document

Electrochemical CO₂ Reduction on Copper in Propylene Carbonate: Influence of Water Content and Temperature on the Product Distribution

Burgers, I.A.E. (author), Pérez-Gallent, Elena (author), Goetheer, Earl (author), Kortlever, R. (author)

Aqueous electrolytes are most commonly used for the CO₂ reduction reaction (CO₂RR), but suffer from a low CO₂ solubility that limits the reaction. Electrochemical CO₂ reduction in nonaqueous electrolytes can provide a solution, due to the higher CO₂ solubility of organic solvent-based...

journal article 2023

document

Techno-economic analysis of PSA separation for hydrogen/natural gas mixtures at hydrogen refuelling stations

Burgers, Iris (author), Dehdari, Leila (author), Xiao, Penny (author), Li, Kevin Gang (author), Goetheer, Earl (author), Webley, Paul (author)

Logistics of hydrogen is one of the bottlenecks of a hydrogen economy. In this study, a pressure swing adsorption (PSA) system is proposed for the separation of hydrogen from natural gas, co-transported in the natural gas grid. The economic feasibility of hydrogen supplied by a PSA system at a refuelling station is assessed and compared with...

journal article 2022

document

Clay-plug sediment as the locus of arsenic pollution in Holocene alluvial-plain aquifers

Kumar, S. (author), Ghosh, D. (author), Donselaar, M.E. (author), Burgers, F. (author), Ghosh, Ashok Kumar (author)

Shallow aquifers in many Holocene alluvial basins around the world have in the last three decades been identified as arsenic pollution hotspots, in which the spatial variation of natural (or: geogenic) arsenic concentration is conditioned by the meandering-river geomorphology and the fluvial lithofacies distribution. Despite the large amount of...

journal article 2021

document

Smart sensor tights: Movement tracking of the lower limbs in football

Steijlen, A.S.M. (author), Burgers, D.B.J. (author), Wilmes, Erik (author), Bastemeijer, J. (author), Bastiaansen, Bram J.C. (author), French, P.J. (author), Bossche, A. (author), Jansen, K.M.B. (author)

This article presents a novel smart sensor garment with integrated miniaturized inertial measurements units (IMUs) that can be used to monitor lower body kinematics during daily training activities, without the need of extensive technical assistance throughout the measurements. The smart sensor tights enclose five ultra-light sensor modules that...

journal article 2021

document

Propagation mechanism of reverse bias induced defects in Cu(In,Ga)Se₂ solar cells

Bakker, N.J. (author), Åhman, Hanna Nilsson (author), Burgers, Teun (author), Barreau, Nicolas (author), Weeber, A.W. (author), Theelen, Mirjam (author)

Partial shading of monolithically interconnected Cu(In,Ga)Se₂ (CIGSe) modules can lead to the formation of reverse bias induced defects. These localized defects permanently reduce the output of the PV module. The formation and propagation mechanisms of these defects is studied. Understanding these mechanisms can help to prevent or...

journal article 2020

document

Bollard loads on new port infrastructure, port of Rotterdam authority policy

Broos, E.J. (author), Hoebee, W. (author), van Scherpenzeel, B.R.J. (author), Burgers, J.J. (author), Schweter, L. (author), van Deyzen, A. (author)

Mooring of vessels is very important for safe and efficient cargo handling of ships in ports, just as safe infrastructure is important. Civil Engineers and Mariners used to have a different approach for the same problem: what should be the safe working load (SWL) of a bollard. Mariners use the Minimum Breaking Load (MBL) of their mooring lines...

conference paper 2018

document

Optimal endobronchial tool sizes for targeting lung lesions based on 3D modeling

Bydlon, Torre M. (author), Langhout, Gerrit C. (author), Lalezari, Ferry (author), Hartemink, Koen J. (author), Nijkamp, Jasper (author), Brouwer de Koning, Susan G. (author), Burgers, Sjaak (author), Hendriks, B.H.W. (author), Ruers, Theodoor J.M. (author)

Background For patients with suspicious lung lesions found on chest x-ray or CT, endo/trans- bronchial biopsy of the lung is the preferred method for obtaining a diagnosis. With the addition of new screening programs, a higher number of patients will require diagnostic biopsy which will prove even more challenging due to the small size of...

journal article 2017

document

Plan of approach SBW wind modelling

Groeneweg, J. (author), Burgers, G. (author), Caires, S. (author), Feijt, A. (author)

This report presents the joint KNMI and Deltares Plan of Approach for the wind modelling activities for the coming years, with the goal to determine time and spatially varying extreme wind fields. These are required as input for the 2017 safety assessment of the primary water defences. The objectives of the project have been defined as follows:...

report 2011

document

Enhancement of aircraft cabin comfort studies by coupling of models for human thermoregulation, internal radiation, and turbulent flows

Kok, J.C. (author), Van Muijden, J. (author), Burgers, S.S. (author), Dol, H. (author), Spekreijse, S.P. (author)

Scientific enhancement of the analysis of thermal comfort aspects in aircraft cabins is the subject of the current investigation. For this purpose, three important processes are identified that play a significant role in thermal comfort, viz. the human response to its thermal environment which is also known as thermoregulation, the actual...

conference paper 2006

document

Zeolite catalyzed nucleophilic aromatic substitution reactions

Burgers, M.H.W. (author)

doctoral thesis 1995

document

Man-made Islands in the Mackenzie river: Numerical modelling of ice jam development and release

Loman, G.J.A. (author), De Jong, J.J.A. (author), Moir, J.R. (author), Burgers, A. (author), Verhagen, H.J. (author)

Man-made islands in the Mackenzie river (Canada) for oil exploitation may obstruct the free flow of ice during spring break up. These ice dams may cause considerable rise of the water level in the rivers, resulting in floods. A numerical model is presented to simulate ice dam formation an river floods.

conference paper 1983

document

Automatic crack length measurements by the electrical potential drop method with computer control

Burgers, A. (author), Kempen, P.D. (author)

report 1980

document

Meting van de scheurlengte in metaalplaat m.b.v. een electrische potentiaal methode

Burgers, A. (author), Ewalds, H.L. (author), van Gestel, G.F.J.A. (author), Vogelesang, L.B. (author)

report 1975

document

De potentiostaat van het laboratorium voor vormgeving en fabricage

Burgers, A. (author)

report 1971

document

De anodiseerautomaat (Beschrijving en bediening)

Burgers, A. (author)

report 1970

document

Voorlezen en vertellen

Burgers, W.G. (author)

public lecture 1967

document

Het gebruik en het ijken van gevoelige drukmeters

Burgers, A. (author)

report 1964

document

Technische Hogeschool Delft - Laboratorium voor Metaalkunde

Jongenburger, P. (author), Zuithoff, A.J. (author), Druyvesteyn, M.J. (author), Burgers, W.G. (author)

Beschrijving van het in 1961 gereed gekomen nieuwe gebouw voor Metaalkunde van de Technische Hogeschool Delft, op de hoek Jaffalaan / Rotterdamseweg te Delft. Het werd geopend op 4 oktober 1961. Het ontwerp is van het architectenbureau Van den Broek en Bakema. In het begin van de jaren 2000 werd het gesloopt. In het boekje ontbreekt helaas een...

book 1961

document

Metingen van fluctuaties in het toerental van de schroefmotor van de lage-turbulentiewindtunnel

Boeker, J. (author), Burgers, A. (author)

report 1959

document

Lecture notes on Turbulent Fluid Motion

Burgers, J.M. (author)

Lecture notes of prof. Burgers prepared during his sabbatical at CalTech.

lecture notes 1951