)To achieve the expected level of sensitivity of third-generation gravitational-wave (GW) observatories, more accurate and sensitive instruments than those of the second generation must be used to reduce all sources of noises. Amongst them, one of the most relevant is seismic noise, which will require the development of a better isolation...journal article 2023
- document
-
Zhang, Gangqiang (author), Zheng, Ganlin (author), Ren, Tianhui (author), Zeng, Xiangqiong (author), van der Heide, E. (author)In order to reduce the damage to tissue and fill the interstices between fibers, multifilament sutures are frequently treated with certain coating materials. The objective of this study was to create and characterize dopamine hydrochloride (DA) and carboxymethyl chitosan (CMCS) coatings on surgical sutures and investigate their effects on the...journal article 2020
- document
-
Abbel, Robert (author), de Vries, Ike (author), Langen, Arjan (author), Kirchner, Gerwin (author), t’Mannetje, Hero (author), Gorter, Harrie (author), Wilson, Joanne (author), Groen, W.A. (author)The large volume production of flexible electronics by solution based roll-to-roll (R2R) manufacturing technologies is a promising upscaling strategy for the organic electronics industry. Typical optoelectronic devices like organic light emitting diodes (OLEDs) consist of a complex stack of functional layers. Solution deposition of these...journal article 2017
- document
-
Visser, P. (author), Meeusen, M. (author), Gonzalez Garcia, Y. (author), Terryn, H.A. (author), Mol, J.M.C. (author)This work presents the electrochemical evaluation of protective layers generated in a coating defect from lithium-leaching organic coatings on AA2024-T3 aluminum alloys as a function of neutral salt spray exposure time. Electrochemical impedance spectroscopy was used to study the electrochemical properties on a macroscopic scale. An...journal article 2017
- document
-
Abdolah Zadeh, M. (author)Inspired by the state of the art and the recent advances in the field of self-healing corrosion protective coatings, the thesis entitled “Self-healing corrosion protective sol-gel coatings” addresses novel routes to self-healing corrosion protective sol-gel coatings via extrinsic and intrinsic healing approaches. The employed approaches aim at...doctoral thesis 2016
- document
-
De Koster, S.A.L. (author), Mors, R.M. (author), Nugteren, H.W. (author), Jonkers, H.M. (author), Meesters, G.M.H. (author), Van Ommen, J.R. (author)Concrete structures are often reinforced with steel. In order for the reinforcement to take over tensile forces, concrete has to crack. Through such cracks, water and compounds that are harmful to concrete can enter. This can cause durability issues like leakage, concrete degradation and reinforcement corrosion. In situ repair of cracks is often...journal article 2015
- document
-
Valdesueiro Gonzalez, D. (author), Meesters, G.M.H. (author), Kreutzer, M.T. (author), Van Ommen, J.R. (author)We have deposited aluminium oxide films by atomic layer deposition on titanium oxide nanoparticles in a fluidized bed reactor at 27 ± 3 °C and atmospheric pressure. Working at room temperature allows coating heat-sensitive materials, while working at atmospheric pressure would simplify the scale-up of this process. We performed 4, 7 and 15...journal article 2015
- document
-
Pfeiffer, T.V. (author), Kedia, P. (author), Messing, M.E. (author), Valvo, M. (author), Schmidt-Ott, A. (author)This article introduces a continuous, gas-phase method for depositing thin metallic coatings onto (nano)particles using a type of physical vapor deposition (PVD) at ambient pressure and temperature. An aerosol of core particles is mixed with a metal vapor cloud formed by spark ablation by passing the aerosol through the spark zone using a hollow...journal article 2015
- document
-
Garcia Espallargas, S.J. (author), Wu, X. (author)Recently, encapsulated silyl esters have been shown to act as efficient healing agents for self-healing anticorrosive coatings. While the positive protective effects were irrefutable, the actual protection mechanism has not been clarified yet. In this study, x-ray computed ?-tomography and electrochemical impedance spectroscopy have been...conference paper 2013
- document
-
Garcia Espallargas, S.J. (author), Wu, X. (author)Recently, encapsulated silyl esters have been shown to act as efficient healing agents for self-healing anticorrosive coatings. While the positive protective effects were irrefutable, the actual protection mechanism has not been clarified yet. In this study, x-ray computed ?-tomography and electrochemical impedance spectroscopy have been...conference paper 2013
- document
-
Berger, O. (author), Leyens, C. (author), Heinze, S. (author), To Baben, M. (author), Schneider, J.M. (author)Self-healing materials allow for a design concept based on damage management where damage that is inflicted during operation can be healed autonomously. It has been shown that the Mn+1AXn phases Ti3AlC2, Ti2AlC and Cr2AlC exhibit autonomous self-healing behaviour. Cracks are filled and hence healed by oxidation products of the M and A elements...conference paper 2013
- document
-
Mathis, C. (author), Garcia Espallargas, S.J. (author)Encapsulation of reactive agents embedded within a matrix is the most studied concept to develop self-healing materials. The most common approaches employ either a single component with catalyst dispersed in the matrix or a single environment-reactive component for corrosion protection [1]. Recently an approach for corrosion protection based on...conference paper 2013
- document
-
Javierre, E. (author), Camanes, V. (author), Garcia Espallargas, S.J. (author), Van der Zwaag, S. (author), Garcia-Aznar, J.M. (author)A long-lasting barrier protection at damaged sites of coated system can be achieved by means of an active response of the primer. This may be attained through the release of reactive liquids from dispersed containers, the increase of the local mobility of the polymeric network, or the expansion of (dispersed elements in) the primer [1]. Such...conference paper 2013
- document
-
Gergely, R. (author), Krull, B. (author), Santa Cruz, W.A. (author), Moore, J. (author), Sottos, N. (author), White, S. (author)Abstract only.conference paper 2013
- document
-
Zheludkevich, M.L. (author), Tedim, J. (author), Ferreira, M.G.S. (author)Abstract only.conference paper 2013
- document
-
Javierre, E. (author), Camanes, V. (author), Garcia Espallargas, S.J. (author), Van der Zwaag, S. (author), Garcia-Aznar, J.M. (author)A long-lasting barrier protection at damaged sites of coated system can be achieved by means of an active response of the primer. This may be attained through the release of reactive liquids from dispersed containers, the increase of the local mobility of the polymeric network, or the expansion of (dispersed elements in) the primer [1]. Such...conference paper 2013
- document
- Garcia Espallargas, S.J. (author), Fischer, H.R. (author), Gonzalez-Garcia, Y. (author), Mol, A.J.M.C. (author), Hughes, T. (author) conference paper 2011
- document
- Rey, R. (author), Javierre, E. (author), Perez, M.A. (author), Garcia Espallargas, S.J. (author), Van der Zwaag, S. (author), Garcia-Aznar, J.M. (author) conference paper 2011
- document
- De Graeve, I. (author), Muselle, T. (author), Scheltjens, G. (author), Brancart, J. (author), Gonzalez Garcia, Y. (author), Mol, J.M.C. (author), Van Assche, G. (author), Van Mele, B. (author), Terryn, H. (author) conference paper 2011
- document
-
Wu, Y. (author), Wang, Y.M. (author), Song, G.M. (author), Li, X.W. (author)Oxidation behavior of a Re-based diffusion barrier/Ni–Al coated single-crystal (SC) Ni-based TMS-82+ superalloy was studied to compare with those of the base and Ni–Al coated superalloys under cyclic air at 1150 °C for 200 h. The base superalloy showed a negative mass gain due to extensive oxide spallation, and the Ni–Al coated superalloy...journal article 2011
Pages
- 1
- 2